Instrukcja obsΕ‚ugi Tot Mate TM8352R

Tot Mate Zlew TM8352R

Przeczytaj poniΕΌej πŸ“– instrukcjΔ™ obsΕ‚ugi w jΔ™zyku polskim dla Tot Mate TM8352R (5 stron) w kategorii Zlew. Ta instrukcja byΕ‚a pomocna dla 5 osΓ³b i zostaΕ‚a oceniona przez 2 uΕΌytkownikΓ³w na Ε›rednio 4.5 gwiazdek

Pobierz PDF
Strona 1/5
1
#0964-3146
3594.TM8350/TM8352.9/25/18
Β©2018 Stevens Industries, Inc.
Due to continuing product development, Stevens reserves the right to change specifications without notice.
CAUTION – CHOKING HAZARD
Adult assembly required due to presence
of small parts and sharp edges.
ATTENTION
Please unpack and assemble in an area away from children's activities. Remove all tools
and excess materials from work area after assembly of unit is complete. Dispose of pallet
and packaging materials in an environmentally friendly manner. If any parts are missing
or damaged, please call Stevens for immediate parts replacement (1-800-350-3270).
When ordering parts, give the Model Number and Color of the unit.
NOTE: ASSEMBLY INSTRUCTIONS REFERENCE
ILLUSTRATIONS AND PART NUMBERS FOR THE TM8352R.
by Stevens Industries, Inc.
704 West Main St.
Teutopolis, IL 62467
P: 800.350.3270
P: 217-857-7100 β€’ F: 217-857-7101
www.totmate.com
TM8350R
TM8352R
IMPORTANT!
Assembly must be securely attached to
building structure with anchoring devices
of appropriate type, size and quantity in
accordance with applicable codes and
accepted installation practices.
TM8350R
Single Floor Vanity
TM8352R
Double Floor Vanity
3DUWVξ˜ƒ/LVW
3$57ξ˜ƒξ˜†47<,7(0
ξ˜—ξ˜”;;ξ˜ξ˜”ξ˜˜ξ˜“ξ˜”ξ˜•ξ˜”
ξ˜›ξ˜•;;ξ˜ξ˜“ξ˜•ξ˜˜ξ˜•ξ˜”ξ˜•
ξ˜™ξ˜”;;ξ˜ξ˜“ξ˜™ξ˜—ξ˜“ξ˜—ξ˜–
ξ˜“ξ˜›ξ˜™ξ˜”ξ˜ξ˜“ξ˜–ξ˜–ξ˜›ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜—ξ˜—
ξ˜“ξ˜›ξ˜™ξ˜”ξ˜ξ˜“ξ˜“ξ˜–ξ˜•ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜—ξ˜˜
ξ˜“ξ˜›ξ˜™ξ˜”ξ˜ξ˜“ξ˜•ξ˜“ξ˜–ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜›ξ˜™
ξ˜“ξ˜™ξ˜™ξ˜”ξ˜ξ˜”ξ˜•ξ˜˜ξ˜œξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜”ξ˜š
ξ˜“ξ˜™ξ˜™ξ˜“ξ˜ξ˜•ξ˜šξ˜“ξ˜›ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜”ξ˜›
ξ˜“ξ˜™ξ˜™ξ˜”ξ˜ξ˜“ξ˜“ξ˜“ξ˜›ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜”ξ˜œ
'(6&5,37,21
(QGξ˜ƒ8
$FFHVVξ˜ƒ3DQHO
5DLO7.6XSW
1XWξ˜ƒ3URSHOOξ˜ƒξ˜”ξ˜’ξ˜—ξ˜ƒξ˜•ξ˜“[ξ˜‘ξ˜˜ξ˜ƒξ˜˜ξ˜’ξ˜›)ODQJ
6FUHZξ˜ƒ0DFKξ˜ƒ3K7Uξ˜ƒ=Qξ˜ƒξ˜”ξ˜’ξ˜—ξ˜ξ˜•ξ˜“[ξ˜”ξ˜‘ξ˜˜ξ˜“
6FUHZξ˜ƒ&RQQξ˜ƒ+['Fξ˜ƒ1Lξ˜ƒξ˜ƒξ˜ƒξ˜šPP[ξ˜ƒξ˜˜ξ˜“PP
)DXFξ˜ƒ3((5ξ˜ƒ3ξ˜•ξ˜—ξ˜”/)ξ˜ƒ/DYξ˜ƒξ˜—ξ˜…
6LQNξ˜ƒ6QJξ˜ƒ&'(ξ˜–ξ˜”ξ˜•ξ˜•63:ξ˜ƒξ˜•ξ˜”[ξ˜–ξ˜”ξ˜ƒ:KW
3OE
J
ξ˜ƒ6WUDLQHUξ˜ƒ)ODWξ˜ƒ'ξ˜šξ˜“ξ˜ξ˜”ξ˜“ξ˜“
3DUWVξ˜ƒ/LVW
3$57ξ˜ƒξ˜†47<,7(0
ξ˜—ξ˜”;;ξ˜ξ˜”ξ˜˜ξ˜“ξ˜”ξ˜•ξ˜”
ξ˜›ξ˜•;;ξ˜ξ˜“ξ˜•ξ˜˜ξ˜–ξ˜”ξ˜•
ξ˜™ξ˜”;;ξ˜ξ˜“ξ˜™ξ˜—ξ˜”ξ˜—ξ˜–
ξ˜™ξ˜”;;ξ˜ξ˜“ξ˜™ξ˜—ξ˜œξ˜•ξ˜—
ξ˜“ξ˜›ξ˜™ξ˜”ξ˜ξ˜“ξ˜–ξ˜–ξ˜›ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜—ξ˜˜
ξ˜“ξ˜›ξ˜™ξ˜”ξ˜ξ˜“ξ˜“ξ˜–ξ˜•ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜—ξ˜™
ξ˜“ξ˜™ξ˜™ξ˜“ξ˜ξ˜•ξ˜šξ˜“ξ˜œξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜”ξ˜š
ξ˜“ξ˜™ξ˜™ξ˜”ξ˜ξ˜”ξ˜•ξ˜˜ξ˜œξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜•ξ˜›
ξ˜“ξ˜™ξ˜™ξ˜”ξ˜ξ˜“ξ˜“ξ˜“ξ˜›ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜•ξ˜œ
ξ˜“ξ˜›ξ˜™ξ˜”ξ˜ξ˜“ξ˜•ξ˜“ξ˜–ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜›ξ˜”ξ˜“
ξ˜“ξ˜›ξ˜™ξ˜”ξ˜ξ˜“ξ˜•ξ˜“ξ˜˜ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜—ξ˜”ξ˜”
'(6&5,37,21
(QGξ˜ƒ8
$FFHVVξ˜ƒ3DQHO
5DLO7.6XSW
5DLO;VXSW
1XWξ˜ƒ3URSHOOξ˜ƒξ˜”ξ˜’ξ˜—ξ˜ƒξ˜•ξ˜“[ξ˜‘ξ˜˜ξ˜ƒξ˜˜ξ˜’ξ˜›)ODQJ
6FUHZξ˜ƒ0DFKξ˜ƒ3K7Uξ˜ƒ=Qξ˜ƒξ˜”ξ˜’ξ˜—ξ˜ξ˜•ξ˜“[ξ˜”ξ˜‘ξ˜˜ξ˜“
6LQNξ˜ƒ'EOξ˜ƒ''(ξ˜—ξ˜œξ˜•ξ˜•63:ξ˜ƒξ˜•ξ˜”[ξ˜—ξ˜œξ˜ƒ:KW
)DXFξ˜ƒ3((5ξ˜ƒ3ξ˜•ξ˜—ξ˜”/)ξ˜ƒ/DYξ˜ƒξ˜—ξ˜…
3OEJξ˜ƒ6WUDLQHUξ˜ƒ)ODWξ˜ƒ'ξ˜šξ˜“ξ˜ξ˜”ξ˜“ξ˜“
6FUHZξ˜ƒ&RQQξ˜ƒ+['Fξ˜ƒ1Lξ˜ƒξ˜ƒξ˜ƒξ˜šPP[ξ˜ƒξ˜˜ξ˜“PP
6FUHZξ˜ƒ&RQQξ˜ƒ+[)Oξ˜ƒ=1ξ˜ƒξ˜ƒξ˜ƒξ˜šPP[ξ˜ƒξ˜˜ξ˜“PP
TM8350R – TM8352R
STEP-BY-STEP ASSEMBLY
2#0964-3146
Β©2018 Stevens Industries, Inc.
Due to continuing product development, Stevens reserves the right to change specifications without notice. 3594.TM8350/TM8352.9/25/18
ILLUSTRATIONS AND PART NUMBERS ARE FOR TM8352R.
BASIC ASSEMBLY INSTRUCTIONS ARE THE SAME FOR BOTH MODELS.
2-PERSON ASSEMBLY RECOMMENDED.
IMPORTANT!
Be sure to keep all parts supported during assembly to avoid damage.
Do not over-tighten screws or it will damage the pre-drilled holes;
snug fit is adequate.
3DUWVξ˜ƒ/LVW
TM8352R
3$57ξ˜ƒξ˜†47<,7(0
ξ˜—ξ˜”;;ξ˜ξ˜”ξ˜˜ξ˜“ξ˜”ξ˜•ξ˜”
ξ˜›ξ˜•;;ξ˜ξ˜“ξ˜•ξ˜˜ξ˜–ξ˜”ξ˜•
ξ˜™ξ˜”;;ξ˜ξ˜“ξ˜™ξ˜—ξ˜”ξ˜—ξ˜–
ξ˜™ξ˜”;;ξ˜ξ˜“ξ˜™ξ˜—ξ˜œξ˜•ξ˜—
ξ˜“ξ˜›ξ˜™ξ˜”ξ˜ξ˜“ξ˜–ξ˜–ξ˜›ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜—ξ˜˜
ξ˜“ξ˜›ξ˜™ξ˜”ξ˜ξ˜“ξ˜“ξ˜–ξ˜•ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜—ξ˜™
ξ˜“ξ˜™ξ˜™ξ˜“ξ˜ξ˜•ξ˜šξ˜“ξ˜œξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜”ξ˜š
ξ˜“ξ˜™ξ˜™ξ˜”ξ˜ξ˜”ξ˜•ξ˜˜ξ˜œξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜•ξ˜›
