Instrukcja obsługi Teltonika RUTM10

Teltonika router RUTM10

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Teltonika RUTM10 (11 stron) w kategorii router. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/11

RUTM10

DATASHEET // RUTM10

HARDWARE

POWER SOCKET PINOUT

FRONT VIEW

BACK VIEW

WAN Ethernet

port

LAN Ethernet

ports

Reset

button

Power

socket

Power

LED

USB port

LAN LEDs

WAN LEDs

Grounding

screw

Wi-Fi antenna

connector

(RP-SMA female)

Wi-Fi antenna

connector

(RP-SMA female)

Wi-Fi Band

LEDs

Power / Red wire

Input / Green wire

Ground / Black wire

Output / White wire

Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing

TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP,

Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)

H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

Port forward, traﬃc rules, custom rulesFirewall

VoIP passthrough support

Connection monitoring

Routing

Network protocols

View all your Firewall statistics, rules, and rule counters

View device ports, enable and disable each of them, turn auto-conﬁguration on or oﬀ, change their transmission speed, and so on

Visual representation of your network, showing which devices are connected to which other devices

Static and dynamic IP allocation, DHCP relay, DHCP server conﬁguration, status, static leases: MAC with wildcards

Traﬃc priority queuing by source/destination, service, protocol or port, WMM, 802.11e

QoS / Smart Queue

Management (SQM)

Network topology

DHCP

Firewall status page

Ports management

3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

WAN

LAN

ETHERNET

NETWORK

Pre-shared key, digital certiﬁcates, X.509 certiﬁcates, TACACS+, Radius, IP & login attempts block, time-based login blocking,

built-in random password generator

Pre-conﬁgured ﬁrewall rules can be enabled via WebUI, unlimited ﬁrewall conﬁguration via CLI; DMZ; NAT; NAT-T

DDOS prevention (SYN ﬂood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN,

SYN-RST, X-mas, NULL ﬂags, FIN scan attacks)

Port and tag-based VLAN separation

Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites onlyWEB ﬁlter

Attack prevention

VLAN

Authentication

Firewall

Flexible access control of SSH, Web interface, CLI and TelnetAccess control

SECURITY

802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition,

Access Point (AP), Station (STA)

WPA2-Enterprise - PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes,

client separation, EAP-TLS with PKCS#12 certiﬁcates, disable auto-reconnect

ESSID stealth mode

Up to 150 simultaneous connections

Wireless mesh (802.11s), fast roaming (802.11r), BSS transition management (802.11v), radio resource measurement (802.11k)Wireless Connectivity Features

SSID/ESSID

Wi-Fi users

Wireless mode

Wi-Fi security

Whitelist, blacklist

Once scanned, a user will automatically enter your network without needing to input login information

Wireless MAC ﬁlter

Wireless QR code generator

WIRELESS

Supported >25 service providers, others can be conﬁgured manually

DDNS

Wi-Fi WAN, VRRP, Wired options, each of which can be used as an automatic Failover