Instrukcja obsługi TP-Link VIGI NVR1104H-4P

TP-Link magnetowid VIGI NVR1104H-4P

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TP-Link VIGI NVR1104H-4P (75 stron) w kategorii magnetowid. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/75
Installation Guide
Network Video Recorder
CONTENTS
English ������������������������
Deutsch �����������������������
Español �����������������������
ληνικά �����������������������
Français ����������������������
Italiano ������������������������
Português ����������������������
Nederlands ����������������������
Bahasa Indonesia �������������������
日本語 ������������������������
한국어 ������������������������
繁體中文 �����������������������
ไทย ��������������������������
TiếngไViệtไ ����������������������
Türkçe ������������������������
ةيبرعلا ������������������������
English
1
Note: images may dier from the actual products.
Hard Drive Installation
For first time installation, please prepare a 3.5-inch hard disk drive (HDD). It is
recommended to use the HDD of enterprise or surveillance level. Before installation,
please disconnect the power from the network video recorder (NVR).
For steel shell products
1�
Remove the xing screws on the side
and back panels to open the cover of
the NVR.
2� Attach the 4 included HDD screws
to your hard drive. Do not fasten.
Hard Disk Drive (HDD)
3� Match the 4 screws on the HDD with
the 4 holes on the NVR, and insert the
HDD interface into the slot.
4�
Flip the NVR upside down and
fasten the HDD screws. Replace the
cover and fasten the screws of the
NVR.


Specyfikacje produktu

Marka: TP-Link
Kategoria: magnetowid
Model: VIGI NVR1104H-4P

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z TP-Link VIGI NVR1104H-4P, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje magnetowid TP-Link

Instrukcje magnetowid

Najnowsze instrukcje dla magnetowid