Instrukcja obsługi Techno Line WS7079S

Techno Line Stacja pogodowa WS7079S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Techno Line WS7079S (7 stron) w kategorii Stacja pogodowa. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/7



WIRELESS 433 MHz WEATHER STATION

Instructions Manual

INTRODUCTION:

Congratulations on purchasing this Weather Station with wireless 433 MHz

transmission of outdoor temperature and display of indoor temperature and

humidity, weather forecast icons and weather tendency indicators. It is further

featuring a DCF-77 radio controlled clock with calendar display, and four easy to

use function keys, this innovative product is ideal for use in the home or office.

THE WEATHER STATION

SETTING UP:

1. First, insert the batteries into the Weather station (see “How to install and

replace batteries in the Weather Station” below). Once the batteries are

in place, all segments of the LCD will light up briefly. Following some test

data display, the indoor temperature and humidity, the time as 0:00 the

date as 1.1. and the weather icons sun and clouds will be displayed. If the

indoor temperature and humidity are not displayed after 30 seconds,

remove the batteries and wait for at least 10 seconds before reinserting

them. Once the indoor data is displayed proceed to step 2.

FEATURES:

DCF-77 Radio controlled time with manual setting options

Time reception ON/OFF

12/24 hour display

Hour and minute display, seconds indicated by flashing dot

Time zone option ±12hours

Date and month calendar display

Weather forecasting with 3 weather icons and weather tendency indicator

Weather forecasting icon sensitivity setting

Temperature display in degrees Celsius (°C) or Fahrenheit (°F) selectable

Indoor and outdoor temperature display with MIN/MAX recording

Indoor humidity reading displayed as RH% with MIN/MAX recordings

All MIN/MAX temperature recordings show date and time received

All MIN/MAX recordings can be reset

Indoor comfort level indicator - happy or sad face icons

Can take up to three outdoor transmitters

LCD contrast setting

Low battery indicator

Wall mounting or table standing

THE OUTDOOR TRANSMITTER

Holder

Remote transmission of outdoor temperature to weather station by 433 MHz

signal

Wall mounting case

Hanging Hole

LCD Display

2. Within 3 minutes of activating the Weather station, place the batteries into

the transmitter (see “How to install and replace batteries in the

Temperature Transmitter” below).

3. After a few seconds of inserting the batteries into the transmitter, the

Weather Station will start receiving data from the transmitter. The remote

temperature will then be displayed on the Weather Station. If this does not

happen after 15 minutes, the batteries will need to be removed from both

units and reset from step 1.

4. The Weather Station can take up to 3 remote transmitters. If you have

purchased additional transmitters, follow step 2 for all extra transmitters.

However, ensure that you leave 10 seconds in between the reception of

the last transmitter and the set-up of the following transmitter. The Weather

Station will number the transmitters in the order of set-up, i.e. the first

transmitter will have the temperature displayed with the number 1 against it

and so on.

5. When all the transmitters are set up, there is a testing period, during which

the display switches quickly between all the received transmitters at

random, according to which random transmission it receives. Pressing any

key will stop this process. The process also stops automatically if no keys

are pressed for a few minutes.

6. Once the remote temperature has been received and is displayed on the

Weather Station, the DCF-77 time code reception is automatically started.

This takes typically between 3 - 5 minutes in good conditions. This time

period is an excellent opportunity to locate the transmitter(s) in suitable

location(s) outdoors. In order to ensure sufficient 433 MHz transmission

however, this should under good conditions be no more than 25 meters

from where the Weather Station will be finally positioned (see notes on

“Positioning” and “433 MHz Reception”).

Detachable

Stand

Function

Keys Battery Cover

7. If after 10 minutes the DCF time has not been received, use the SET key to

manually enter a time initially. The clock will automatically attempt to

receive the DCF time at each full hour. When this is successful, the

received time will override the manually set time. The date is also updated

with the received time (Please refer also to notes on “Radio controlled

time” and “Manual time setting”).

