Instrukcja obsługi Totolink N600R

Totolink router N600R

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Totolink N600R (1 stron) w kategorii router. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/1

Network

Cable

Network

Telephone

Cable

ADSL Modem

Router

Wall Socket

admin

Click . Select TOTOLINK N600R, no password

required by default.

When connected, the Web page of TOTOLINK

N600R will pop up automatically.

Try any website to test the Internet. Here we type in www.totolink.net.

Now the router’s Status interface turns up, it shows connected type

and IP address & DNS you get.

Hardware Installation

1. Please disconnect the power adapter and all cables during

thunderstorm weather;

2. Keep away from heat source and keep well ventilated;

3. Please pay attention to the waterproofing and moisture-proof

when storing, transporting and running.

4. The power adapter must be original or approved by TOTOLINK.

5. Put the router in flat places.

Set Up PC

Windows 10Windows Vi a/7st For Windows 10 Operating System, please comply with following steps to set up.

If you use ADSL Modem to access the Internet, please follow below steps. For houses that there is only one

Ethernet cable from the wall, please plug the Ethernet cable to the router’s WAN port directly.

Click ( )--- ---

--- ---

--- , right-click

, and choose .

Double-click

Choose

and ,

click ; And then click .

For Windows Vista or Windows 7 Operating System, please comply with following steps to set up.

Click

right-click ,

and choose .

Double-click

Choose

and ,

click ; And then click .

Quick Installation Guide

600Mbps Wireless N Router

NOTE:

Set Up Router

Please set up the router following below steps.

Run any Web browser.

For more information, please go to www.totolink.net

The page will pop up automatically. Enter for both

User Name and Password, click . (The auto pop-up page only for

first connection, future Login please enter “ ” in address bar)

Now you can see the interface.

Choose the and enter the parameters

provided by your .

Wireless Settings, you can change or retain your SSID (wireless network name).

Choose the encryption type. The is recommended, then type

in your password ( password length more than 8 characters).Then click

to save the Settings.

Here we take PPPoE as example. You are required to enter the User

Name and Password.

Information in this document is subject to change without prior notice.

8Wait for a while, Internet connected successfully! Please click .

LED Indicators

WAN

LAN

Blink

Off

The router is working under normal power.

Status

Red

Green The Turbo switch is enabled and the router is working

under middle power.

The router is working normally or resetting.

Power is off.

The WAN port is connected, the Internet is available.

Off The WAN port is not connected, the Internet is unavailable.

On There is device connected to LAN port 1/2/3/4.

Off No device connected to LAN port 1/2/3/4.

Ports and Buttons Description

WAN

LAN

Turbo

RST/WPS

Connect with the power adapter

DC IN

Connect to ADSL modem or Internet Cable

Connect to PC or Laptop

Press for 1s, WPS enabled; press for more than 5s, Reset

function enabled.

Improve the router’s working power, extend Wi-Fi coverage.

Suitable for: N600R

Copyrigh OLINK All righ r erved. Website: http:/ w.toto k.netts TOT ts es /ww lin

V2.1710

WPS: press for about 1~3 seconds, the system LED indicator keep solid

light, it means WPS working;

RST: press for about 5~8 seconds, all LEDs blinks quickly, the device will

restore to factory default settings.

N :OTE

After you set the Key, please remember your SSID and the Key to connect with

your wireless LAN.

Auto Pop-up Setting page for First Wi-Fi Devices Connection

FAQ

What can I do if I forget the router’s Web Login page User

Name and Password?

How to reset the router to default settings?

1. Please make sure your router’s power is on regularly, then press the

RST/WPS button for about 5~8s.

2. Loosen the button until your router’s LED lights all flashing, then you

have reset your router to default settings.

Please reset your router to default settings firstly, the default IP address is

192.168.0.1 admin, both default User Name and Password are .

How Turbo switch improve the router’s wireless

performance?

By default, the Turbo switch is on. If you slide the Turbo switch to off, the

router's output power will decrease by about 6dBm theoretically, which

means your Wi-Fi signal will be weakened as well as the Wi-Fi range.

So we recommend you turn it off to reduce radiation only if there is any

pregnant women or infants at home.

→

N600R

Note: This function is only suitable for iPhone and a few Android smart phones. If the auto pop-up page not turns up on your phone, please use PC to set up your router.