Instrukcja obsługi Tesco FP11

Tesco Robot kuchenny FP11

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tesco FP11 (2 stron) w kategorii Robot kuchenny. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Slicing and Grating Reassembly and Storage

Feed the food steadily into the appliance. DO NOT force the food: Place the S blade (with the blade protector attached) on the drive shaft.

allow the blade to do the work. Too much force will overload the unit The plate attachment can be placed in the bowl.

and may stall the motor. Fit one blade to the plate holder. Place the other blade on top at right

If you are feeding in celery stalks for example, you may start with the angles to the lower plate.

pusher out and then use the pusher to finish the process. Attach the lid. Reassemble the pusher and feed tube and insert it in the

For larger slices, cut the food so that the pieces fit horizontally into the funnel.

funnel and then use the pusher to complete the task. Loosely coil the cable and store the unit in a dry cool cupboard out of

Do not run the appliance continuously for more than 2 minutes. the reach of children and pets.

After extended use allow the unit to cool for 3 minutes before the

next use.

After Use

Turn the speed selector to the '0' position (OFF). Unplug the appliance

from the mains.

After Processing:

Remove the lid, the S blade, the feed tube and pusher. Disassemble the

pusher

Remove the bowl from the Motor Unit (turning the bowl anti-clockwise)

and empty the bowl.

Immerse all the above items in warm soapy water and clean them with

a damp cloth or soft brush. Rinse thoroughly and allow to dry.

Extreme caution must be taken when handling the blade as it is very

sharp. As soon as the blade is dry replace the protective cover.

Wipe the motor unit all over with a soft cloth dampened with soapy

water followed with a clean damp cloth. Ensure the interlock areas are

free of food particles. Dry well. Do not immerse the motor unit, mains

cable or plug in water.

After Slicing/Grating:

Remove the lid, the feed tube and pusher. Disassemble the pusher.

Lift out the plate holder. Class II construction double insulated. This product must not

Remove the bowl from the Motor Unit (turning the bowl anti-clockwise) be connected to earth.

and empty the bowl.

Remove the slicing/grating plate from the holder.

Immerse all the above items in warm soapy water and clean them with

a damp cloth or soft brush. Rinse thoroughly and allow to dry.

Extreme caution must be taken when handling the blade as it is very

sharp.

Wipe the motor unit all over with a soft cloth dampened with soapy

water followed with a clean damp cloth. Ensure the interlock areas are

free of food particles. Dry well. Do not immerse the motor unit, mains

cable or plug in water.

If your appliance suddenly stops

Switch the selector to ‘0' (off). Unplug the unit and wait fot 15 minutes

until the unit has completely cooled down. Reconnect the power and

resume using the appliance,.

Warranty

Your appliance is covered by a warranty for 12 months from the date of

purchase. If a fault develops during this period, please return the unit

to your nearest Tesco store together with the original receipt as proof of

purchase. This warranty in no way affects your consumer rights.

Specification

Power: 220-240 VAC 50Hz, 550W

SPL: <85dbA

Duty Cycle: 3 min max.

Weight: 3.2Kg

Recommended Operating Times and Speeds

FP11 Food Processor User Guide

UK: Waste electrical products should not be disposed of

with household waste. Separate disposal facilities exist, for

your nearest facilities see www.recycle-more.co.uk or in-

store for details.

ROI: Produced after 13th August 2005. Waste electrical

products should not be disposed of with household waste.

Please recycle where facilities exist. Check with your Local

Authority or retailer for recycling advice.

Page 5

Food Processor

USER GUIDE

FP11

Tesco Stores Ltd, Delamare Road,

Cheshunt, Herts, EN8 9SL

Assembling your processor for slicing or grating

A: Ensure the appliance is disconnected from the mains.

Place the unit on a solid level surface and hold it securely.

Place the bowl on the motor base and and then turn the bowl

clockwise until it is locked onto the motor base. The ‘LOCK’

mark on the bowl should align with the arrow on the base,

B: Place the plate shaft onto the motor shaft and check it is

secure.

Do not place ingredients into the bowl. Wait until the lid is

in place and then insert the ingredients through the funnel

in the lid.

C: Place the prepared plate onto the attachment and check it

is secure.

D: Place the lid on the bowl. Locate the lug to the left of the slot in the motor

unit. Turn the lid clockwise (to the right) and lock it firmly into position.

Insert the feed tube and pusher into the funnel if needed

Meat, Vegetables

Cheese, Chocolate Pulse operation gives control over texture

700g

Chopping Pulse

‘S’ Blade 30 sec. bursts

Meat, Vegetables

Cheese, Chocolate Increase time for finer texture.

700g

Chopping 1

‘S’ Blade 30 sec.

