Instrukcja obsługi TP-Link MC230L

TP-Link Konwerter audio/wideo MC230L

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TP-Link MC230L (3 stron) w kategorii Konwerter audio/wideo. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/3

Gigabit SFP to SFP Fiber Converter

LED Explanation

On: Power on

O:

Power o

PWR

On: Transmitting or receiving data

O: No link

Scenario: Conversion between Dierent Fiber Types

Single-Mode Optical Fiber (SMF)

Converter

Link

Package Contents: Converter, Power Adapter, Installation Guide

Multi-Mode Optical Fiber (MMF)

Long Distance Transmission Short-to-Medium Distance Transmission

Take the conversion from SMF to MMF as an example.

*The conversion of ber types is based on the type of connecting optical module.

EU declaration of conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU,

2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.

Safety Information

Keep the device away from water, re, humidity or hot environments.

Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.

Do not use damaged charger or USB cable to charge the device.

Do not use any other chargers than those recommended.

Adapter shall be installed near the equipment and shall be easily accessible.

Do not point or stare directly into the beam or into the optical port of the transceiver when it is operating, as this can injure your eyesight

Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don't

hesitate to contact us.

The plug on the power supply cord is used as the disconnect device, the socket-outlet shall be easily accessible.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due

to improper use of the device. Please use this product with care and operate at your own risk.

Specications

Environmental and Physical Specifications

0 C to 50 F to 122˚ ˚C (32˚ ˚F)

-40˚C to 70˚C (-40˚F to 158˚F)

5% to 90% RH non-condensing

10% to 90% RH non-condensing

Operating Temperature

Storage Temperature

Storage Humidity

Operating Humidity

For technical support and other information, please visit

https://www.tp-link.com/support, or simply scan the QR code.

If you have any suggestions or needs on the product guides, welcome

to email techwriter@tp-link.com.cn.

To ask questions, find answers, and communicate with TP-Link users or

engineers, please visit https://community.tp-link.com to join TP-Link

Community.

General Specifications

IEEE 802.3z

Standards

2 SFP

Connector

PWR, Link

LED

External Power Adapter: 5 V/0.6 A

Power

Dimensions 94.5x73x27 mm

Product Name: I.T.E. POWER SUPPLY

Model Number: T050060-2B1

Responsible party:

TP-Link USA Corporation, d/b/a TP-Link North America, Inc.

Address: 145 South State College Blvd. Suite 400, Brea, CA 92821

Website: https://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6803

E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the

applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the

equipment is properly maintained and operated.

Issue Date: 2020.12.02

FCC compliance information statement

この装置は、クラスA情報技術装置です。この装置を家庭環境で使用すると電波妨害を引き起こすことがあります。こ

の場合には使用者が適切な対策を講ずるよう要求されることがあります。

VCCI-A

Explanation of the symbols on the product label

DC voltage

Indoor use only

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment

(WEEE). This means that this product must be handled pursuant to European directive

2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.

User has the choice to give his product to a competent recycling organization or to the retailer

when he buys a new electrical or electronic equipment.

Polarity of output terminals

Energy eciency marking (level VI)

Class II equipment

This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user

may be required to take adequate measures.

CE Mark Warning

限用物質含有情況標示聲明書

產品元件名稱

PCB

外殼

電源供應器

其他及其配件

限用物質及其化學符號

備考1.〝超出0.1 wt %〞及〝超出0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值

Note 1：“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the

restricted substance exceeds the reference percentage value of presence condition.

備考2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。

Note 2：“○” indicates that the percentage content of the restricted substance does not exceed the

percentage of reference value of presence.

備考3.〝－〞係指該項限用物質為排除項目。

Note 3：The “－” indicates that the restricted substance corresponds to the exemption.

○ ○ ○ ○ ○

鉛

○

鎘

○

汞

○

六價鉻

Cr+6

○

多溴聯苯

PBB

○

多

溴二苯醚

PBDE

○

○ ○○○○

Caution

Operator’s manual

Specyfikacje produktu

Marka:	TP-Link
Kategoria:	Konwerter audio/wideo
Model:	MC230L

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z TP-Link MC230L, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Konwerter audio/wideo TP-Link

TP-Link MC230L Instrukcja

8 Października 2024

Instrukcje Konwerter audio/wideo

Najnowsze instrukcje dla Konwerter audio/wideo

Abus TVAC20001 Instrukcja

10 Października 2024

StarTech.com VS123HD Instrukcja

9 Października 2024

StarTech.com VS421HDDP Instrukcja

9 Października 2024

StarTech.com ST228MX Instrukcja

9 Października 2024

StarTech.com HDMI2DVI Instrukcja

9 Października 2024

StarTech.com VGANTSCPRO Instrukcja

9 Października 2024

StarTech.com CPNT2VGAA Instrukcja

9 Października 2024

StarTech.com DVI2VGA Instrukcja

9 Października 2024

StarTech.com VS222HDQ Instrukcja

9 Października 2024

StarTech.com VS122HDMIU Instrukcja

9 Października 2024