Instrukcja obsługi TOA RM-300X

TOA Niesklasyfikowane RM-300X

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TOA RM-300X (77 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/77

OPERATING INSTRUCTIONS

INTEGRATEd VOICE EVACUATION SYSTEM

VX-3000 SERIES

RM-200SF

VX-3004F

RM-300X

Thank you for purchasing TOA's Integrated Voice Evacuation System.

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

TABLE OF CONTENTS

Chapter 1 : NOMENCLATURE

1. VX-3004F, VX-3008F, ANd VX-3016F

VOICE EVACUATION FRAME ............................................................... 1-2

2. RM-200SF FIREMAN’S MICROPHONE

ANd RM-320F REMOTE MICROPHONE EXTENSION ........ 1-5

2.1. RM-200SF .......................................................................................................... 1-5

2.2. RM-320F ............................................................................................................ 1-7

3. RM-300X REMOTE MICROPHONE ANd

RM-210F REMOTE MICROPHONE EXTENSION

..................... 1-8

3.1. RM-300X ............................................................................................................ 1-8

3.2. RM-210F ............................................................................................................ 1-9

Chapter 2 : INdICATOR STATUS OF REMOTE MICROPHONES

1. RM-200SF FIREMAN’S MICROPHONE ANd

RM-320F REMOTE MICROPHONE EXTENSION

..................... 2-2

1.1. Indicator State at the Time of Zone Selection .................................................... 2-2

1.2. Talk Key Indicators ............................................................................................ 2-3

1.3. Indicator State at the Time of Base Pattern Change ........................................ 2-4

1.4. Indicator State at the Time of General-Purpose Broadcast Pattern ................. 2-4

1.5. Indicator State at the Time of General/BGM Broadcast ................................... 2-5

1.6. Indicator State at the Time of RM Broadcast Status Display ............................ 2-5

1.7. Indicator State at the Time of Lamp Test ........................................................... 2-6

1.8. Indicator State at the Time of Failure Output Receipt ........................................ 2-7

1.9. Indicator State at the Time of Failure Output Reset .......................................... 2-8

1.10. Indicator State at the Time of Emergency Broadcast Pattern Start ................ 2-9

1.11. Indicator State at the Time of Emergency Broadcast Pattern Stop ................ 2-10

1.12. Indicator State at the Time of Emergency Broadcast Pattern Start/Stop ....... 2-11

1.13. Indicator State at the Time of Emergency Sequence Stop ............................ 2-12

1.14. Indicator State at the Time of Emergency Sequence Phase Shift ................. 2-13

1.15. Indicator State at the Time of Emergency Reset ............................................ 2-14

1.16. Indicator State at the Time of Audio Monitor .................................................. 2-15

1.17. Indicator State at the Time of Intended Control Input ..................................... 2-15

1.18. Indicator State at the Time of Intended Control Output (Pulse) ...................... 2-16

1.19. Indicator State at the Time of Intended Control Output (Level) ...................... 2-16

1.20. Indicator State at the Time of Zone Volume Adjustment (Pulse) ................... 2-17

1.21. Indicator State at the Time of Input Volume Adjustment (Pulse) .................... 2-18

1.22. Indicator State at the Time of Emergency Warning Broadcast ...................... 2-19

2. RM-300X REMOTE MICROPHONE ANd

RM-210F REMOTE MICROPHONE EXTENSION

................... 2-20

2.1. Indicator State at the Time of Zone Selection .................................................. 2-20

2.2. Talk Key Indicators ........................................................................................... 2-21

