Instrukcja obsługi Tripp Lite PDU15NETLX

Tripp Lite Listwa zasilająca PDU15NETLX

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tripp Lite PDU15NETLX (20 stron) w kategorii Listwa zasilająca. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/20

Owner’s Manual

PDU15NETLX

Mini Switched PDU

120V, 50/60Hz AC Input and Output

(AG-019E)

Important Safety Instructions 2

Installation 3

Features 4

Configuration and Operation 6

Technical Support 6

Warranty and Product Registration 7

Español 8

Français 15

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an

ISOBAR6ULTRA surge protector—

a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

17-02-373-9336CA.indb 1 6/2/2017 2:08:37 PM

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be

followed during the installation, operation, and storage of this

product. Failure to heed these instructions and warnings may

affect the product warranty.

• The PDU provides the convenience of multiple outlets, but DOES NOT provide surge

or line noise protection for connected equipment.

• The PDU is designed for indoor use only, in a controlled environment, away from

excess moisture, temperature extremes, conductive contaminants, dust or direct

sunlight.

• Keep indoor ambient temperature between 32°F and 122°F (0°C and 50°C).

• The PDU must be installed by a qualified technician only.

• Do not attempt to mount the PDU to an insecure or unstable surface.

• Install in accordance with National Electrical Code standards. Be sure to use the

proper overcurrent protection for the installation, in accordance with the plug/

equipment rating.

• Connect the PDU to an outlet that is in accordance with your local building codes

and that is adequately protected against excess currents, short circuits and earth

faults.

• The electrical outlets supplying power to the equipment should be installed near the

equipment and easily accessible.

• Do not connect the PDU to an ungrounded outlet or to extension cords or adapters

that eliminate the connection to ground.

• Be sure to provide a local disconnect device on any models that are permanently

installed without a plug that is easily accessible.

• Never attempt to install electrical equipment during a thunderstorm.

• Individual equipment connected to the PDU should not draw more current than the

individual PDU’s outlet’s rating.

• The total load connected to the PDU must not exceed the maximum load rating for

the PDU.

• Do not attempt to modify the PDU, input plugs or power cables.

• Do not drill into or attempt to open any part of the PDU housing. There are no user-

serviceable parts inside.

• Do not attempt to use the PDU if any part of it becomes damaged.

• Use of this equipment in life support applications where failure of this equipment

can reasonably be expected to cause the failure of the life support equipment or to

significantly affect its safety or effectiveness is not recommended.

17-02-373-9336CA.indb 2 6/2/2017 2:08:37 PM

1-1

1-2

1-3

Installation

Mounting the PDU

The PDU supports three primary mounting configurations: 0U Rack (Vertical), Wall and

Under-Counter.

Note: Regardless of configuration, the user must determine the fitness of hardware and procedures before

mounting. The PDU and included hardware are designed for common rack and rack enclosure types and may

not be appropriate for all applications. Exact mounting configurations may vary. Screws for attaching the

mounting brackets are included. Use only the screws supplied by the manufacturer or their exact equivalent

(#6-32, 3/16" flat head).

1-1 0U Rack Mounting: Use 2 screws

A to attach each of the 2

mounting brackets B to the PDU.

Mount the PDU vertically by

inserting 2 or more user-supplied

screws C through the mounting

brackets B and into mounting

points in the rack or rack

enclosure.

1-2 Wall Mounting: Use 2 screws A

to attach each of the 2 mounting

brackets B to the PDU. Mount

the PDU to the wall by inserting 2

or more user-supplied screws C

through the mounting brackets B

and into secure mounting points.

1-3 Under-Counter Mounting: Use 2

screws A to attach each of the 2

mounting brackets B to the PDU.

Mount the PDU under the counter

by inserting 2 or more user-

supplied screws C through the

mounting brackets B and into

secure mounting points.

17-02-373-9336CA.indb 3 6/2/2017 2:08:38 PM

Specyfikacje produktu

Marka:	Tripp Lite
Kategoria:	Listwa zasilająca
Model:	PDU15NETLX

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Tripp Lite PDU15NETLX, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Listwa zasilająca Tripp Lite

Tripp Lite Metered PDUMH20-6 Instrukcja

21 Września 2024

Tripp Lite PDUV20-60 Instrukcja

14 Września 2024

Tripp Lite PDUH32HV Instrukcja

13 Września 2024

Tripp Lite PDU3EVS6L2130 Instrukcja

11 Września 2024

Tripp Lite PDU3XMV6G32 Instrukcja

10 Września 2024

Tripp Lite PDUMH32HVATNET Instrukcja

9 Września 2024

Tripp Lite PS480806 Instrukcja

9 Września 2024

Tripp Lite PDU3XEVSR6G63A Instrukcja

28 Sierpnia 2024

Tripp Lite PDU3XVSR6G30B Instrukcja

22 Sierpnia 2024

Tripp Lite PS-415-HG-OEM Instrukcja

20 Sierpnia 2024

Instrukcje Listwa zasilająca

Najnowsze instrukcje dla Listwa zasilająca

Bauhn AP5W-0624 Instrukcja

15 Października 2024

Bauhn AP6W-0324 Instrukcja

15 Października 2024

Hama PowerCube 00223195 Instrukcja

9 Października 2024

CyberPower P0420SUD0-DE Instrukcja

9 Października 2024

CyberPower B0520SC0-DE Instrukcja

9 Października 2024

GoGen SP16A5 Instrukcja

7 Października 2024

Geist RCMW248-103PH6TL21-OD Instrukcja

3 Października 2024

Middle Atlantic RLNK-1015V Instrukcja

2 Października 2024

Middle Atlantic PD-DC-45 Instrukcja

2 Października 2024

Bachmann Desk 2 Instrukcja

1 Października 2024