Instrukcja obsługi Thorens TD 850

Thorens Sprzęt DJ-ski TD 850

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Thorens TD 850 (4 stron) w kategorii Sprzęt DJ-ski. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
TD 800 Series
Instruction Manual
Dear Thorens customer, many thanks for your confidence
into our product, the record player of the 800 Series. With
the purchase of your record player you acquired a precision
instrument for the playback of records. To make him sound
perfect there is some attention necessary for setup and
handling. The manufacturing of this drive and the assembly
takes place completely in Germany at the highest enginee-
ring standarts - this still guarantees highest quality after
years. Understandably you want to start as immediately as
possible with listening to music. We ask you however:
Please read this guidance before the first use attentively, so
that you can use the drive optimally. We tried to put all the
necessary information into this manual. If you should have
still questions, which are not answered here, then you con-
tact us directly at www.Thorens.ch or with e-mail: tech-
nik@Thorens.ch.
Your team of Thorens
Conformity Declaration
We acknowledge the fact that the device belongs to this
instruction manual corresponds to valid EEC guidelines at
the time of printing for the acquisition of the CE-Sign. All the
necessary checks were made with positive result.
Warranty
Thorens manufacturer warranty. We commit ourselves to
replace incorrect sections of this device free of charge if it
should fail within the guarantee period. The warranty
amounts 2 year s for the turntable, counted starting from the
purchase date. The terms of the warranty are valid only if
within 4 weeks the enclosed warranty card is transmitted or
sended and filled out to Thorens. If this should not occur,
the warranty is 12 months. The manufacturer warranty
going beyond the legal warranty duration of 12 months ent-
itled Thorens to make on his own decision exchange or
repair of the defective sections. If a defect of your device
occurs within the guarantee period, then you inform
Thorens or your dealer under specification of the type of the
problem. Damage, which take place via neglect of the ope-
rating instruction or via outside mechanical effects, as well
as transport damages are not taken off by the warranty. The
warranty extends only to the turntable and the motor inclu-
sive power pack. Tone arm and pick-ups have the warranty
granted by the respective manufacturer. Warranty is valid
only for the first owner of the turntable. Sending the warr-
ranty card could be done by e-mail to technik@Thorens.ch
or by mail to THORENS EXPORT COMPANY LTD
IM JUNKHOLZ 44 ·
CH-4303 KAISERAUGST-BASEL / SWITZERLAND
Use of the turntable
Your turntable has been built to be used in closed rooms.
Please only use it in such rooms. Make sure that there is
not water or humidity close to the turntable or the PS 800
power supply.
The PS Power pack operates with 115V/230V main voltage.
Do never open it before pulling the main plug. There are no
user serviceable parts inside the PS 800.
In any case of a damage or question please contact your
importer or us.
Setup of the turntable
To avoid damages during transport your turntable comes
carefully packed and separated. Take out carefully all the
included parts. Place the included plates for the spikes
where you want to have the turntable playing. Place the
chassis on top of them. Adjust the correct height by turning
the spikes. Check the correct adjustment with a spirit level.
Now place the turntable platter with his axle over the bea-
ring and let it slide into it. Take care that the front end of the
axle is not crashing onto the bearing bottom. Then place the
rubber belt around the platter and the motor. Now put the
feltmat on the platter
Connecting the motor
Connect the motorcable with the power pack Ps 800. The
backside of the ps 800 offers 1 connector for motor. So plug
in the motor cable into the Ps 800 and lock the screws.
Make sure that the ON/OFF switch at the front side is in Off
position and the speed selector is on 33 rpm. Then plug in
the 3-pin connector from the external AC/AC adaptor to the
plug on the back of the PS800. Then connect the main
power cable to the AC/AC adaptor.
CAUTION! Never plug or unplug a motor while the Ps
800 is running. It will be damaged!
The Ps 800 power pack gets warm make sure that it is stan-
ding free so that the air can circulate.
On the Front of the Ps 800 are 2 switches. The left one is
for switching the Ps 800 on and off. An LED indicates the
operation. The right one is the speed selector. The you can
select between 33 and 45 rpm.
Because of an overload protection you must let the
turntable run for 33 rpm before switching to 45rpm. If
you do not do that the turntable will not spin at 45rpm.
Connecting the tonearm
Use the supplied RCA cable(Blue) and plug it into the plugs
on the back side of the turntable behind the tonearm. White
is left and red is right channel.
If your tonearm has not been supplied from Thorens please
use the manual supplied with the tonearm to make the
connection correct. This is only for turntables with Thorens
TP 250 or TP 300 tonearm factory mounted.
So now your turntable is ready to play.
If you have any questions please contact our service at:
e-mail: technik@thorens.ch
or your local distributor.
Thorens TP 300
Anti Skating(Bias) adjustment
Set the bias adjustment knob to the same number as the
tracking force. NOTE: This setting is not critical and a figu-
re of 1-1.5g will normally be suitable for moving magnet car-
tridges and 1.5-2g for most of the MC cartridges.

Specyfikacje produktu

Marka: Thorens
Kategoria: Sprzęt DJ-ski
Model: TD 850

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Thorens TD 850, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Sprzęt DJ-ski Thorens

Thorens

Thorens TD 240-2 Instrukcja

9 Września 2024
Thorens

Thorens TD 810 Instrukcja

8 Września 2024
Thorens

Thorens TD MINI Instrukcja

22 Sierpnia 2024
Thorens

Thorens TD 206 Instrukcja

20 Sierpnia 2024
Thorens

Thorens TD 850 Instrukcja

20 Sierpnia 2024
Thorens

Thorens TD 2030 Instrukcja

7 Sierpnia 2024
Thorens

Thorens TD 190-2 Instrukcja

7 Sierpnia 2024
Thorens

Thorens TD 203 Instrukcja

6 Sierpnia 2024

Instrukcje Sprzęt DJ-ski

Najnowsze instrukcje dla Sprzęt DJ-ski

Line 6

Line 6 Helix Control Instrukcja

11 Stycznia 2025
AlphaTheta

AlphaTheta DDJ-GRV6 Instrukcja

8 Stycznia 2025
Glorious

Glorious Record Box 55 Instrukcja

4 Stycznia 2025
Glorious

Glorious Record Box Display Door Instrukcja

4 Stycznia 2025
Glorious

Glorious Session Cube XL Instrukcja

4 Stycznia 2025
Glorious

Glorious Modular Mix Station Instrukcja

4 Stycznia 2025
Glorious

Glorious Record Box Advanced 110 Instrukcja

4 Stycznia 2025
Glorious

Glorious Mix Station 2 Instrukcja

4 Stycznia 2025
Glorious

Glorious CD Box 90 Instrukcja

4 Stycznia 2025
Glorious

Glorious Record Box 230 Instrukcja

4 Stycznia 2025