HOW TO INSTALL AND REPLACE BATTERIES IN THE WEATHER

STATION

The Weather Station uses 2 x AA, IEC LR6, 1.5V

batteries. When batteries need to be replaced, the

low battery symbol will appear on the LCD. To

install and replace the batteries, please follow the

steps below:

1. Insert finger or other solid object in the space

at the bottom center of the battery

compartment and lift up to remove the cover.

2. Insert batteries observing the correct polarity.

(see marking).

3. Replace compartment cover.

HOW TO INSTALL AND REPLACE BATTERIES IN THE

TEMPERATURE TRANSMITTER

The Temperature Transmitter uses 2 x AAA, IEC, LR3, 1.5V batteries. To install

and replace the batteries, please follow the steps below:

1. Remove the cover.

2. Insert the batteries, observing the

correct polarity (see marking).

3. Replace the battery cover on the unit.

Note:

In the event of changing batteries in any of the units, all units need to be reset by

following the setting up procedures. This is because a random security code is

assigned by the transmitter at start-up and this code must be received and stored

by the Weather Station in the first three minutes of power being supplied to it.

BATTERY CHANGE:

It is recommended to replace the batteries in all units on an annual basis to

ensure optimum accuracy of these units.

Please participate in the preservation of the environment.

Return used batteries to an authorised depot.

FUNCTION KEYS:

WEATHER STATION:

The weather station has four easy to use function keys.

Indoor Outdoor

Channel

Setting

SET key (Setting)

Used to enter the set mode for the following functions: LCD contrast, Time

zone, Time Reception ON/OFF, 12/24 hour display, Manual time, Year,

Date, °C/°F, and Weather forecasting icon sensitivity settings.

The year can only be displayed in the set mode (not displayed in normal

mode)

IN key (Indoor)

Used to toggle between the current/ minimum / maximum indoor

temperature and humidity

Press for over 3 seconds to reset the indoor maximum and minimum

temperature and humidity records (will reset all records to current level)

Note: the Time/date information is only available for MIN/MAX temperature

data, and will be changed to default time after the reset operation

Change LCD contrast, time zone, Time Reception ON/OFF, 12/24 hour

display, hour, year, month, day, °C/°F and weather forecasting icon

sensitivity units in setting modes

Note: in 24hr time display mode, the day is set by using the IN key. In 12hr

time display mode, the month is set by using the IN key

OUT key (Outdoor)

Used to toggle between the current / minimum / maximum outdoor

temperature

Press for around 3 seconds to reset the outdoor maximum and minimum

temperature records (will reset all temperatures to current level of the

relative transmitter being reset - each transmitter’s data must be reset

separately)

Note: the time/date information of MIN/MAX data will be reset to default

time as well.

Change minute, month, day in setting modes

Note: in 24hr time display mode, the month is set by using the OUT key. In

12hr time display mode, the day is set by using the OUT key

CH key (Channel)

Toggle between the outdoor Temperature Transmitters 1, 2 and 3 (if more

than 1 transmitter is used)

Exit manual setting mode

LCD SCREEN AND SETTING



LCD (flashing)

For better distinctness, the LCD screen is split into 5 sections displaying the

information for time, date, weather forecast, indoors and outdoors.

DCF RADIO CONTROLLED TIME

The time base for the radio controlled time is a Cesium Atomic Clock operated by

the Physikalisch Technische Bundesanstalt Braunschweig which has a time

deviation of less than one second in one million years. The time is coded and

transmitted from Mainflingen near Frankfurt via frequency signal DCF-77 (77.5

kHz) and has a transmitting range of approximately 1,500 km. Your radio-

controlled Weather Station receives this signal and converts it to show the precise

time in summer or wintertime.

The quality of the reception depends greatly on the geographic location. In normal

cases, there should be no reception problems within a 1500km radius of

Frankfurt.

