Instrukcja obsługi Texas Instruments SN74HC365N


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Texas Instruments SN74HC365N (27 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/27
SNx4HC365 Hex Buffers and Line Drivers With 3-State Outputs
1 Features
Wide operating voltage range of 2 V to 6 V
High-current 3-state outputs drive bus lines, buffer-
memory address registers, or drive up to 15
LSTTL loads
True outputs
Low power consumption, 80-µA max ICC
Typical tpd = 10 ns
±6-mA output drive at 5V
Low input current of 1µA max
2 Description
The SNx4HC365 contains six independent buffers
with 3-state outputs. All channels are placed into
the high-impedance mode when either of the output
enable (OE) pins are set to the high state.
Device Information
PART NUMBER PACKAGE(1) BODY SIZE (NOM)
SN54HC365J CDIP (16) 24.38 mm × 6.92 mm
SN74HC365D SOIC (16) 9.90 mm × 3.90 mm
SN74HC365N PDIP (16) 19.31 mm × 6.35 mm
SN74HC365NS SO (16) 6.20 mm × 5.30 mm
SN74HC365PW TSSOP (16) 5.00 mm × 4.40 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
A2
A3
A1
OE2
Y1
Y2
Y3
A6 Y6
A4
A5
Y4
Y5
OE1
Functional Block Diagram
SN54HC365, SN74HC365
SCLS308E – JANUARY 1996 – REVISED MARCH 2022
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Table of Contents
1 Features............................................................................1
2 Description.......................................................................1
3 Revision History.............................................................. 2
4 Pin Configuration and Functions...................................3
5 Specifications.................................................................. 4
5.1 Absolute Maximum Ratings........................................ 4
5.2 Recommended Operating Conditions(1) ..................... 4
5.3 Thermal Information....................................................4
5.4 Electrical Characteristics.............................................5
5.5 Switching Characteristics ...........................................5
5.6 Operating Characteristics........................................... 6
6 Parameter Measurement Information............................ 7
7 Detailed Description........................................................8
7.1 Overview.....................................................................8
7.2 Functional Block Diagram........................................... 8
7.3 Device Functional Modes............................................8
8 Power Supply Recommendations..................................9
9 Layout...............................................................................9
9.1 Layout Guidelines....................................................... 9
10 Device and Documentation Support..........................10
10.1 Documentation Support.......................................... 10
10.2 Receiving Notification of Documentation Updates..10
10.3 Support Resources................................................. 10
10.4 Trademarks.............................................................10
10.5 Electrostatic Discharge Caution..............................10
10.6 Glossary..................................................................10
11 Mechanical, Packaging, and Orderable
Information.................................................................... 10
3 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision D (October 2003) to Revision E (March 2022) Page
Updated the numbering, formatting, tables, figures, and cross-references throughout the document to reflect
modern data sheet standards............................................................................................................................. 1
SN54HC365, SN74HC365
SCLS308E – JANUARY 1996 – REVISED MARCH 2022 www.ti.com
2Submit Document Feedback Copyright © 2022 Texas Instruments Incorporated
Product Folder Links: SN54HC365 SN74HC365
4 Pin Configuration and Functions
J, D, N, NS, or PW package
16-Pin CDIP, SOIC, PDIP, SO, TSSOP
Top View
FK package
20-Pin LCCC
Top View
www.ti.com
SN54HC365, SN74HC365
SCLS308E – JANUARY 1996 – REVISED MARCH 2022
Copyright © 2022 Texas Instruments Incorporated Submit Document Feedback 3
Product Folder Links: SN54HC365 SN74HC365


Specyfikacje produktu

Marka: Texas Instruments
Kategoria: Niesklasyfikowane
Model: SN74HC365N

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Texas Instruments SN74HC365N, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Texas Instruments

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane