Instrukcja obsługi TOA SR-SA

TOA Niesklasyfikowane SR-SA

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TOA SR-SA (1 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/1

4. SPECIFICATIONS

Steel plate, white, paint

165 (w) x 175 (h) x 220 (d) mm

1.7 kg (including accessories)

ST-32

Hexagon head bolt M5 x 20 with washer ...... 8

Number of Speakers

to be Mounted

Finish

Dimensions

Weight

Applicable Stand

(option)

Accessories

Note: The design and specifications are subject to change without

notice for improvement.

For step 3 and 4 below, refer to the instruction manual attached

to the ST-32.

Step 1. Remove the screws on both sides of the speaker.

Note: The removed screws are not used.

Step 2. Install the SR-SA4 Stand Adapter to the speaker.

Step 3. Attach the bracket (included in the ST-32) to the

SR-SA4 Stand Adapter.

Step 4. Mount the bracket onto the stand.

3. SPEAKER MOUNTING

Speaker

Hexagon head bolt M5 x 20

with washer (included in the SR-SA4)

SR-SA4 Stand adapter

Screw

(4 each on

both sides)

Bracket (included in the optional ST-32)

ST-32 Speaker Stand (optional)

Fixing bolt

When installing

the SR-S4L speaker

When installing

the SR-S4S speaker

Speaker mounting screw

(included in the ST-32)

Plain washer (included in the ST-32)

Note

When using the ST-32, set the

inner pipe to its lowest position.

INSTALLATION MANUAL

STAND ADAPTER SR-SA4

The SR-SA4 is designed to be used exclusively to mount the

SR-S4L or SR-S4S Line Array speaker on the ST-32 Speaker

Stand.

1. SAFETY PRECAUTIONS

• Before installation or use, be sure to carefully read all the

instructions in this section for correct and safe operation.

• Be sure to follow all the precautionary instructions in this

section, which contain important warnings and/or cautions

regarding safety.

• After reading, keep this manual handy for future reference.

• Do not use other methods than specified to mount the unit.

Extreme force is applied to the unit and the speaker could

fall off, possibly resulting in personal injuries.

• Tighten each nut and bolt securely. Ensure that the unit has

no loose joints after installation to prevent accidents that

could result in personal injury.

• Use the ST-32 Speaker Stand in combination. Doing

otherwise may cause the unit or component to fall off,

resulting in personal injury.

Indicates a potentially hazardous situation which, if

mishandled, could result in death or serious personal injury.

WARNING

• Avoid touching the unit's sharp metal edge to prevent injury.

Indicates a potentially hazardous situation which, if mishandled,

could result in moderate or minor personal injury, and/or property

damage.

CAUTION

Printed in Japan

133-01-443-30

SR-S4L SR-S4S

2. SPEAKER MOUNTING VIEW

Specyfikacje produktu

Marka:	TOA
Kategoria:	Niesklasyfikowane
Model:	SR-SA
Kolor produktu:	Anthracite,White
Wbudowany wyłącznik:	Tak
Moc:	800 W
Typ kontroli:	obrotowy
Długość przewodu:	1.2 m
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	220 - 240 V
Wysokość produktu:	390 mm
Szerokość produktu:	240 mm
Głębokość produktu:	215 mm
Waga produktu:	4300 g
Stopy antypoślizgowe:	Tak
Pojemność misy blendera:	1.25 l
Pojemność miski:	- l
Regulowana prędkość:	Tak
Prędkości:	2
Ostrze ze stali szlachetnej:	Tak
Liczba ostrz:	4
Wyciskarka do cytrusów:	Tak
Materiał wykonania miski:	Plastik