Soups, Drinks, etc 700g

Blending 1

‘S’ Blade 20 sec.

Cooked vegetables,

potatoes, fruit 700g

Purees 1;2

‘S’ Blade 10-15 sec.

Vegetables, cheese

potatoes, fruit

Slicing 2;3

Slicing Plate

Vegetables, cheese

fruit, chocolate.

Shredding 2;3

Shredding Plate

FOOD COMMENT

MAX. QTY

FUNCTION SPEED

TOOL TIME

Food Preparation

Operation

Hints and tips

The appliance has three speeds, 1-3 (low-med-high) and pulse mode.

This appliance is not suitable for chopping hard items such as ice 1. The metal blade can be used for

cubes or frozen produce. chopping meat, fish vegetables

Remove all bones from meat, stones from fruit, etc. Cut the food into cheese etc. setting the speed to

suitable small pieces (25mm, 1" for hard foods and meat.) maximum.

The maximum quantity of food you can process at any one time should 2. For finer chopping increase the

not exceed 700g for soft items and 600g for nuts and other items. length of time you process.

We suggest you keep the liquid content of food to be processed to a 3. For coarse chopping, use the

minimum as excess liquid can penetrate the motor. pulse button for a few seconds and

Items for processing can be placed in the bowl before attaching the lid monitor the texture.

or introduced via the funnel after assembly. For pulse operation, move the

Items for slicing should be cut into pieces which can fit into the funnel. If selector to ‘P’ and hold it. This

you are using the feed tube these will need to be smaller than if you are processes food at very high speed

using the funnel alone. so only use pulse mode in very

short repeated bursts.

Refer to the table on the next page for advice on which speed to use for

Assemble the appliance. Make sure the selector is switched to ‘0' (off). best results.

Plug the unit into the mains supply and switch on at the mains. It may be necessary with some foods to stop the unit, and re-distribute

the food before continuing. Always switch the selector to ‘0' and

unplug the appliance before removing the lid.

C D

Page 2

$Read all the instructions carefully before using your use of the appliance by a person responsible for their

appliance and keep them for future reference. safety.

$Unplug the appliance from the mains supply when not in $Children should be supervised to ensure that they do not

use, when removing or attaching accessories, or before play with the appliance.

cleaning any part of the appliance. When operating your appliance:

$This appliance is for occasional household use only. $When the appliance is not in use make sure that it is safely

$Do not use outdoors or in damp conditions. unplugged from the mains supply.

$Do not immerse the motor unit or the electrical cord or plug $To reduce the risk of injury, never attach the blade without

in liquids. first securing the bowl properly in place.

$Do not use near a source of heat or on an unstable surface. $When using the appliance ensure there is adequate room

in the vessel.

$Ensure that the power cord does not touch any hot surface

and that it does not overhang the edge of your work $Do not operate the appliance with an empty bowl.

surface. $Do not run the appliance continuously for more than 3

$Before unplugging the power cord switch the machine off. minutes. After a prolonged period of continuous use let the

When unplugging, hold the plug top, not the power cord. unit rest for 25-30 minutes before using it again.

$Do not operate any appliance with a damaged cord or $The blades on this appliance are sharp. Treat them with

plug or after the appliance malfunctions, or is dropped or care at all times and never allow fingers, hair, or clothing

damaged in any manner. Return the appliance to the to come into contact with a blade.

nearest authorised service facility for examination, repair $If you wish to scrape the contents of the bowl with a spatula,

or electrical or mechanical adjustment. remove the blade first.

$Do not use attachments or accessories which are not $Do not process food containing hard objects, such as meat

recommended by the manufacturer. They may cause containing bones or fruits with large hard stones, which

malfunction or injury. cannot be safely broken up by the blade.

$Do not attempt to replace the power cord on this $If a blade gets clogged, switch off, unplug from the mains

appliance. This should only be carried out by authorised and allow the unit to stop before clearing the obstruction.

service personnel with specialist tools. $Operate the appliance is on a sturdy work surface. and

$Store the appliance away from direct sunlight and out of hold or support it during operation

the reach of children. $Do not yank or pull the cord as this may damage it and

$There are no user serviceable parts in your appliance eventually cause a risk of electric shock.

Unauthorised dismantling or servicing will void the product $To protect against fire, do not operate the unit in the

warranty. presence of explosive and/or flammable fumes.

$Do not use the appliance for any purpose not expressly $Keep the appliance out of the reach of children.

specified in this manual.

$NOTE: Never process liquids or foods with a high liquid

$This appliance is not intended for use by persons (including content as they may leak into the appliance motor.

children) with reduced physical, sensory or mental

$NEVER process hot foods, and especially hot liquids.

