Instrukcja obsługi Tornado HI-FAN-24POF-1P

Tornado Wentylator HI-FAN-24POF-1P

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tornado HI-FAN-24POF-1P (5 stron) w kategorii Wentylator. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
PLEASE READ AND SAVE THIS INSTRUCTION.
Attention: Pictures in the IM are for reference only.
24 HIGH-VELOCITY METAL"
OSCILLATING PEDESTAL FAN
: HI-FAN- 1PModel 24POF-
Intended Use:
This product is intended for use only industrial or commercial .
Use only with electrical wiring that is in good working order and
that meets applicable codes and ordinances. If you have any
questions whether your wiring is adequate, consult a qualified
electrician.
While using your fan, you should follow the IMPORTANT
INSTRUCTIONS listed below. As part of those instructions, we
have used the word "WARNING" to indicate the level of hazard:
WARNING indicates a hazard which, if not avoided, could result
in injury or death.
IMPOR ANT INSTRUCTIONST
As with all electrical appliances, basic safety precautions should
always be followed to reduce the risk of electric shock, fire, or
injury to persons, including the following precautions:
Read all the this instructions before using fan.
Use in use this as fan only described this Any manual. other not
recommended by the manufacturer may cause electrical shock,
fire or injury to persons.
Do not after operate the with a fan damaged power cord or the fan
malfunctions or has been dropped in any manner.
Use extreme caution necessary of is when any is fan used by or
near children, disabled persons or pets and whenever the fan is
left operating unattended.
Do on small, not the place fan a unlevel, uneven or any surface
which might allow fan to tip or fall.
Always when unplug fan not use, in when moving from place to
place, when assembling or disassembling parts, and before
cleaning.
The not by use of attachments, recommended or sold the
manufacturer, may cause hazards.
Do use not outdoors.
To reduce the risk of fire or electrical shock, do not expose to
water or rain.
To reduce the risk of fire or electrical shock, do not use this fan
with any solid state speed control device.
Do not with operate the fan blade guards or any safety device
removed.
Automatically operated device - To reduce the risk of injury,
disconnect from power supply before servicing.
If the power supply cord is damaged, contact your local service
center or a qualified electrician to install an appropriate
replacement cord to prevent any injury or damage.
Avoid the cords use of extension due to fire. risk of If an extension
cord must used, be the cord must be minimum
14 AWG and rated not less then 1875 watts.
Do run not power under cord carpeting. Do cord not cover with
throw rugs, runners or the like. Arrange cord away from traffic
area where it will not be tripped over.
Do insert object enter any not or any allow to openings on the fan.
Doing so may electric shock cause and/or fire hazard. Avoid contact
with moving parts.
This is use appliance not intended for by persons (including
children) with reduced physical, sensory or mental capabilities or
lack they of experience knowledge, and unless have
been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children supervised should be to ensure play they do not with the
appliance.
2
2
ReAd & SAve TheSe
INSTRUCTIONS
m WARNING: Shock Hazard
Use your fan only in dry environments. This fan is not intended
for use in a bathroom, laundry area, or similar locations, or near
sinks, washing machines, swimming pools or other sources of
water. Never locate fan where it may fall into a bathtub or other
water receptacle. Do not use in damp environments such as
flooded basements.
m WARNING: Hot Surfaces
Do not touch fan motor when in use. This motor is hot when in
use, to avoid burns, do not let bare skin touch hot surfaces.
m WARNING: Fire Hazard
Fans have arcing or sparking parts inside. Do not use near
combustible materials or flammable gases or sources of heat.
DO NOT USE in areas where gasoline, paint or ammable
materials are used or stored. To prevent a possible fire, do not
block air intakes or exhaust in any manner. Do not insert or allow
foreign objects to enter any ventilation or exhaust opening as this
may cause an electric shock, fire, or damage the fan.
m WARNING: Electrical Shock Hazard
Do not use with damaged cord or plug. Use with adequate
electrical system that is up to code.
m CAUTION: to Prevent Electric Shock, this product
has a three prong grounded plug that must be inserted into a
matching properly grounded outlet to reduce the risk of electrical
shock. Do not attempt to defeat this safety feature.
m WARNING: to Reduce the Risk of Fire or Electric
Shock, do not use this product with any solid‑state speed
control device.
Fan Assembly
We are happy to help, contact us : info@ .comtornadofans


Specyfikacje produktu

Marka: Tornado
Kategoria: Wentylator
Model: HI-FAN-24POF-1P

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Tornado HI-FAN-24POF-1P, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Wentylator Tornado

Instrukcje Wentylator

Najnowsze instrukcje dla Wentylator

Air King

Air King E130SH Instrukcja

10 Października 2024
TriStar

TriStar VE-5936 Instrukcja

10 Października 2024
Orbegozo

Orbegozo PW 1321 Instrukcja

10 Października 2024
Thermex

Thermex Silent 100 CZ Instrukcja

9 Października 2024
Imarflex

Imarflex IF-375BU Instrukcja

9 Października 2024
Imarflex

Imarflex IF-365BK Instrukcja

9 Października 2024
Kogan

Kogan KARCDCFANLA Instrukcja

9 Października 2024
Westinghouse

Westinghouse 72206 Instrukcja

9 Października 2024
Westinghouse

Westinghouse 78425 Instrukcja

9 Października 2024