Instrukcja obsługi Trek 1997 sensor

Trek komputer rowerowy 1997 sensor

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Trek 1997 sensor (6 stron) w kategorii komputer rowerowy. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
Sensor
Cycling
Computer
Owners Manual
COMPUTER WARRANTY
Your Trek Sensor Computer is guaranteed for 2
years against defects in workmanship or materi-
als. If you experience problems refer to the sug-
gestions in the troubleshooting guide in this man-
ual. If this does not solve your problem, please
return the computer to your authorized Trek
Dealer or send the computer postage paid to:
Trek Bicycle Corporation
Attn. Computer Warranty Dept.
801 W Madison Street
Waterloo, WI 53594 USA
TREK UK
Attn. Computer Warranty Dept.
15 Old Bridge Way
Bedfordshire, SG17 5HQ ENGLAND
Please include the following:
1. The complete computer (wiring, etc.)
2. A copy of your sales receipt
3. A brief explanation of the problem
4. Your return address
For 2 years from the date of purchase, a replace-
ment computer of the same model will be sent to
you postage paid by
Trek Bicycle Corporation.
Sensor 1.0 97 6/12/00 11:17 AM Page 2
2
3
TREK OWNERS MAUAL
Congratulations and thank you for
purchasing the Trek Sensor Bicycling
Computer! The New Trek Sensor repre-
sents the latest in bicycle computer tech-
nology, concepts with features that can
greatly enhance the riding experience of any
cyclist, whether they are a recreational
rider or a top notch racer. The Trek Sensor
may actually change the way you ride your
bicycle!
Please read this instruction manual
carefully and save this manual for
future reference.
Precautions
Remember to watch the road while
riding. Watching your bicycle computer
makes it difficult to see upcoming
obstacles. Awareness of potential road,
trial, or traffic problems should be your
main concern.
Speedometer Display (SPD)
Current riding speed is indicated on the top
line of the display with the SPD icon.
Instantaneous speed has a display range of
2.5 – 99.5 M/h (4 – 99.5 Km/h).
Automatic Timer Stopwatch
(ATM)
The Automatic Timer Stopwatch is
displayed on the lower line with the ATM
icon. The ATM stopwatch is automatically
activated by wheel movement. It cannot be
manually turned on or off, and records only
the time spend actually riding. To clear
stored information and get ready for your
next ride, enter SPD/ATM display mode
and press both keys for over 2 seconds. This
will clear all resetable functions (ATM,
DST,
AVS & MXS).
Speed Comparison Display
When riding, a +or –icon will appear
to the right of the current Speed display.
A +icon indicates that your current speed
is faster than your recorded
average speed. A –icon means you are
traveling slower than your recorded average
speed.
PARTS LIST
SENSOR LCD SCREEN
AVG
Average Speed (AVS)
Average Speed is displayed in 0.1 mi/Km
increments on the upper line, indicated by
the AVS icon. AVS is calculated with the
Auto Timer Stopwatch and is the average
speed only for time spent
actually riding.
Odometer (ODO)
The cumulative distance traveled for all
rides is displayed on the lower line,
indicated by the ODO icon. Total Odometer
can be cleared to 0 by pressing the All Clear
button on the bottom of the computer or by
removing and re-installing the battery.
Trip Distance (DST)
Trip Distance is displayed on the lower line,
indicated by the DST icon. Trip
distance is tied to the ATM stopwatch, and
records automatically when riding. Trip
Distance records up to 999.9 miles (or
Kilometers), with a resolution of 0.1
miles/kilometers.
COMPUTER FUNCTIONS
WARNING
Never place fingers near the spokes of a rotating wheel or
other moving parts which could cause injury.
Watch where you are going when riding your bicycle. Inattention
may cause a loss of control resulting in personal injury.
Sensor 1.0 97 6/12/00 11:17 AM Page 4
The Trek Sensor Computer attaches to
the mounting bracket by sliding the unit
onto the bracket from the back until it
snaps firmly into position. To remove the
computer from the bracket, place your
thumb against the back of the mounting
bracket and pull the computer toward you
with your index finger.
45
Maximum Speed (MXS)
The Maximum Speed reached during a ride is
displayed in 0.1 mi/Km increments on the
top line, with the MXS icon. Maximum
Speed is stored in
memory and is updated each time a new,
higher speed is reached.
CLOCK (CLK)
The 12 hour clock is displayed on the lower
line, indicated by the CLK icon.
ATM “Lap Timer” Display
A unique ATM “Lap Timer” display allows
you to lock the display at the end of a ride
segment and view the ATM, DST, AVS
and MXS at a later time.
This is especially useful at the end of a race,
allowing you time to cool down without
adding time to your Stopwatch.
As you cross the finish line, press the left
key for over 1 second to freeze information
on the display. You may continue to ride,
viewing the information locked on the flash-
ing locked display. The computer will con-
tinue to record information and store it in
memory. Press the left key to update the
current display information.
RESETTING THE COMPUTER
In SPD/ATM mode, press both keys for over
two seconds to clear ATM, DST, AVS and
MXS display.
SLEEP MODE
To conserve battery power, the computer
will enter the ‘Sleep’ mode after 5 minutes
of no speed input, blanking the display.
Press any key to enter normal operating
modes.
(Note: Unit will not enter sleep mode in
setting function mode.)
1. Position the sensor unit to the inside of
either the right of left fork blade
anywhere from 3-6 inches up from the fork
blade tip. Attach the sensor to the fork
blade with the quick ties but do not tighten
the ties completely until final adjustment is
complete.
INSTALLATION
Sensor and Wheel Magnet
2. Attach the wheel magnet to a spoke,
aligning the magnet with the sensor so it
faces and intersects the bottom polished
line on the sensor. The magnet should have
1-2 mm clearance from the sensor. If the
sensor and magnet are too close or touch-
ing, rotate the sensor unit toward the back
of the fork blade until adequate clearance is
achieved. Carefully tighten the quick ties
making sure you maintain the proper space
between the magnet and the sensor. Trim
the excess quick tie strap using a scissors
or fingernail clipper. Tighten the magnet
screw, but be careful not to over tighten as
this can damage the fitting.
Sensor Wiring and Bracket
1. Route the sensor wire up the back of the
fork blade or wind the wire around the
blade, making sure that the wire is not
loose and that you leave enough wire to
reach the handlebar. Secure the wire to the
fork blade immediately above the sensor
and at the top of the fork blade, using the
adhesive strips
that are provided or electrical tape.
2. Wind the wire upward around the front
brake cable until the wire is adjacent to the
handlebar, allowing enough slack for free
movement of the steering assembly cables.
3. Attach the bracket to the handlebar on
either side of the stem. The bracket goes
onto the handlebar with the wire toward the
rider side of the bar. Use the appropriate
rubber shim between the bracket and han-
dlebar to provide a secure fit.
Shims will
prevent slipping
Attaching the Computer to
the Bracket
Sensor 1.0 97 6/12/00 11:17 AM Page 6