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning

Safety Guide-Please Read Carefully

FP11 Food Processor User Guide

Preliminaries

Introduction

Always make sure the appliance is unplugged from the mains

Refer to the illustration on the next page and identify the when cleaning, attaching or removing accessories

components.

Before using your appliance for the first time:

The packaging contains:

Disassemble the mixer. Refer to the assembly instructions on

$The processor motor, mixing bowl and lid

the next pages and reverse the procedure.

$Feed tube and Pusher

Separate the mixing bowl and the lid from the motor unit.

$‘S’ Blade and blade cover

Disassemble the Pusher and feed tube.

$Grating Plate

Remove the protective cover from the S blade.

$Slicing Plate

Ensure the Grating and Slicing plates are removed from the

$Plate Holder

plate holder.

$Plate Shaft

Wash the S blade and the grating and slicing plates in warm

Remove all packaging from the appliance. Retain the soapy water, taking care not to touch the cutting surfaces.

packaging. If you dispose of it please do so according to Rinse and dry thoroughly. Replace the protective cover on the

any recycling regulations. S blade.

If items are missing or damaged, contact your nearest Tesco Now wash the plate holder and shaft, the mixing bowl and lid,

store for assistance. the pusher and feed tube in warm soapy water, rinse and dry

Read and retain the manual. If you pass the product on to a thoroughly.

third party, make sure to include this manual. Wipe the motor unit with a damp cloth and dry thoroughly.

Your Food Processor Components

Page 3 Page 4

Lid

Motor Unit

Mixing Bowl

Speed Control

Power Cord

Slicing Plate

Plate Holder

Grating Plate

Plate Shaft

S Blade Cover

S Blade and Shaft

Feed Tube

Pusher

1: Ensure the appliance is disconnected from the mains.

Place the unit on a solid level surface and hold it securely.

Place the bowl on the motor base and then turn the bowl

clockwise until it is locked onto the motor base. The ‘LOCK’

mark on the bowl should align with the arrow on the base,

2: Hold the S blade attachment as shown. Gently

squeeze the protective cover and then remove it, taking

care not to touch the blade. If necessary wear

protective gloves.

To replace the cover reverse the procedure.

3: Place the blade onto the motor shaft and check it is secure.

You may now place ingredients into the bowl or wait until the

lid is in place and then insert the ingredients through the funnel

in the lid.

4: Place the lid on the bowl. Locate the lug to the left of the slot in the motor

unit. Turn the lid clockwise (to the right) and lock it firmly into position.

IF THE BOWL AND THE LID ARE NOT SECURELY LOCKED THE

APPLIANCE WILL NOT OPERATE. THIS IS A SAFETY FEATURE

You may optionally use the feed tube/pusher

assembly.

5: The pusher may be used locked or unlocked to the

feed tube. When the pusher is locked the feed tube

acts as a stopper when it is inserted into the funnel in

the lid.

6: To unlock the pusher rotate it so that the knurled

part is parallel with the feed tube. To lock it rotate it so

that the knurled part is at right angles to the feed tube.

Note: The pusher has a scale on the side so it can be

used to measure small amounts of dry ingredients or

liquids.

LOCKED UNLOCKED

Assembling Your Processor

The assembly procedure varies slightly depending on whether you are using the appliance for processing food or slicing/grating.

Assembling the Processor for normal use Preparing the plate holder for grating or slicing

To attach the slicing or grating plate: At the side of the plate by the blade end there is a small tab. Place this in

the recess at the side of the holder and press down to lock the plate in place. The plates will only fit one way.

To remove the plate: Lift the plate up at the end removed from the blade and then remove the plate.

Take care not to touch the blade. If necessary wear protective gloves.

ATTACH REMOVE

Funnel

Specyfikacje produktu

Marka:	Tesco
Kategoria:	Robot kuchenny
Model:	FP11

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Tesco FP11, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Robot kuchenny Tesco

Tesco FP11 Instrukcja

4 Lipca 2024

Tesco FP15 Instrukcja

4 Lipca 2024

Instrukcje Robot kuchenny

Najnowsze instrukcje dla Robot kuchenny

Comfee MJ-LZ30W223 Instrukcja

9 Października 2024

Turmix varioTronic Professional Instrukcja

9 Października 2024

Sencor STM 3631GR Instrukcja

9 Października 2024

MPM MRK-24 Instrukcja

9 Października 2024

KitchenAid KSM70SN Instrukcja

9 Października 2024

KitchenAid KTCR350 Instrukcja

9 Października 2024

KitchenAid KSM55 Instrukcja

9 Października 2024

Philips Pet Series PAW3210 Instrukcja

9 Października 2024

Philips HR7773 Instrukcja

8 Października 2024

Costway EP24664 Instrukcja

8 Października 2024