Instrukcja obsługi Toro 38078
Toro
lustrzanka
38078
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Toro 38078 (24 stron) w kategorii lustrzanka. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/24
Operator’s Manual
Pour
obtenir gratuitement une version en français de ce manuel, écrivez à l’adresse
ci-dessous. N’oubliez pas d’indiquer les numéros de modèle et de série de votre produit.
The T
oro Company
, Attn: Parts Dept., 81
1
1 L
yndale A
ve S, Bloomington, MN 55420–1
196
Domestic English (EN)
Form No. 3322-813
824
Snowthrower
Model No. 38078—200000001 and Up
2
The T
oro Company
– 1999
All Rights Reserved
Printed in the USA
Contents
Page
Introduction 2.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety 3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Snowthrower Safety
3
. . . . . . . . . . . . . . . . .
T
oro Snowthrower Safety
4
. . . . . . . . . . . . . . . . . . .
Safety Decals and Instructions
6
. . . . . . . . . . . . . . . .
Assembly 6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Loose Parts
6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the Handle
7
. . . . . . . . . . . . . . . . . . . . . . .
Installing the Speed Selector Rod
8
. . . . . . . . . . . . .
Installing the T
raction Rod
8
. . . . . . . . . . . . . . . . . . .
Installing the Auger/Impeller Drive Control
Linkage 9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the Chute Control Rod
9
. . . . . . . . . . . . . .
Securing the Chute Deector
10
. . . . . . . . . . . . . . . . .
Checking the T
ire Pressure
10
. . . . . . . . . . . . . . . . . .
Before Starting
10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Filling the Engine with Oil
10
. . . . . . . . . . . . . . . . . . .
Filling the Fuel T
ank with Gasoline
11
. . . . . . . . . . . .
Operation 12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Controls 12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting and Stopping the Engine
13
. . . . . . . . . . . . . .
Freewheeling or Self-propelled Drive
14
. . . . . . . . . .
Snowthrowing T
ips 15
. . . . . . . . . . . . . . . . . . . . . . . .
Maintenance 16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recommended Maintenance Schedule
16
. . . . . . . . .
Checking the Engine Oil Level
17
. . . . . . . . . . . . . . .
Changing the Engine Oil
17
. . . . . . . . . . . . . . . . . . . .
Checking/Adding Auger Gear Box Grease
17
. . . . . .
Adjusting the T
raction Drive
18
. . . . . . . . . . . . . . . . .
Replacing the T
raction Drive Belt
18
. . . . . . . . . . . . .
Adjusting the Auger/Impeller Drive Belt
19
. . . . . . . .
Replacing the Auger/Impeller Drive Belt
19
. . . . . . .
Adjusting the Scraper and Skids
21
. . . . . . . . . . . . . .
Adjusting the Speed Selector
21
. . . . . . . . . . . . . . . . .
Lubricating the Snowthrower
22
. . . . . . . . . . . . . . . . .
Replacing the Spark Plug
22
. . . . . . . . . . . . . . . . . . . .
Emptying the Fuel T
ank 22
. . . . . . . . . . . . . . . . . . . . .
Storage 23
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparing the Fuel System
23
. . . . . . . . . . . . . . . . . . .
Preparing the Engine
23
. . . . . . . . . . . . . . . . . . . . . . .
Preparing the Snowthrower
23
. . . . . . . . . . . . . . . . . .
Accessories 23
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty
Back Cover
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WARNING
The engine exhaust fr
om this pr
oduct contains
chemicals known to the State of California to
cause cancer
, birth defects, or other r
eproductive
harm.
Introduction
Thank you for choosing a T
oro product. W
e want you to
be completely satised with your new purchase.
Read this manual carefully to learn how to operate and
maintain your product properly. The information in this
manual can help you and others avoid injury and product
damage. Although T
oro designs and produces safe
products, you are responsible for operating the product
properly and safely
.
Whenever you contact your Authorized Service Dealer or
the factory for help with service, genuine T
oro parts, or
additional information, have the model number and the
serial number of your product handy
. Y
ou will nd the
model number and serial number decal on the product as
illustrated in Figure 1.
m-4038
Figure
1
1. Model
number and serial number decal
Write
the product model number and serial number in the
space below:
Model
No.
Serial No.
This
manual identies potential hazards and has special
safety messages that help you and others avoid personal
injury and even death. DANGER, W
ARNING, and
CAUTION are words used to identify the level of hazard.
DANGER
signals an extreme hazard that will cause
serious injury or death if you do not follow the
recommended precautions.
3
WARNING
signals a hazard that may cause serious injury
or death if you do not follow the recommended
precautions.
CAUTION
signals a hazard that may cause minor or
moderate injury if you do not follow the recommended
precautions.
This manual uses two other words to highlight
information.
Important
calls attention to special
mechanical information and
Note
emphasizes general
information worthy of special attention.
