Instrukcja obsługi TOA EM-700

TOA mikrofon EM-700

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TOA EM-700 (2 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

OPERATING INSTRUCTIONS

日本語の取扱説明書は裏面をご覧ください。

1. SAFETY PRECAUTIONS

• Before installation or use, be sure to carefully read

all the instructions in this section for correct and

safe operation.

• Be sure to follow all the precautionary instructions

in this section, which contain important warnings

and/or cautions regarding safety.

• After reading, keep this manual handy for future

reference.

• Avoid installing or mounting the unit in unstable

locations, such as on a rickety table or a slanted

surface. Doing so may result in the unit falling

down and causing personal injury and/or property

damage.

• Do not expose the unit to rain or an environment

where it may be splashed by water or other liquids,

as doing so may result in electric shock.

• Do not lay the connection cable where it can be

walked on or tripped over, causing personal injury.

2. GENERAL DESCRIPTION

The EM-700 is a cardioid boundary condenser microphone

suitable for installation on a lecture desk or table top in a

conference room for sound pick-up and public address

applications.

3. FEATURES

•Sound field characteristic correction in a condition being

placed on a flat surface such as a desk, realizing pure,

natural sound quality.

•A low cut switch that effectively eliminates noises such

as vibration noise from the installation surface.

• High-quality, low-profile, and unobtrusive design

4. HANDLING PRECAUTIONS

• Be sure to turn off the phantom power switch on the

equipment that the unit is connected to before

connecting or disconnecting the unit. As doing otherwise

may cause loud noise or damage to the unit or

connected equipment.

• Avoid installing the unit in humid or dusty locations, in

locations exposed to the direct sunlight, near the heaters,

or in locations generating sooty smoke or steam as doing

otherwise may result in unit failure.

• Take care not to drop the unit onto the floor nor bump it

against a hard object as the unit could fail.

• Avoid using a mobile telephone near the microphone in

use. Noise could be picked up.

• To clean, be sure to first disconnect the connection

cable, then wipe with a dry cloth. When the unit gets very

dirty, use a cloth damped in a neutral cleanser. Never

use benzene, thinner, alcohol, or chemically-treated

cleaning cloth because such volatile liquids could deform

or discolor the unit.

Thank you for purchasing TOA's Boundary Microphone.

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

EM-700BOUNDARY MICROPHONE

CAUTION

Indicates a potentially hazardous situation which,

if mishandled, could result in moderate or minor

personal injury, and/or property damage.

5. SPECIFICATIONS

Note: The design and specifications are subject to change

without notice for improvement.

Element Electret condenser

Polar Pattern Cardioid

Rated Impedance 120 , balancedΩ

Rated Sensitivity –33 dB (0 dB = 1 V/Pa, 1 kHz)

Frequency Response 35 Hz – 20 kHz

Low Cut Filter 100 Hz, –12 dB/oct.

Phantom Power 9 – 52 V DC

Output Connector XLR-3-12 or equivalent

Cable Length 7.5 m (24.61 ft)

Finish Body:

Die-cast aluminum, black, mat,

paint

Punched net:

Surface treated steel sheet, black,

mat, paint

Weight 290 g (0.64 lb)

133-04-189-70

URL: http://www.toa.jp/

6. APPEARANCE

83 (3.27)

23 (0.91)

Low cut switch

Speak into the microphone from the arrow

direction as it has unidirectional pattern.

Unit: mm (in)

XLR connector

7. LOW CUT SWITCH

Low cut switch

LOW CUT

To cut the vibration noise coming from the installation surface

or background noise (e.g. air conditioner), shift the low cut

switch located on the unit's back side to " " position.

8. CIRCUIT DIAGRAM

Low cut circuit

Filter circuit

Power circuit

Hot

Cold

Shield

Body earth

9. DIRECTIVITY CHARACTERISTICS

90°

120°

150°

180°

240°

270°

210°

300°

330°

0°

30°

60°

1 kHz

4 kHz

10. FREQUENCY RESPONSE

When the low cut filter is active

Response

[dB]

Frequency

20 50 100 500 1 k 5 k 10 k 20 k

[Hz]

Traceability Information for Europe (EMC directive 2004/108/EC)

Manufacturer:

TOA Corporation

7-2-1, Minatojima Nakamachi, Chuo-ku, Kobe, Hyogo, Japan

Authorized representative:

TOA Electronics Europe GmbH

Suederstrasse 282, 20537 Hamburg, Germany

Specyfikacje produktu

Marka:	TOA
Kategoria:	mikrofon
Model:	EM-700
Kolor produktu:	Czarny
Waga produktu:	290 g
Długość kabla:	7.5 m
Technologia łączności:	Przewodowa
Częstotliwość mikrofonu:	35 - 20000 Hz
Czułość mikrofonu:	-33 dB
Impedancja mikrofonu:	120 Ω
Wymiary produktu (SxGxW):	83 x 83 x 23 mm
Głębokość:	3.27 "
Wysokość (imperialna):	0.91 "
Szerokość (imperialna):	3.27 "
Typ przewodu:	XLR-3-12