Instrukcja obsługi Toyota 52-8FDF30
Toyota
Podnośnik widłowy
52-8FDF30
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Toyota 52-8FDF30 (70 stron) w kategorii Podnośnik widłowy. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/70
Introduction Quick Start Setup Connections Basic
Operation
Useful
Features Appendix
OPERATION MANUAL
DATA PROJECTOR
MODEL
PG-F255W
ii
IMPORTANT
• For your assistance in reporting the loss
or theft of your Projector, please record
the Model and Serial Number located on
the bottom of the projector and retain this
information.
• Before recycling the packaging, please
ensure that you have checked the con-
tents of the carton thoroughly against the
list of “Supplied accessories” on page 11.
Model No.:
Serial No.:
iii
SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporat-
ing a 10A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362
fuse marked or and of the same rating as above, which is also indicated on the pin
face of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse
cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug
supplied, cut off the mains plug and fit an appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immedi-
ately and disposed of in a safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket
outlet, as a serious electric shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:
WARNING:
THIS APPARATUS MUST BE EARTHED.
IMPORTANT:
The wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow : Earth
Blue : Neutral
Brown : Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the
coloured markings identifying the terminals in your plug proceed as follows:
•The wire which is coloured green-and-yellow must be connected to the terminal in the
plug which is marked by the letter E or by the safety earth symbol or coloured green or
green-and-yellow.
•The wire which is coloured blue must be connected to the terminal which is marked with
the letter N or coloured black.
•The wire which is coloured brown must be connected to the terminal which is marked with
the letter L or coloured red.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
Specyfikacje produktu
| Marka: | Toyota |
| Kategoria: | Podnośnik widłowy |
| Model: | 52-8FDF30 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Toyota 52-8FDF30, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Podnośnik widłowy Toyota
19 Sierpnia 2024
Instrukcje Podnośnik widłowy
- Podnośnik widłowy Scheppach
- Podnośnik widłowy Yale
- Podnośnik widłowy Jungheinrich
- Podnośnik widłowy AUSA
Najnowsze instrukcje dla Podnośnik widłowy
5 Października 2024
28 Września 2024
28 Września 2024
27 Września 2024
16 Września 2024
14 Września 2024