Instrukcja obsługi Tornado HI-FAN-30MOWF-WR-1P

Tornado Wentylator HI-FAN-30MOWF-WR-1P

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tornado HI-FAN-30MOWF-WR-1P (4 stron) w kategorii Wentylator. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
PLEASE READ AND SAVE THIS INSTRUCTION.
Attention: Pictures in the IM are for reference only.
30" OUTDOOR RATED WATER
RESISTANT HIGH VELOCITY METAL
OSCILLATING WALL FAN
Model: HI-FAN-30MOWF- WR-1P
 
Intended Use:
This product is intended for use only industrial or commercial .
Use only with electrical wiring that is in good working order and
that meets applicable codes and ordinances. If you have any
questions whether your wiring is adequate, consult a qualified
electrician.
This fan is suitable for outdoor use.
While using your fan, you should follow the IMPORTANT
INSTRUCTIONS listed below. As part of those instructions, we
have used the word "WARNING" to indicate the level of hazard:
WARNING indicates a hazard which, if not avoided, could result
in injury or death.
IMPOR ANT INSTRUCTIONST
As with all electrical appliances, basic safety precautions should
always be followed to reduce the risk of electric shock, fire, or
injury to persons, including the following precautions:
•Read all the instructions before using this fan.
•Use this fan only as described in this manual. Any other use not
recommended by the manufacturer may cause electrical shock,
fire or injury to persons.
Do not operate the fan with a damaged power cord or after the fan
malfunctions or has been dropped in any manner.
•Use of extreme used caution necessary is when any fan is by or
near children, disabled persons or pets and whenever the fan is
left operating unattended.
•Do small, not a place the fan on unlevel, uneven or any surface
which might allow fan to tip or fall.
•Always unplug fan when not use, in when moving from place to
place, when assembling or disassembling parts, and before
cleaning.
•The not by use of attachments, recommended or sold the
manufacturer, may cause hazards.
•To reduce the risk of fire or electrical shock, do not use this fan
with any solid state speed control device.
•Do not operate the fan with blade guards or any safety device
removed.
•Automatically operated device - To reduce the risk of injury,
disconnect from power supply before servicing.
•If the power supply cord is damaged, contact your local service
center or a qualified electrician to install an appropriate
replacement cord to prevent any injury or damage.
•Do not use an extension cord with this fan.
•To reduce the risk of injury to persons, install fan at least 2.1m
(7 feet) above the floor.
•Do not run power cord under carpeting. Do not cover cord with
throw rugs, runners or the like. Arrange cord away from traffic
area where it will not be tripped over.
•Do not insert or allow any object to enter any openings on the
fan. Doing so may cause electric shock and/or fire hazard.
Avoid contact with moving parts.
•This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities
or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
•Children should be supervised to ensure they do not play with
the appliance.
ReAd & SAve TheSe
INSTRUCTIONS
m WARNING:
Risk of electrical shock---This fan is supplied with a grounding
conductor and GFCI type plug. To reduce the risk of electrical
shock, make sure that it is connected only to a PROPERLY
grounded outlet.
Use only on GFCI protected receptacles.
To Reduce The Risk Of Electric Shock, Connect Only To An
Outlet Provided With A Ground Fault Circuit Interrupting Device.
Do not under any circumstances remove the power plug’s ground
prong or ground fault unit. For your personal safety, the fan must
be grounded.
The fan is equipped with a power supply with ground fault circuit
interrupting device. Removal or tampering of power cord will void
warranty.
Never use an extension cord to connect the fan to an outlet. All
installations must be made into a grounded outlet.
m WARNING: Electrical Shock Hazard
Do use with with not damaged cord or Use plug. adequate
electrical system that is up to code.
m CAUTION: To reduce the risk of electric shock, connect
only to an outlet
m WARNING: to Reduce the Risk of Fire or Electric
Shock, do not use this product with any solid‑state speed
control device.
DANGER: Do not submerge motor in water or allow motor to
be exposed to water. Personal injury and/or death could result.
Never handle the fan or motor with wet hands or when standing
on wet or damp surface or in water. Fatal electrical shock could
occur.
。
Fan Assembly
We are happy to help, contact us : tornadofans.info@gmail.com
1. Install the bracket on the strong wall.angle support
2. Install the fan motor on the angle support bracket.
3. Assembling the back guard, blade, font guard to the
motor.
ASSEMBLY INSTRUCTION
Use the following information as a guideline only. It is the user's
responsibility to be sure the location and the wall surface can
handle the weight of this fan .
The wall fan must be mounted on 12 inch (300mm) thick dry and
cement ‑ grouted firm wall or on 4 by 5 inch wood studs / joists.
Use wall bracket as a template for locating the holes to be drilled.
After determining the hole locations, use an appropriate sized
drill bit and, drill holes through mounting surface.
It is recommended that a minimum of grade 5 fasteners be used.
The following are acceptable surfaces for mounting wall mount
assembly.
STEEL SURFACE ‑ When mounting to a steel surface, such
as vertical I‑beam, drill through holes at pre‑marked locations,
using a 9/32" drill bit. Attach wall mount assembly to mounting
surface using 1/4"‑20 hex screw, in combination with 1/4" flat
washers, 1/4" lock washers, and 1/4"‑20 hex nuts.
MASONRY SURFACE ‑ When mounting to a masonry surface
use a 1/4" expansion type bolt or 1/4" masonry lag with
shield designed to handle the weight of this fan. Drill holes
at pre‑marked locations using appropriate sized drill bit as
recommended for the fastener.

Specyfikacje produktu

Marka: Tornado
Kategoria: Wentylator
Model: HI-FAN-30MOWF-WR-1P

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Tornado HI-FAN-30MOWF-WR-1P, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Wentylator Tornado

Tornado

Tornado HI-FAN-DRUM24-1P Instrukcja

16 Grudnia 2024
Tornado

Tornado HI-FAN-30HVF-1P Instrukcja

16 Grudnia 2024
Tornado

Tornado HI-FAN-18HVWM-1P Instrukcja

16 Grudnia 2024
Tornado

Tornado HI-FAN-30MOWF-A-1P Instrukcja

16 Września 2024
Tornado

Tornado HI-FAN-24POF-1P Instrukcja

14 Września 2024
Tornado

Tornado HI-FAN-12HVWM-WR-1P Instrukcja

13 Września 2024
Tornado

Tornado HI-FAN-DRUM24W-1P Instrukcja

13 Września 2024
Tornado

Tornado HI-FAN-18HVWM-WR-1P Instrukcja

12 Września 2024
Tornado

Tornado HI-FAN-30MOWF-WR-1P Instrukcja

11 Września 2024

Instrukcje Wentylator

Najnowsze instrukcje dla Wentylator

Windmill

Windmill FC07W3 Instrukcja

21 Grudnia 2024
Windmill

Windmill FC07W1 Instrukcja

21 Grudnia 2024
Windmill

Windmill FC07W2 Instrukcja

21 Grudnia 2024
Windmill

Windmill FC07W5 Instrukcja

21 Grudnia 2024
SVAN

SVAN SVP401600MOBA Instrukcja

21 Grudnia 2024
NewAir

NewAir NFN12AWH00 Instrukcja

20 Grudnia 2024
NewAir

NewAir AF-600 Instrukcja

20 Grudnia 2024
Livoo

Livoo DOM510 Instrukcja

20 Grudnia 2024
SVAN

SVAN SVP401600OBA Instrukcja

20 Grudnia 2024
Yamazen

Yamazen FCR-D408 Instrukcja

19 Grudnia 2024