2.3. Indicator State at the Time of Base Pattern Change ....................................... 2-21

2.4. Indicator State at the Time of General-Purpose Broadcast Pattern ................ 2-22

2.5. Indicator State at the Time of General/BGM Broadcast .................................. 2-22

2.6. Indicator State at the Time of RM Broadcast Status Display ........................... 2-23

2.7. Indicator State at the Time of Lamp Test ......................................................... 2-23

2.8. Indicator State at the Time of Failure Output Receipt ...................................... 2-24

2.9. Indicator State at the Time of Failure Output Reset ......................................... 2-25

2.10. Indicator State at the Time of Emergency Broadcast Pattern Start ............... 2-26

2.11. Indicator State at the Time of Emergency Broadcast Pattern Stop ................ 2-27

2.12. Indicator State at the Time of Emergency Broadcast Pattern Start/Stop ....... 2-28

2.13. Indicator State at the Time of Emergency Sequence Stop ............................ 2-29

2.14. Indicator State at the Time of Emergency Sequence Phase Shift ................ 2-30

2.15. Indicator State at the Time of Emergency Reset ............................................ 2-31

2.16. Indicator State at the Time of Audio Monitor ................................................. 2-32

2.17. Indicator State at the Time of Intended Control Input .................................... 2-32

2.18. Indicator State at the Time of Intended Control Output (Pulse) .................... 2-33

2.19. Indicator State at the Time of Intended Control Output (Level) ..................... 2-33

2.20. Indicator State at the Time of Zone Volume Adjustment (Pulse) .................. 2-34

2.21. Indicator State at the Time of Input Volume Adjustment (Pulse) ................... 2-35

2.22. Indicator State at the Time of Emergency Warning Broadcast ..................... 2-36

Chapter 3 : OPERATION

1. BGM ANd GENERAL BROAdCAST ................................................ 3-2

1.1. Broadcasting from the RM-200SF, RM-300X, RM-320F, and RM-210F ........... 3-2

1.2. Assignment Example ........................................................................................ 3-2

1.3. Operation Examples ......................................................................................... 3-3

2. EMERGENCY wARNING BROAdCAST ....................................... 3-9

3. EMERGENCY BROAdCAST ................................................................ 3-10

3.1. Typical System Examples ................................................................................ 3-10

3.2. Remote Microphone Operation Example ........................................................ 3-12

4. MAkING ALL-ZONE EMERGENCY BROAdCAST ................ 3-15

4.1. Priority Control of the All-Zone Emergency Broadcast ..................................... 3-15

4.2. Making All-zone Emergency Broadcast from the RM-300X ............................ 3-16

4.3. Making All-zone Emergency Broadcast from the RM-200SF .......................... 3-17

5. dETECTING FAULT ................................................................................... 3-18

5.1. Fault Detection Setting Example ...................................................................... 3-18

5.2. Case Example of Malfunction .......................................................................... 3-19

5.3. Remote Microphone's Operation Example ..................................................... 3-20

5.4. VX-3004F's Operation Example ...................................................................... 3-21

5.5. Example of Executing the Failure Reception and Failure Reset

by Way of the Control Input Terminals ............................................................ 3-22

6. LAMP TEST .................................................................................................... 3-23

6.1. Remote Microphone's Operation Example ...................................................... 3-23

6.2. VX-3004F's Operation Example ...................................................................... 3-24

7. OTHER FUNCTIONS ................................................................................. 3-25

7.1. Audio Monitor ................................................................................................... 3-25

7.2. Intended Control Input Operation .................................................................... 3-26

Specyfikacje produktu

Marka:	TOA
Kategoria:	Niesklasyfikowane
Model:	RM-300X
Kolor produktu:	Czarny
Typ produktu:	Mikrofon alarmowy
Materiał obudowy:	Kopolimer akrylonitrylo-butadieno-styrenowy (ABS)
Wysokość produktu:	76.5 mm
Szerokość produktu:	190 mm
Głębokość produktu:	215 mm
Certyfikat środowiskowy (zrównoważonego rozwoju):	CE
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	35 - 80 %
Pobór mocy:	- W
Napięcie:	15 - 40 V
Stosunek sygnału do szumu:	60 dB
Kolor obudowy:	Czarny
Zasięg częstotliwości:	100 - 20000 Hz
Zgodność z zasadami zrównoważonego rozwoju:	Tak