Specyfikacje produktu

Marka: Trek
Kategoria: komputer rowerowy
Model: 1997 sensor

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Trek 1997 sensor, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje komputer rowerowy Trek

Trek

Trek Sensor - Axiom 94-98 Instrukcja

27 Września 2024
Trek

Trek Wireless 2000 Instrukcja

27 Września 2024
Trek

Trek Cyber - 2003 Instrukcja

27 Września 2024
Trek

Trek Sensor Instrukcja

27 Września 2024
Trek

Trek Basic-Alpha 94-99 Instrukcja

27 Września 2024
Trek

Trek Sensor - 2000 - no buttons Instrukcja

27 Września 2024
Trek

Trek Time - Simple Watch Instrukcja

27 Września 2024
Trek

Trek 1997 sensor Instrukcja

27 Września 2024
Trek

Trek Fusion Instrukcja

27 Września 2024
Trek

Trek Radar - 1999 Instrukcja

27 Września 2024

Instrukcje komputer rowerowy

Najnowsze instrukcje dla komputer rowerowy

BBB

BBB BCP-35W Instrukcja

12 Października 2024
Wahoo

Wahoo Elemnt Roam v2 Instrukcja

9 Października 2024
VDO

VDO R4 Instrukcja

7 Października 2024
VDO

VDO R5 Instrukcja

7 Października 2024
Sigma

Sigma Eox View 1700 Instrukcja

7 Października 2024
IGPSport

IGPSport BSC100 Instrukcja

7 Października 2024
IGPSport

IGPSport iGS800 Instrukcja

7 Października 2024
Lezyne

Lezyne Super Instrukcja

5 Października 2024
Crivit

Crivit HG01734A Instrukcja

4 Października 2024
Cateye

Cateye Quick CC-RS100W Instrukcja

3 Października 2024