Instrukcja obsługi Telefunken TTV-149


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Telefunken TTV-149 (11 stron) w kategorii Telewizja. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/11
TTV-149
FULL ON SCREEN DISPLAY
255 PROGRAMS MEMORY
WITH INFRARED REMOTE CONTROL
Color Television
OWNER'S MANUAL
OWNER'S MANUAL
OWNER'S MANUAL
OWNER'S MANUALOWNER'S MANUAL
Thank you for purchasing this colour television.
To fully enjoy your set from the very beginning, read this manual carefully and keep it
handy for future reference.
Installation and Safety
To ensure safe and reliable operation of the TV set, please observe the following precautions in installation,
operation and maintenance.
Attention:
Pay attention to the power supply cord before installing the TV set. Do not hang anything on the cord, and
avoid treading on the cord.
The slots on the back housing are designed for ventilation to prevent overheating. They must never be covered
or blocked. The TV set must not be placed near a heat source such as radiator, air ducts direct sunlight.
The outdoor antenna must not be erected close to HV lines or other power supply lines. Use extreme care when
erecting the antenna.
4 This TV must be connected to AC 240V 50Hz. Never connect to DC supply or any other power supply
5 Do not let any object fall into the ventilation openings of the TV set housing, nor let any liquid flow into the it
via the openings. This may cause the television to short circuit
6 Do not subject the TV set to rain, or use it in damp environment. In cleaning dust, be sure to remove the power
supply plug from its socket first. Do not clean the television with liquid detergent, use a damp cloth. Be sure to remove
the power supply plug from its socket and remove the antenna plug during a thunderstorm or when it will not be used
for long time, to avoid components being damaged by lightning.
7 If you use an indoor antenna, do not let it touch any electrical appliance, or normal reception of TV program may
be affected.
Safety:
1Never open the rear of the television. High Voltage components can cause fire, electric shock or injury. Qualified
TV service personnel should carry out all internal work.
2. Remove the power supply plug from its socket in case of the following conditions, and consult with service
personnel.
(1) The power cord and plug is damaged or cracked.
(2) Any object has fallen into or liquid flown into the TV set.
(3) The performance of TV set has deteriorated significantly or there is damage on the housing.
(4) The TV set will not operate normally according to the instructions.
3. Please remove the power supply plug from its socket when the TV set will not be used for long time.
The adjusting buttons and some sockets are in the front of the TV, other sockets are in the rear of the TV.
Main power switch
Remote control sensor
Power indicator
Program number down (P-) and up (P+)
Volume decrease (V-) and increase (V+)
Menu button
TV/AV button
AV IN sockets
Antenna input and AV IN/OUT sockets
Connection of video signal
If you wish to receive video signal from the video player (for example: VCR, VCD or DVD), you must insert the
players audio and video output plugs into this TV’s relevant AV input sockets which are two groups in the rear and
front of the TV respectively. As the audio input of the TV is monophonic, be careful not to insert two audio inputs (L
and R) into each group’s two sockets at the same time, and the sockets in the front and the rear can not be used at the
same time. Then press the TV/AV button to get the picture of video signal.
The TV can broadcast the audio and video signals of received programs from the antenna. The output sockets are in
the rear panel (AV-OUT).
Connection of antenna
The RF signal received from antenna is received through the RF input socket in the rear panel. In order to get a
good reception, it is necessary to use an outdoor antenna or common antenna TV (CATV) cable .The 75Ω coaxial
cable is recommended for eliminating the interference and noise lines resulting from mis-matched impedance .If you
use the 300 adapter according to the following figure. Ω parallel flat cable, please connect with 300Ω Ω-75
Battery installation (as shown in figure)
(1) Open the cover.
(2) Put in the batteries. Be sure
that the polarity (+or-)of the
batteries matches that of marks
inside the remote control.
(3) Replace the cover.
If following happens, replace with new
batteries. For example: remote control does
not work normally or cannot control the T
V
or is not stable, please replace batteries
according to the figure.
Attention: Exchange weak batteries to
p
revent leakage of battery acid into the
remote control. Do not charge, short circuit,
heat or burn normal batteries. Do not use
batteries, such as soda cell and C-Zn cell etc.


Specyfikacje produktu

Marka: Telefunken
Kategoria: Telewizja
Model: TTV-149

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Telefunken TTV-149, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Telewizja Telefunken

Instrukcje Telewizja

Najnowsze instrukcje dla Telewizja

Samsung

Samsung QN85QN800AF Instrukcja

15 Października 2024
Thomson

Thomson 24TM2490 Instrukcja

15 Października 2024
Daewoo

Daewoo DSJ-5520 Instrukcja

15 Października 2024
Sharp

Sharp LC-52D65U Instrukcja

15 Października 2024
Medion

Medion MD30348 Instrukcja

15 Października 2024
Hisense

Hisense 50A7100FTUK Instrukcja

15 Października 2024
Bauhn

Bauhn ATV24HDW-0224 Instrukcja

15 Października 2024
Bauhn

Bauhn ATV32HDW-0824 Instrukcja

15 Października 2024
Bauhn

Bauhn ATV75UHDW-0324 Instrukcja

15 Października 2024
Bauhn

Bauhn ATV70UHDW-0624 Instrukcja

15 Października 2024