ξ˜“ξ˜™ξ˜™ξ˜”ξ˜ξ˜“ξ˜“ξ˜“ξ˜›ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜•ξ˜œ
ξ˜“ξ˜›ξ˜™ξ˜”ξ˜ξ˜“ξ˜•ξ˜“ξ˜–ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜›ξ˜”ξ˜“
ξ˜“ξ˜›ξ˜™ξ˜”ξ˜ξ˜“ξ˜•ξ˜“ξ˜˜ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜—ξ˜”ξ˜”
'(6&5,37,21
(QGξ˜ƒ8
$FFHVVξ˜ƒ3DQHO
5DLO7.6XSW
5DLO;VXSW
1XWξ˜ƒ3URSHOOξ˜ƒξ˜”ξ˜’ξ˜—ξ˜ƒξ˜•ξ˜“[ξ˜‘ξ˜˜ξ˜ƒξ˜˜ξ˜’ξ˜›)ODQJ
6FUHZξ˜ƒ0DFKξ˜ƒ3K7Uξ˜ƒ=Qξ˜ƒξ˜”ξ˜’ξ˜—ξ˜ξ˜•ξ˜“[ξ˜”ξ˜‘ξ˜˜ξ˜“
6LQNξ˜ƒ'EOξ˜ƒ''(ξ˜—ξ˜œξ˜•ξ˜•63:ξ˜ƒξ˜•ξ˜”[ξ˜—ξ˜œξ˜ƒ:KW
)DXFξ˜ƒ3((5ξ˜ƒ3ξ˜•ξ˜—ξ˜”/)ξ˜ƒ/DYξ˜ƒξ˜—ξ˜…
3OEJξ˜ƒ6WUDLQHUξ˜ƒ)ODWξ˜ƒ'ξ˜šξ˜“ξ˜ξ˜”ξ˜“ξ˜“
6FUHZξ˜ƒ&RQQξ˜ƒ+['Fξ˜ƒ1Lξ˜ƒξ˜ƒξ˜ƒξ˜šPP[ξ˜ƒξ˜˜ξ˜“PP
6FUHZξ˜ƒ&RQQξ˜ƒ+[)Oξ˜ƒ=1ξ˜ƒξ˜ƒξ˜ƒξ˜šPP[ξ˜ƒξ˜˜ξ˜“PP
HARDWARE / TOOLS INCLUDED
Hex Wrench
Access Panel Nut (5)
(Nut Propell 1/4 20x.5 5/8Flang)
Access Panel Screw (6)
(Screw Mach PhTr Zn 1/4-20x1.50)
Confirmat Bolt (10)
(Screw Conn HxDc Ni 7mmx50mm)
Flat Head Confirmat Bolt (11)
(Screw Conn HxFl ZN 7mmx50mm)
(Phillips screwdriver and soft mallet required but not included.)
TM8350R – TM8352R
STEP-BY-STEP ASSEMBLY
3
#0964-3146
Β©2018 Stevens Industries, Inc.
Due to continuing product development, Stevens reserves the right to change specifications without notice.3594.TM8350/TM8352.9/25/18
Construct two as follows:Rail Supports
a. Insert dowels on ends of one into X Rail (4)
holes in center of two . Make sure TK Rails (3)
holes in ends of align with thru-holes X Rail (4)
in . Press firmly into place. TK Rails (3)
b. Secure Rails (3 & 4) from together with (a.)
two , using the Flat Head Confirmat Bolts (11)
included .Hex Wrench
c. Repeat and to construct other (a.) (b.) Rail
Support.
STEP
1
FOR TM8352R ONLY (STEP 1):
thru-hole
Lay one flat on floor, with side having the End (1)
most holes facing up. NOTE: Holes are closer to
back edge and further from front edge.
STEP
2
FOR BOTH MODELS (STEPS 2-13):
back edge
front edge
Insert dowels on into holes on TK Rails (3) End
(1). (For TM8352R, TK Rails (3) are part of the
Rail Supports Step 1 from .) Top edges of all TK
Rails (3) must be facing same direction. Press
firmly into place.
STEP
3
top edges of
TK Rails (3)
(to identify, note
location of holes
on faces)
Position other on top of assembly, so End (1)
dowels on align with holes on TK Rails (3) End (1)
and back edges of both are facing same Ends (1)
direction. Press firmly into place.
STEP
4
back edge
back edge

