Instrukcja obsługi TOA SR-RF12

TOA nieskategoryzowany SR-RF12

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TOA SR-RF12 (32 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/32
OPERATING INSTRUCTIONS
Note that casters must be prepared separately.
Thank you for purchasing TOA Line Array Speaker.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
LINE ARRAY SPEAKERS
RIGGING FRAME
RIGGING SUPPORT BRACKET
TILT JOINT BRACKET
CLUSTER BRACKET
SR-C8L
SR-C8S
SR-C15B
SR-RF8
SR-SB8
SR-TP8
SR-CL8
TABLE OF CONTENTS
2
1. SAFETY PRECAUTIONS ............................................................................................... 3
2. GENERAL DESCRIPTION ............................................................................................. 5
3. FEATURES .......................................................................................................................... 5
4. INSTALLATION PRECAUTIONS ................................................................................. 5
5. DIMENSIONAL DIAGRAMS
5.1. Speaker Systems
5.1.1. SR-C8L Line array speaker ................................................................................... 6
5.1.2. SR-C8S Line array speaker .................................................................................. 6
5.2. Sub-Woofer Speaker System
5.2.1. SR-C15B Line array speaker ................................................................................ 7
5.3. Frame and Brackets
5.3.1. SR-RF8 Rigging frame .......................................................................................... 7
5.3.2. SR-SB8 Rigging support bracket .......................................................................... 8
5.3.3. SR-TP8 Tilt joint bracket ....................................................................................... 8
5.3.4. SR-CL8 Cluster bracket ........................................................................................ 8
6. BI-AMPLIFIER AND SINGLE-AMPLIFIER OPERATIONS
6.1. Bi-Amplier Operation ...................................................................................................... 9
6.2. Single-Amplier Operation ............................................................................................... 9
7. SWITCHING TO SINGLE-AMPLIFIER OPERATION MODE ............................ 10
8. DIGITAL PROCESSOR SETTINGS
8.1. SR-C8L and SR-C8S Systems ....................................................................................... 11
8.2. Combined SR-C8L or SR-C8S and SR-C15B Systems ................................................. 12
9. FLYING SYSTEMS USING THE SR-RF8 RIGGING FRAME
9.1. Flying System Outline .................................................................................................... 13
9.2. Assembling the SR-RF8 Rigging Frame ........................................................................ 15
9.3. Connecting the Rigging Frame to the Speaker .............................................................. 16
9.4. Connection Between Speakers ...................................................................................... 17
9.5. About the Flying Installations ......................................................................................... 18
10.
INSTALLING THE FLYING SYSTEM USING THE SR-CL8 CLUSTER BRACKET
10.1. Flying System Outline .................................................................................................. 19
10.2. Vertical Flying Installation ............................................................................................. 19
10.3. Horizontal Flying ........................................................................................................... 21
11. SPEAKER STACKING
11.1. Stack System Outline .................................................................................................... 23
11.2. Assembling the SR-RF8 Rigging Frame ....................................................................... 24
11.3. Connecting the Rigging Frame to the Speaker ............................................................. 25
11.4. Connections Between Speakers ................................................................................... 25
11.5. About Stacking ............................................................................................................. 26
12. USING THE SR-SB8 RIGGING SUPPORT BRACKET ...................................... 27
12.1. Level Adjuster Installation ............................................................................................ 27
12.2. Rigging Support Bracket Installation ............................................................................ 27
12.3. Frequent Attachment and Detachment of the Rigging Support Bracket ...................... 28
12.4. Adjust the Height With a Level Adjuster to Prevent Unstable Installation .................... 28
13. TILTING THE SPEAKER DOWNWARD .................................................................. 29
14. SPECIFICATIONS
14.1. SR-C8L and SR-C8S .................................................................................................... 30
14.2. SR-C15B ....................................................................................................................... 30
14.3. SR-RF8 ......................................................................................................................... 31
14.4. SR-SB8 ......................................................................................................................... 31
14.5. SR-TP8.......................................................................................................................... 31
14.6. SR-CL8 ......................................................................................................................... 31
1. SAFETY PRECAUTIONS
3
When Installing the Unit
• Avoid installing or mounting the unit in unstable
locations, such as on a rickety table or a slanted
surface. Doing so may result in the unit falling
down and causing personal injury and/or property
damage.
• Refer all installation work to the dealer from whom
the speaker was purchased. Installation for flying
requires extensive technical knowledge and
experience. The speaker may fall off if incorrectly
installed, resulting in possible personal injury.
• Flying precautions.
Be sure to follow the instructions below. Otherwise,
the suspension wires or belts may be off or snap
and the speaker may fall off, causing personal
injury.
· Check to confirm that the suspension wires and
belts are strong enough to
· The connectors of the suspension wires and belts
must be securely linked with those of the
speaker.
· All parts and components (such as enclosures,
metal pieces, and screws) must be free from any
deformation, crack, and corrosion.
· Be sure to use screws supplied with the optional
flying hardware when installing the speaker using
such hardware.
• Install the unit only in a location that can
structurally support the weight of the unit and the
mounting bracket. Doing otherwise may result in
the unit falling down and causing personal injury
and/or property damage.
• Since the unit is designed for in-door use, do not
install it outdoors. If installed outdoors, the aging of
parts causes the unit to fall off, resulting in personal
injury. Also, when it gets wet with rain, there is a
danger of electric shock.
• Owing to the unit's size and weight, be sure that at
least two persons are available to install the unit.
Failure to do so could result in personal injury.
When Installing the Unit
• Do not use other methods than specified to mount
the bracket. Extreme force is applied to the unit
and the unit could fall off, possibly resulting in
personal injuries.
• Use nuts and bolts that are appropriate for the
ceiling's or wall's material and structure. Failure to
do so may cause the unit to fall, resulting in
material damage and possible personal injury.
• Tighten each nut and bolt securely. Ensure that the
bracket has no loose joints after installation to
prevent accidents that could result in personal
injury.
• Use the specified mounting bracket in combination.
Doing otherwise may cause the unit or component
to fall off, resulting in personal injury.
• Do not mount the unit in locations exposed to
constant vibration. The mounting bracket can be
damaged by excessive vibration, potentially
causing the unit to fall, which could result in
personal injury.
• Do not install the unit in indoor swimming pools or
such locations where corrosion may occur easily.
The parts deteriorate if corroded, causing the unit
to fall, which could result in personal injury.
• Be sure to read this safety instructions in this section carefully in prior to use.
• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or
cautions regarding safety.
• After reading, keep this manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.
WARNING
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor injury, and/or property damage.
WARNING
CAUTION

Specyfikacje produktu

Marka: TOA
Kategoria: nieskategoryzowany
Model: SR-RF12

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z TOA SR-RF12, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany TOA

TOA

TOA SR-RF12 Instrukcja

28 Września 2024
TOA

TOA HY-C0801 Instrukcja

28 Września 2024
TOA

TOA HY-WM2 Instrukcja

28 Września 2024
TOA

TOA SR-FB4 Instrukcja

28 Września 2024
TOA

TOA SR-FS4 Instrukcja

28 Września 2024
TOA

TOA HY-PF7W Instrukcja

28 Września 2024
TOA

TOA YW-7000 Instrukcja

28 Września 2024
TOA

TOA HY-C0801W Instrukcja

6 Sierpnia 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024