Instrukcja obsługi Tornado HI-FAN-24MOWF-A-1P

Tornado Wentylator HI-FAN-24MOWF-A-1P

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tornado HI-FAN-24MOWF-A-1P (5 stron) w kategorii Wentylator. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/5
PLEASE READ AND SAVE THIS INSTRUCTION.
Attention: Pictures in the IM are for reference only.
24 PRO METAL OSCILLATING"
WALL FAN
Model: HI-FAN-2 A-1P4MOWF-
Intended Use:
This product is intended for use only industrial or commercial .
Use only with electrical wiring that is in good working order and
that meets applicable codes and ordinances. If you have any
questions whether your wiring is adequate, consult a qualified
electrician.
While using your fan, you should follow the IMPORTANT
INSTRUCTIONS listed below. As part of those instructions, we
have used the word "WARNING" to indicate the level of hazard:
WARNING indicates a hazard which, if not avoided, could result
in injury or death.
IMPOR ANT INSTRUCTIONST
As with all electrical appliances, basic safety precautions should
always be followed to reduce the risk of electric shock, fire, or
injury to persons, including the following precautions:
•Read all the instructions before using this fan.
•Use this fan only as described in this manual. Any other use not
recommended by the manufacturer may cause electrical shock,
fire or injury to persons.
•Do not operate the fan with a damaged power cord or after the fan
malfunctions or has been dropped in any manner.
•Use of extreme caution is necessary when any fan is used by or
near children, disabled persons or pets and whenever the fan is
left operating unattended.
•Do not place the fan on a small, unlevel, uneven or any surface
which might allow fan to tip or fall.
•Always unplug fan when not in use, when moving from place to
place, when assembling or disassembling parts, and before
cleaning.
•The use of attachments, not recommended or sold by the
manufacturer, may cause hazards.
•Do not use outdoors.
•To reduce the risk of fire or electrical shock, do not expose to
water or rain.
•To reduce the risk of fire or electrical shock, do not use this fan
with any solid state speed control device.
•Do not operate the fan with blade guards or any safety device
removed.
•Automatically operated device - To reduce the risk of injury,
disconnect from power supply before servicing.
•If the power supply cord is damaged, contact your local service
center or a qualified electrician to install an appropriate
replacement cord to prevent any injury or damage.
•To reduce the risk of injury to persons, install fan at least 2.1m
(7 feet) above the floor.
•Avoid the use of extension cords due to risk of fire. If an extension
cord must be used, the cord must be minimum
14 AWG and rated not less then 1875 watts.
•Do not run power cord under carpeting. Do not cover cord with
throw rugs, runners or the like. Arrange cord away from traffic
area where it will not be tripped over.
•Do not insert or allow any object to enter any openings on the fan.
Doing so may cause electric shock and/or fire hazard. Avoid
contact with moving parts.
•This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities or
lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
•Children should be supervised to ensure they do not play with the
appliance.
2
2
ReAd & SAve TheSe
INSTRUCTIONS
m WARNING: Shock Hazard
Use your fan only in dry environments. This fan is not intended
for use in a bathroom, laundry area, or similar locations, or near
sinks, washing machines, swimming pools or other sources of
water. Never locate fan where it may fall into a bathtub or other
water receptacle. Do not use in damp environments such as
flooded basements.
m WARNING: Hot Surfaces
Do not touch fan motor when in use. This motor is hot when in
use, to avoid burns, do not let bare skin touch hot surfaces.
m WARNING: Fire Hazard
Fans have arcing or sparking parts inside. Do not use near
combustible materials or flammable gases or sources of heat.
DO NOT USE in areas where gasoline, paint or ammable
materials are used or stored. To prevent a possible fire, do not
block air intakes or exhaust in any manner. Do not insert or allow
foreign objects to enter any ventilation or exhaust opening as this
may cause an electric shock, fire, or damage the fan.
m WARNING: Electrical Shock Hazard
Do not use with damaged cord or plug. Use with adequate
electrical system that is up to code.
m CAUTION: to Prevent Electric Shock, this product
has a three prong grounded plug that must be inserted into a
matching properly grounded outlet to reduce the risk of electrical
shock. Do not attempt to defeat this safety feature.
m WARNING: to Reduce the Risk of Fire or Electric
Shock, do not use this product with any solid‑state speed
control device.
。
Fan Assembly
We are happy to help, contact us : tornadofans.info@gmail.com
1. Install the bracket on the strong wall.angle support
2. Install the fan motor on the angle support bracket.
3. Assembling the back guard, blade, font guard to the
motor.
ASSEMBLY INSTRUCTION
Use the following information as a guideline only. It is the user's
responsibility to be sure the location and the wall surface can
handle the weight of this fan .
The wall fan must be mounted on 12 inch (300mm) thick dry and
cement ‑ grouted firm wall or on 4 by 5 inch wood studs / joists.
Use wall bracket as a template for locating the holes to be drilled.
After determining the hole locations, use an appropriate sized
drill bit and, drill holes through mounting surface.
It is recommended that a minimum of grade 5 fasteners be used.
The following are acceptable surfaces for mounting wall mount
assembly.
STEEL SURFACE ‑ When mounting to a steel surface, such
as vertical I‑beam, drill through holes at pre‑marked locations,
using a 9/32" drill bit. Attach wall mount assembly to mounting
surface using 1/4"‑20 hex screw, in combination with 1/4" flat
washers, 1/4" lock washers, and 1/4"‑20 hex nuts.
MASONRY SURFACE ‑ When mounting to a masonry surface
use a 1/4" expansion type bolt or 1/4" masonry lag with
shield designed to handle the weight of this fan. Drill holes
at pre‑marked locations using appropriate sized drill bit as
recommended for the fastener.

Specyfikacje produktu

Marka: Tornado
Kategoria: Wentylator
Model: HI-FAN-24MOWF-A-1P

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Tornado HI-FAN-24MOWF-A-1P, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Wentylator Tornado

Tornado

Tornado HI-FAN-20POF-5BA-1P Instrukcja

29 Grudnia 2024
Tornado

Tornado HI-FAN-30POF-WR-1P Instrukcja

29 Grudnia 2024
Tornado

Tornado HI-FAN-30HVOF-1P Instrukcja

29 Grudnia 2024
Tornado

Tornado HI-FAN-24MOWF-WR-1P Instrukcja

29 Grudnia 2024
Tornado

Tornado HI-FAN-20WMPRO-1P Instrukcja

29 Grudnia 2024
Tornado

Tornado HI-FAN-20HVWM-A-1P Instrukcja

29 Grudnia 2024
Tornado

Tornado HI-FAN-24MOWF-A-1P Instrukcja

29 Grudnia 2024
Tornado

Tornado HI-FAN-24PF-1P Instrukcja

29 Grudnia 2024
Tornado

Tornado HI-FAN-24HVWM-1P Instrukcja

29 Grudnia 2024
Tornado

Tornado HI-FAN-DRUM24-1P Instrukcja

16 Grudnia 2024

Instrukcje Wentylator

Najnowsze instrukcje dla Wentylator

Ausclimate

Ausclimate EcoSmart ACAC300CB Instrukcja

14 Stycznia 2025
Breville

Breville the PopFan LFA100 Instrukcja

14 Stycznia 2025
Breville

Breville the AirDynamic 3D Connect LPF308 Instrukcja

14 Stycznia 2025
Ausclimate

Ausclimate EcoSmart ACAC230CB Instrukcja

14 Stycznia 2025
Emerio

Emerio FN-108784.1 Instrukcja

13 Stycznia 2025
Emerio

Emerio FN-114204.1 Instrukcja

13 Stycznia 2025
Emerio

Emerio FN-110475 Instrukcja

13 Stycznia 2025
Emerio

Emerio FN-110139.3 Instrukcja

13 Stycznia 2025
Emerio

Emerio FN-110477.2 Instrukcja

13 Stycznia 2025
Emerio

Emerio FN-114223.3 Instrukcja

13 Stycznia 2025