Safety
T
o ensur
e maximum safety
, best performance, and to
gain knowledge of the pr
oduct, it is essential that you
and any other operator of the snowthr
ower r
ead and
understand the contents of this manual befor
e the
motor is ever started. Pay particular attention to the
safety alert symbol
which means CAUTION,
W
ARNING, OR DANGER — “personal safety
instruction.” Read and understand the instruction
because it has to do with safety
. Failur
e to comply with
instruction may r
esult in personal injury
.
The snowthrower is designed and tested to of
fer
reasonably safe service; however
,
failur
e to comply with
the following instructions may r
esult in personal
injury.
General
Snowthrower Safety
The
following instructions have been adapted from the
ANSI/OPEI standard B71.3—1995 and ISO standard
8437:1989. Information or terminology specic to T
oro
snowthrowers is enclosed in parenthesis.
Training
•
Read the operator
’
s manual carefully
. Be thoroughly
familiar with the controls and the proper use of the
equipment. Know how to stop the unit and disengage
the controls quickly
.
•
Never allow children to operate the equipment. Never
allow adults to operate the equipment without proper
instruction.
•
Keep the area of operation clear of all persons,
particularly small children and pets.
•
Exercise caution to avoid slipping or falling, especially
when operating in reverse.
Preparation
•
Thoroughly inspect the area where the equipment is to
be used and remove all doormats, sleds, boards, wires,
and other foreign objects.
•
Disengage all clutches and shift into neutral before
starting the engine.
•
Do not operate the equipment without wearing
adequate winter garments. W
ear footwear which will
improve footing on slippery surfaces.
•
Handle fuel with care; it is highly ammable.
•
Use an approved fuel container
.
•
Never add fuel to a running or hot engine.
•
Fill fuel tank outdoors with extreme care. Never
ll fuel tank indoors.
•
Replace gasoline caps securely and wipe up spilled
fuel.
•
Use only the power cord supplied with the
snowthrower and a receptacle appropriate for use with
the cord for electric starting motors.
•
Adjust the collector (auger) housing height to clear
gravel or crushed rock surface. (This is not necessary
on single-stage snowthrowers).
•
Never attempt to make any adjustments while the
engine is running, except where specically
recommended by manufacturer (T
oro).
•
Let engine and machine adjust to outdoor temperatures
before starting to clear snow
.
•
The operation of any powered machine can result in
foreign objects being thrown into the eyes. Always
wear safety glasses or eye shields during operation or
while performing an adjustment or repair
.
Operation
•
Do not put hands or feet near or under rotating parts.
Keep clear of the dischar
ge opening at all times.
•
Exercise extreme caution when operating on or
crossing gravel drives, walks, or roads. Stay alert for
hidden hazards or traf
c.
•
After striking a foreign object, stop the engine, remove
the wire from the spark plug, thoroughly inspect the
snowthrower for any damage, and repair the damage
before restarting and operating the snowthrower
.
•
If the unit should start to vibrate abnormally
, stop the
engine and check immediately for the cause. V
ibration
is generally a warning of trouble.
•
Stop the engine whenever you leave the operating
position, before unclogging the collector
(auger)/impeller housing or dischar
ge guide (chute),
and when making any repairs, adjustments, or
inspections.
•
When cleaning, repairing, or inspecting, make certain
the collector/impeller (auger/impeller or rotor blades)
and all moving parts have stopped. Disconnect the
Specyfikacje produktu
| Marka: | Toro |
| Kategoria: | lustrzanka |
| Model: | 38078 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Toro 38078, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje lustrzanka Toro
24 Sierpnia 2024
24 Sierpnia 2024
Instrukcje lustrzanka
- lustrzanka Samsung
- lustrzanka Voltcraft
- lustrzanka Liebherr
- lustrzanka SYM
- lustrzanka Chauvet
- lustrzanka Chauvin Arnoux
- lustrzanka Uni-T
- lustrzanka Gossen Metrawatt
- lustrzanka Rigol
- lustrzanka Sky Rider
- lustrzanka Roccat
- lustrzanka Tamron
- lustrzanka Wiha
- lustrzanka Interstuhl
- lustrzanka Kern
- lustrzanka Generac
- lustrzanka Lucide
- lustrzanka Buzz Rack
- lustrzanka ICE Watch
- lustrzanka AdHoc
- lustrzanka Berker
- lustrzanka BODITEK
- lustrzanka Peltor
- lustrzanka Beemoo
- lustrzanka Middle Atlantic
- lustrzanka Esab
- lustrzanka Arthur Berndt
Najnowsze instrukcje dla lustrzanka
25 Grudnia 2024
23 Grudnia 2024
23 Grudnia 2024
16 Grudnia 2024
16 Grudnia 2024
15 Grudnia 2024
13 Grudnia 2024
13 Grudnia 2024
13 Grudnia 2024
9 Grudnia 2024