Once the outdoor temperature is displayed on the Weather station, the DCF tower

icon in the clock display will start flashing in the upper left corner. This indicates

that the clock has detected that there is a radio signal present and is trying to

receive it. When the time code is received, the DCF tower becomes permanently

lit and the time will be displayed.

If the tower icon flashes, but does not set the time or the DCF tower does not

appear at all, then please take note of the following:

Recommended distance to any interfering sources like computer monitors or

TV sets is a minimum of 1.5 - 2 metres.

Within ferro-concrete rooms (basements, superstructures), the received signal

is naturally weakened. In extreme cases, please place the unit close to a

window and/ or point its front or back towards the Frankfurt transmitter.

During nighttime, the atmospheric disturbances are usually less severe and

reception is possible in most cases. A single daily reception is adequate to

keep the accuracy deviation below 1 second.

DCF Tower

Icon (for time

reception) Time

Low battery

Indicator icon

Date MANUAL SETTINGS

Month The following manual settings can be changed when pressing the SET key for:

Weather

Forecast

Icon

LCD contrast setting

Time zone setting

Time reception ON/OFF setting

12/24-Hour setting

Manual time setting

Calendar setting

Snooze setting

°C/°F setting

Weather forecasting icon sensitivity setting

LCD CONTRAST SETTING:

The LCD contrast can be set to 8 different levels to suit the users needs (default

LCD contrast setting is LCD 5). To set the desired contrast level:

Pr1. ess the IN key to select the level of contrast desired.

2. Press the SET key to confirm and enter the “Time Zone setting” or exit

the setting mode by pressing the CH key

TIME ZONE SETTING

The time zone default of the Weather Station is 0. To change to another time

zone:

1. Press the SET key after completing the LCD contrast setting in order to

enter the time zone setting (flashing).

2. sing the IN key, set the time zone. The range runs from 0 to +12 and then

runs from -12 back to 0 in consecutive 1 hour intervals.

3. Press the SET key to confirm and enter the “Time Reception ON/OFF

setting” or exit the setting mode by pressing the CH key

Indoor Relative

Humidity %

Comfort Indicator

Icon

Weather

Ten ency d

Icon

Indoor

Temperature

in °C or °F

Outdoor

transmission

signal

Outdoor

Temperature

in °C or °F Outdoor transmitter Identification number

Time Zone (flashing)

Specyfikacje produktu

Marka:	Techno Line
Kategoria:	Stacja pogodowa
Model:	WS7079S

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Techno Line WS7079S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Stacja pogodowa Techno Line

Techno Line WS 6448 Instrukcja

6 Października 2024

Techno Line WS 9245-IT Instrukcja

5 Października 2024

Techno Line WS 7208 Instrukcja

4 Października 2024

Techno Line WS 6762 Instrukcja

4 Października 2024

Techno Line MA12024 Instrukcja

27 Września 2024

Techno Line WS 9611 IT Instrukcja

22 Września 2024

Techno Line MA 10001 Instrukcja

22 Września 2024

Techno Line WS6825 Instrukcja

22 Września 2024

Techno Line WS 9273-IT Instrukcja

22 Września 2024

Techno Line WS 6730 Instrukcja

22 Września 2024

Instrukcje Stacja pogodowa

Najnowsze instrukcje dla Stacja pogodowa

Hyundai WSP 3080 Instrukcja

15 Października 2024

Livoo SL262 Instrukcja

9 Października 2024

Muse M-085 WS Instrukcja

8 Października 2024

La Crosse Technology S77925v3 Instrukcja

8 Października 2024

TFA 30.5045.54 Instrukcja

8 Października 2024

La Crosse Technology V61 Instrukcja

8 Października 2024

Davis DAV-6520 Instrukcja

7 Października 2024

Brandson 304633 Instrukcja

7 Października 2024

Brandson 305385 Instrukcja

7 Października 2024

GlobalTronics WT-440 Instrukcja

6 Października 2024