Instrukcja obsługi Trek Fuel EX 9.9 X01 AXS Gen 5

Trek rower Fuel EX 9.9 X01 AXS Gen 5

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Trek Fuel EX 9.9 X01 AXS Gen 5 (11 stron) w kategorii rower. Ta instrukcja była pomocna dla 26 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/11
2020 & 2021 FUEL EX
SERVICE MANUAL SUPPLEMENT
2020 & 2021 Fuel EX Table of Contents
1. Knock Block headset 1
2. Bottom bracket 1
3. Down tube storage (carbon frames only) 2
4. Rear derailleur hanger 2
5. Frame guards 3
6. Cable routing 4
7. Suspension hardware replacement parts 6
8. Dropout hardware 8
9. Specications 8
NOTE This manual has the unique design
features and components for the 2020 & 2021
Fuel EX bicycle.
1
1
Knock Block headset
Description Part number
Knock Block 58-degree complete
headset 5252156
Knock Block 58-degree upper
assembly 5252157
CHIP BOLT
UPPER BEARING
COVER
UPPER BEARING
CROWN RACE
COMPRESSION
RING
HEAD TUBE
KNOCK BLOCK
CHIP
LOWER BEARING
1. Apply grease to the upper and lower head tube
bearing-bores.
2. Apply grease to the inside bearing seats for
the compression ring and the crown race.
3. Install the crown race, then the lower bearing
on the steerer tube.
4. Insert the steerer tube into the bottom of the
head tube.
5. Install the upper bearing and the compression
ring onto the steerer tube.
6. Insert the Knock Block chip into the frame. Do
not tighten.
7. Install the upper bearing cover.
8. Install spacers as necessary.
9. Insert the Knock Block chip bolt and tighten
to 2Nm.
The 2020 and 2021 Fuel EX models use the BB92
press-t standard bottom bracket.
Use your bottom bracket manufacturer’s manual for
removal and installation instructions.
ILLUSTRATION: SRAM
Bottom bracket
2

Specyfikacje produktu

Marka: Trek
Kategoria: rower
Model: Fuel EX 9.9 X01 AXS Gen 5

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Trek Fuel EX 9.9 X01 AXS Gen 5, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą