Instrukcja obsługi Total TCKLI2006

Total Maszyna do śrub TCKLI2006

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Total TCKLI2006 (30 stron) w kategorii Maszyna do śrub. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/30
DRILL AND IMPACT DRILL KIT
2
Security instructions
Caution
Read all safety warnings and all instructions. Failure to follow all warnings and
instructions can result in electric shock, fire, and / or serious injury.
The term “power tool” in the warnings refers to your mains operated (corded) power tool -
or battery-operated (cordless) power tool.
Note: Save all warnings and instructions for future reference.
1) Work area safety
a. Keep the work area clean and well lit to avoid accidents.
b. Do not use power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust that can cause fires.
c. Keep children and other unauthorized persons away while using a power
tool. Distractions can cause you to lose control of the tool.
2) Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way.
Using a proper plug reduces the risk of electric shock.
b. Avoid body contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerators. There is an increased risk of electric shock if
your body is grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
d. Never use the cord to carry, pull, or unplug the power tool. Keep the cord
away from heat or oil.
e. When using a power tool outdoors, use an extension cord suitable for
outdoor use.
f. If it is unavoidable to use the tool in a humid location, use a residual
current device (RCD) protected supply to reduce the risk of electric shock.
3) Personal security
a. Always be alert, watch what you are doing, and use common sense when
operating the tool.
b. Do not use a power tool if you are tired or under the influence of drugs or
other substances.
c. Use personal protective equipment. Always wear eye protection.
Protective equipment such as a dust mask, non slip safety shoes, hard-
hat, or hearing protection used in the right conditions will reduce personal
injury. Also, do not wear loose clothing or jewelry.
d. Avoid accidentally turning the tool on. Make sure the switch is in the off
position before connecting it to the power supply and moving it.
e. Remove any adjusting key or wrench before turning on the power tool. A
wrench or wrench attached to a rotating part of the power tool can cause
serious injury.
f. If dust extraction and collection devices are used, make sure they are
properly connected. Use these devices properly and you will reduce dust
hazards.
Drill
3
4) Use and care of the cordless tool
a. acturer.Recharge the battery only with the charger specified by the manuf
An unsuitable charger can create a fire hazard.
b. Use power tools only with specifically designated batteries. The use of
other batteries may create a risk of injury or fire.
c. When batteries are not in use, keep it away from other metal objects, such
as paper clips, coins, keys, nails, screws, or other small metal objects,
that can make a connection from one terminal to another. Shorting the
battery terminals together can cause burns or fire.
d. Abusive conditions can cause liquid to eject from the battery; avoid
contact. If accidentally contacted, rinse immediately with water. If the
liquid comes into contact with the eyes, also seek medical help. Liquid
expelled from the battery can cause irritation or burns.
e. Do not use a battery or tool that is damaged or modified. They may exhibit
unpredictable behavior resulting in fire, explosion, or risk of injury.
f. Do not expose a battery or tool to fire or excessive temperature. Exposure
to fire or a temperature above 130 ° C may cause an explosion.
g. Follow all loading instructions. Do not charge the battery or the tool
outside the temperature range specified in the instructions. Improper
charging or at temperatures outside the specified range can damage the
battery or increase the risk of fire.
5) Service
a. Have your power tool repaired by a qualified person and use replacement
parts recommended by the manufacturer. This will ensure that the safety
of the power tool is maintained.

Specyfikacje produktu

Marka: Total
Kategoria: Maszyna do śrub
Model: TCKLI2006

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Total TCKLI2006, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna do śrub Total

Total

Total TAT40342 Instrukcja

17 Grudnia 2024
Total

Total TAT40122 Instrukcja

17 Grudnia 2024
Total

Total TCKLI2006 Instrukcja

17 Grudnia 2024

Instrukcje Maszyna do śrub

Najnowsze instrukcje dla Maszyna do śrub

Güde

Güde MS 4.0-150-17 4in1 Akku-Schrauber inkl. Koffer + Akku 1.5Ah + Zub Instrukcja

17 Grudnia 2024
Fein

Fein ASCD 12-150 W4 Select Instrukcja

15 Grudnia 2024
Fein

Fein ASCD 12-100 W4 Select Instrukcja

15 Grudnia 2024
Fein

Fein ASCD 18-1000 W34 Select Instrukcja

15 Grudnia 2024
Fein

Fein ASCD 18-300 W2 Select Instrukcja

15 Grudnia 2024
Hilti

Hilti SID 2‑A12 Instrukcja

10 Grudnia 2024
Black Decker

Black Decker 2038 Instrukcja

8 Grudnia 2024
Hilti

Hilti HRD-H Instrukcja

7 Grudnia 2024
Bavaria

Bavaria BSD 3,6/1 Li Instrukcja

6 Grudnia 2024
Silverline

Silverline 248250 Instrukcja

6 Grudnia 2024