Instrukcja obsługi Tripp Lite Isobar PDUMH20-ISO

Tripp Lite Listwa zasilająca Isobar PDUMH20-ISO

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tripp Lite Isobar PDUMH20-ISO (20 stron) w kategorii Listwa zasilająca. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/20
1
Metered Rack PDU with
® Surge Protection
PDUMH15-ISO
(Series Number: AGIB7403)
PDUMH20-ISO
(Series Number: AGIB7410)
Important Safety Instructions 2
Important Warnings 2
Installation 3
Features 4
Warranty & Product Registration 6
Español 7
Français 13
Owner’s Manual
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2020 Tripp Lite. All rights reserved.
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR
surge protector in our monthly drawing!
tripplite.com/warranty
2
Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed
during the installation, operation and storage of this product. Failure to
heed these instructions and warnings will void the product warranty.
Important Warnings
• The PDU provides surge and line noise protection to connected equipment through its outlets.
• The PDU is designed for indoor use only, in a controlled environment, away from excess
moisture, temperature extremes, conductive contaminants, dust or direct sunlight.
• The PDU must be installed by a qualified technician only.
• Do not attempt to mount the PDU to an insecure or unstable surface.
• Install in accordance with National Electrical Code standards. Be sure to use the proper
overcurrent protection for the installation, in accordance with the plug/equipment rating.
• Connect the PDU to an outlet that is in accordance with your local building codes and that is
adequately protected against excess currents, short circuits and earth faults.
• The electrical outlets supplying power to the equipment should be installed near the equipment
and easily accessible.
• Do not connect the PDU to an ungrounded outlet or to extension cords or adapters that
eliminate the connection to ground.
• Be sure to provide a local disconnect device on any models that are permanently installed
without a plug that is easily accessible.
• Never attempt to install electrical equipment during a thunderstorm.
• Individual equipment connected to the PDU should not draw more current than the individual
PDU’s outlet’s rating.
• The total load connected to the PDU must not exceed the maximum load rating for the PDU.
• Do not attempt to modify the PDU, input plugs or power cables.
• Do not drill into or attempt to open any part of the PDU housing. There are no user-serviceable
parts inside.
• Do not attempt to use the PDU if any part of it becomes damaged.
• Use of this equipment in life support applications where failure of this equipment can
reasonably be expected to cause the failure of the life support equipment or to significantly
affect its safety or effectiveness is not recommended. Do not use this equipment in the
presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.
3
Installation
Note: The illustrations may differ somewhat from your PDU model.
1-1
1-3
1-2
1-4
A
B
1 Determine Installation Configuration.
The PDU supports four primary installation
configurations: 1U Rack, 0U Rack, Wall
and Under-Counter. Choose a
configuration and follow the installation
instructions in the appropriate section of
Step 1 before proceeding to Step 2.
Note: Regardless of installation
configuration, the user must determine
the fitness of hardware and procedures
before mounting. The PDU and included
hardware are designed for common rack
and rack enclosure types and may not be
appropriate for all applications. Exact
mounting configurations may vary.
1-1 1U Rack Installation. Attach the PDU to
the rack by inserting four user-supplied
screws ( ) through the PDU mounting A
brackets ( ) and into the mounting holes B
of the rack rail as shown.
1-2 Remove 0U Rack Installation. Part 1:
the screws ( ) attaching the mounting C
brackets to the PDU, change the
orientation of the brackets as shown and
reattach the brackets. Use only the screws
supplied by the manufacturer or their
exact equivalent (#6-32, 1/4” flat head).
Part 2: Attach the PDU vertically by
inserting two or more user-supplied screws
(A) through the PDU mounting brackets
(B) and into mounting points in the rack
or rack enclosure.
1-3 After repeating Part 1 Wall Installation.
above, attach the PDU to a stable
mounting surface by inserting two or more
user-supplied screws ( ) through the PDU A
mounting brackets ( ) and into secure B
mounting points on the mounting surface.
1-4 Under-Counter Installation. After
repeating Part 1 above, attach the PDU to
a stable mounting surface by inserting four
user-supplied screws ( ) through the PDU A
mounting brackets ( ) and into secure B
mounting points on the mounting surface.
C
C
A
A
B
B
C
A
B

Specyfikacje produktu

Marka: Tripp Lite
Kategoria: Listwa zasilająca
Model: Isobar PDUMH20-ISO

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Tripp Lite Isobar PDUMH20-ISO, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Listwa zasilająca Tripp Lite

Tripp Lite

Tripp Lite Metered PDUMH20-6 Instrukcja

21 Września 2024
Tripp Lite

Tripp Lite PDUV20-60 Instrukcja

14 Września 2024
Tripp Lite

Tripp Lite PDUH32HV Instrukcja

13 Września 2024
Tripp Lite

Tripp Lite PDU3EVS6L2130 Instrukcja

11 Września 2024
Tripp Lite

Tripp Lite PDU3XMV6G32 Instrukcja

10 Września 2024
Tripp Lite

Tripp Lite PDUMH32HVATNET Instrukcja

9 Września 2024
Tripp Lite

Tripp Lite PS480806 Instrukcja

9 Września 2024
Tripp Lite

Tripp Lite PDU3V20D354A Instrukcja

9 Września 2024
Tripp Lite

Tripp Lite NSU-G24C2P08 Instrukcja

8 Września 2024
Tripp Lite

Tripp Lite PDU3VN6H50B Instrukcja

7 Września 2024

Instrukcje Listwa zasilająca

Najnowsze instrukcje dla Listwa zasilająca

Furman

Furman Merit M-8DX Instrukcja

14 Stycznia 2025
Brennenstuhl

Brennenstuhl 9+2m H07RN-F3G1,5 Instrukcja

12 Stycznia 2025
Sven

Sven SF-08E-16 Instrukcja

31 Grudnia 2025
Brennenstuhl

Brennenstuhl Estilo Instrukcja

29 Grudnia 2024
Huslog

Huslog EMX-190224 Instrukcja

24 Grudnia 2024
Vivanco

Vivanco EPLS 6ALU Instrukcja

7 Grudnia 2024
Vivanco

Vivanco EPLS 4USB_ALU Instrukcja

7 Grudnia 2024
Vivanco

Vivanco EPLS 4ALU Instrukcja

7 Grudnia 2024
Vivanco

Vivanco EPLS 3_1ALU2M Instrukcja

7 Grudnia 2024
Vivanco

Vivanco EBLS 3W2USB Instrukcja

7 Grudnia 2024