Instrukcja obsługi TP-Link Archer MR550

TP-Link router Archer MR550

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TP-Link Archer MR550 (4 stron) w kategorii router. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
Quick Installation Guide
Wireless 4G LTE Router
1. Connect the Hardware
Images may dier from actual products.
©2022 TP-Link 7106509950 REV1.1.0
Check the following LEDs’ status. If the Internet LED is on, your router is connected
to the internet successfully.
3. Enjoy the Internet2. Verify the Hardware Connection
Note: If the Internet LED does not turn on, please refer to Q2 of Need Help in this guide.
Power
On On
Internet
On
Wi-Fi
For better internet connection, make sure of the Signal Strength LED 2 or 3 bars
are lit. Otherwise, try relocating the router to a spot that may receive a stronger mobile
network signal, such as near a window.
Wireless
Wired
Connect your computers to the router's LAN ports via Ethernet cables.
Find the SSIDs (network names) and wireless password printed on the label at the
bottom of the router.
a.
Click the network icon of your computer or go to Wi-Fi settings of your smart device,
and then select the SSID to join the network.
b.
Wireless Password/PIN:XXXX XXXXX
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
c. Connect the
power adapter
and turn on the
router.
b. With the gold contacts
facing down, insert the
nano SIM card into the
slot until you hear a
click.
Power adapter a. Install the antennas
and position them
upwards.
Customize the 4G LTE Router Congure the router via Tether App
Note: The router can also be used (or configured) in Wireless Router Mode for DSL/Cable
connections. For more advanced configurations, please refer to the user guide on TP-Link
official website at www.tp-link.com.
Note: If the login page does not appear, please refer to Q1 of Need Help in this guide.
2 .Launch a web browser and type in http://tplinkmodem.net http://192.168.1.1. or
Create a new password for future logins.
3. Follow the step-by-step instructions of the to complete the initial Quick Setup
conguration.
1. Make sure your computer is connected to the router (wired or wireless).
Need Help?
Q1. What should I do if I cannot access the web management page?
If the computer is set to a static IP address, change its settings to obtain an IP address automatically.
Make sure http://tplinkmodem.net http://192.168.1.1 or is correctly entered in the web browser.
Use another web browser and try again.
Reboot your router and try again.
Disable and enable the active network adapter in use.
Q2. What should I do if I cannot access the internet?
Verify that your SIM card is an LTE or WCDMA card.
Verify that your SIM card is in your internet service provider’s service area.
Verify that your SIM card has sufficient credit.
Check the LAN connection: Open a web browser and enter http://tplinkmodem.net or
http://192.168.1.1 in the address bar. If the login page does not appear, refer to Q1 and then try again.
Launch a web browser, log in to the web management page, and check the following:
1) Go to Advanced Network Internet > > to verify the parameters provided by your ISP are correctly
entered. If the parameters are incorrect, click Create Profile and enter the correct parameters, then
select the new profile from the Profile Name list.
2) Go to Advanced Network PIN Management > > to verify if PIN is required. If it is, enter the correct PIN
provided by your ISP, and click Save.
3) Go to Advanced Network Data Settings > > to verify if the Total/Monthly Used exceeds the
Total/Monthly Allowance Correct Total/Monthly Used. If it does, click and set to 0 (zero), or disable
Data Limit.
4) Go to Advanced Network Internet > > to verify that is enabled. If it is not, enable it to Mobile Data
access the internet.
5) Confirm with your ISP if you are in a roaming service area. If you are, go to Advanced Network > >
Internet to enable . Data Roaming
Q3. How do I restore the router to its factory default settings?
With the router powered on, press and hold the button on the rear panel of the router until WPS/RESET
the Power LED starts flashing, then release the button. Wait while the router resets.
Log in to the web management page of the router, and go to Advanced System Tools Backup & > >
Restore Factory Restore, click and wait until the reset process is complete.
Q4. What should I do if I forget my web management page password
• If you are using a TP-Link ID to log in, click Forgot password on the login page and then follow the
instructions to reset it.
• Alternatively, refer to to reset the router, then create a new password to log in. Q3
Q5. What should I do if I forget my wireless network password?
The default wireless password is printed on the product label of the router.
Connect a computer directly to the router using an Ethernet cable. Log in to the router's web
management page and go to Basic Wireless > to retrieve or reset your wireless password.
The TP-Link Tether app provides a simple, intuitive way to access and manage your router.
View information about clients
connected to your router
Block unwelcome users from
connecting to your network
Set up Parental Controls
with access time
Change the basic wireless
network settings
Note: If you don’t have an account, create one rst.
1. Download the TP-Link Tether app.
2. Open the Tether app and log in with your TP-Link ID.
3. Tap the icon in the Tether app and select 3G/4G Router.
Follow the steps to complete the setup and connect to the internet.
or
How to begin?
For technical support, replacement services, user guides, and other information, please visit
https://www.tp-link.com/support, or simply scan the QR code.
To communicate with TP-Link users or engineers, please join the TP-Link Community at
https://community.tp-link.com.
Safety Information
Keep the device away from water, re, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need
service, please contact us.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Do not use the device where wireless devices are not allowed.
Adapter shall be installed near the equipment and shall be
easily accessible.
http://tplinkmodem.net
HighMiddleLow
Let’s Get Started
Conrm Password
New Password

Specyfikacje produktu

Marka: TP-Link
Kategoria: router
Model: Archer MR550

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z TP-Link Archer MR550, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje router TP-Link

Instrukcje router

Najnowsze instrukcje dla router