Instrukcja obsługi Totolink A850R

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Totolink A850R (1 stron) w kategorii router. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
Hardware Installation If you access Internet by ADSL, please comply with step 1, 2, 3 and 4 in below diagram in correct order; if you access Internet by
residential broadband, please comply with step 2, 3 and 4 to connect the WAN port of your router with the residential broadband directly.
1. Please disconnect the power adapter and all cables during
thunderstorm weather;
2. Keep away from heat source and keep well ventilated;
3. Please pay attention to the waterproofing and moisture-proof
when storing, transporting and running.
4. The power supply must reach the rated current and power.
5. Put the router in flat places.
Set Up PC
For Windows 2000 or Windows XP Operating System, please comply with following steps to set up.
Right-click “My Network
Places”, click “Properties”
Right-click “Local Area
Connection”, click “Properties”
Double-click “Internet Protocol
(TCP/IP)”
Choose “Obtain an IP address
automatically” and “Obtain DNS
server address automatically”,
click “OK”; go back to previous
interface and click “OK”
For Windows Vista or Windows 7 Operating System, please comply with following steps to set up.
Click “Start— Control Panel— Network
and Internet— Network Connection”,
right-click “Local Area Connection”,
and choose “Properties”.
Double-click “Internet Protocol
Version 4 (TCP/IPv4)”
Choose “Obtain an IP address automatically”
and “Obtain DNS server address automatically”,
click “OK”; go back to previous interface and
click “OK”
Quick Installation Guide
Wireless-N Broadband Router
NOTE:
Set Up Router
Please set up the router following below steps.
Run the Web browser.
Input the User Name and Password, then click Login button
(The default Username and Password is admin).
Now you have logged in the Easy Setup interface.
Wireless Network Connection
Right-click “My Network
Places”, click “Properties”
Right-click “Wireless Network
Connection”, and click “View
Available Wireless Networks
Confirm the wireless network SSID name,
choose one that you would like to connect,
then click “Connect”
Input the encrytion key and click “Connect”
Have connected wireless network, you can access
Internet through wireless mode.
For more information, please go to www.totolink.net
Type http://192.168.1.1 in the web browser, then press Enter.
You can change WAN Access Type directly.
You can change wireless state, wireless SSID and encryption conveniently
as well.
Here we take the encryption of WPA2 Mixed for example to setup the router.
(1)Choose Static IP
(2)Choose DHCP Client
(3)Choose PPPoE
Input the IP Address Subnet Mask and DNS as your ISP provides.
Input the User Name and Password as your ISP provides.
This part allows you to configure the WAN port parameters so that your
computer can access Internet.
Static IP: If your ISP has provided the fixed IP that allows you to access
Internet, please choose this option.
DHCP Client: Dynamic Host Configuration Protocol (DHCP) is a local area
network protocol. If you choose this mode, you will get a dynamic IP address
from your ISP automatically.
PPPoE: Point-to-Point Protocol over Ethernet (PPPoE) is a virtual private
and secure connection between two systems that enables encapsulated data
transport. Select PPPoE option if ISP provides a PPPoE connection.
You can setup the 2.4G Wireless Setting referring to 5G Wireless Setting.
7
If you have finished your settings, please click Apply Changes to save them.
Otherwise, you can reset the router to default settings just by clicking Reset.
8
FAQ
Forget the password?
5
How to reset the router to default settings?
1. Please make sure your routers power is on regularly, then press the
RST-WPS button for about 10s.
2. Loosen the button until your routers LED lights all flashing, then you
have reset your router to default settings.
Please reset your router to default settings firstly, and set a new password.
The default Username and Password is admin.
The default IP is 192.168.1.1.
Suitable for: A850R
LED Indicators
CPU
2.4G
1/2/3/4LAN
WAN
5G
This indicator lights blue when the router powered on, otherwise it is off.POWER
When the router powered on, this indicator keeps lighting blue.
This indicator lights blue when the 2.4G wireless connection enabled.
This indicator lights blue when the 5G wireless connection enabled.
When the WAN port is connected successfully the indicator lights blue.
While transmitting or receiving data through the WAN port the indicator
blinks blue.
When the LAN port has a successful connection, the indicator lights blue.
While transmitting or receiving data through the LAN port the indicator
blinks blue.
Ports Description
ON/OFF
1/2/3/4 LAN
WPS/RST
WAN
This socket is used to connect the power adapter.
DC IN
This slide switch is used to power on or off the wireless router.
This port is used to connect the router to local PC.
This port is used to connect the router to the Internet.
There is a RST-WPS button on the rear panel. Press the utton for more
than 5 seconds, the router will restore factory settings. If press the
button less than 5 seconds, the router will establish Wi-Fi protected
settings automatically.
Router
Telephone
Wire
Telephone Wire
Telephone
Wire
Network
Cable
Network
Cable
Information in this document is subject to change without prior notice.
V.14.08

Specyfikacje produktu

Marka: Totolink
Kategoria: router
Model: A850R

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Totolink A850R, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje router Totolink

Instrukcje router

Najnowsze instrukcje dla router