Specyfikacje produktu

Marka: Tot Mate
Kategoria: Zlew
Model: TM8352R

Potrzebujesz pomocy?

JeΕ›li potrzebujesz pomocy z Tot Mate TM8352R, zadaj pytanie poniΕΌej, a inni uΕΌytkownicy Ci odpowiedzΔ…


Instrukcje Zlew Tot Mate

Tot Mate

Tot Mate TM8362R Instrukcja

26 WrzeΕ›nia 2024
Tot Mate

Tot Mate TM8350R Instrukcja

26 WrzeΕ›nia 2024
Tot Mate

Tot Mate TM8352R Instrukcja

26 WrzeΕ›nia 2024
Tot Mate

Tot Mate TM8360R Instrukcja

26 WrzeΕ›nia 2024

Instrukcje Zlew

Najnowsze instrukcje dla Zlew

BLANCO

BLANCO STATURA K 480-U/W70 Instrukcja

14 PaΕΊdziernika 2024
Teka

Teka TFLIN4040 Instrukcja

13 PaΕΊdziernika 2024
Teka

Teka TFLIN5040 Instrukcja

13 PaΕΊdziernika 2024
Teka

Teka TFLIN2C740 Instrukcja

13 PaΕΊdziernika 2024
Teka

Teka TFLIN7140 Instrukcja

13 PaΕΊdziernika 2024
Smeg

Smeg LYP861FR2 Instrukcja

4 PaΕΊdziernika 2024
Smeg

Smeg LYP102FR2 Instrukcja

4 PaΕΊdziernika 2024
Smeg

Smeg LZ791A2 Instrukcja

4 PaΕΊdziernika 2024
Smeg

Smeg LZ792AV2 Instrukcja

4 PaΕΊdziernika 2024
Teka

Teka DM 33.22 2B 9 Instrukcja

4 PaΕΊdziernika 2024