Instrukcja obsługi Techno Line WS 6720

Techno Line Stacja pogodowa WS 6720

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Techno Line WS 6720 (5 stron) w kategorii Stacja pogodowa. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/5
INSTRUCTION MANUAL OF WS 6720
Wireless Indoor and Outdoor Weather Station
P.1
QUICK START
1. Slide open the battery cover at the back of your wireless thermometer-clock.
2. Insert 2 x AAA batteries into the battery compartment by observing the correct + / - polarity
signs inside the battery compartment.
3. Replace the battery cover. In few seconds the LCD shows the default time, calendar and the
current indoor temperature and it starts to search for outdoor temperature signal.
4. Then insert 2 x AA batteries into the outdoor sensor. The outdoor temperature will be displayed
with “CH1” shown on the lower line of the LCD. Your Thermometer-clock will be synchronized
with outdoor sensor at Channel 1, the outdoor temperature will be display.
Remarks:
Keep in mind that your outdoor sensor has a 30-meter open air transmission with no obstructions.
Actual transmission range will vary depending on what is in the path of the signal. Each obstruction
(roof, walls, floors, ceilings, thick trees, etc.) will effectively cut signal range in half.
TO SET CALENDAR, 12/24 TIME AND TIME
1. Press and hold SET / ALM SET for 2 seconds, time digits change to year “2008 YR” and flash.
Press / to set year.
2. Then press SET / ALM SET once again, month digits flash. Press / button to set month.
3. Then press SET / ALM SET once again, date digits flash. Press / button to set date.
4. Press SET / ALM SET once again, time digits change “24 Hr”, press / to select “12 Hr”
time format or “24 Hr” time format. When “12 Hr” is selected, AM / PM icon will be displayed.
5. Then press SET / ALM SET once again, time digits changes to “00”, press to select your /
time zone.
6. Then press SET / ALM SET once again, time digits “0:00” show up and the hour digits flash.
Press / to set the hours.
7. Then press SET / ALM SET once again, minute digits flash. Press / button to set the
minutes.
8. Press SET / ALM SET to return to normal mode, or it will return to normal mode in around 7
seconds if no press of any other buttons.
TO SET ALARM TIME
Press SET / ALM SET once, time digits change to alarm time digits “AM 7:00 AL”. Then press and
hold SET / ALM SET for 2 seconds, the hour digits flash. Press / to set your desired hours of
alarm time.
Press SET / ALM SET again, alarm minute digits flash. Press / to set alarm minutes.
Press SET / ALM SET again, time digits change to “05” and flash. Press / to set the snooze
duration from 1 to 20 minutes.
Press SET / ALM SET to return to normal mode, or it will return to normal mode in around 8 seconds if
no further press of any other buttons.
TO TURN ON OR OFF YOUR ALARM
Press SET / ALM SET once to display the alarm time. When alarm time is displayed, press to turn
on / off the daily alarm. When the alarm function is turned on, the icon appears between the hour
and minute digits.
TO USE SNOOZE ALARM
When time reaches your set alarm time, your clock will give beep sound to wake you up. The
icon will flash.
P.2
1. Press SNOOZE once to stop the alarm temporarily, the icon keeps flashing. The alarm will
beep again in 5 minutes.
2. To stop the alarm, press / CHANNEL (ALM On-Off) once, the alarm beep will stop and the
icon become static, alarm will beep again same time next day.
Alarm Duration : 2 minutes
TO DISPLAY TEMPERATURE IN DEGREE °C OR °F
Simply press (°C/°F) to display temperature in degree C or degree F.
To Read the Maximum-Minimum Temperature Records
Press MAX/MIN once to view the indoor-outdoor maximum or minimum temperatures.
When the maximum indoor-outdoor temperatures are displayed, press and hold the MAX will clear the
maximums and the unit will start to record and display fresh data again.
When the minimum indoor-outdoor temperature and humidity are displayed, press and hold the MIN
will clear the minimums and the unit will start to record and display fresh data again.
TO USE THE WEATHER FORECASTER
There are four types of weather display in your weather station :
SUNNY
SUNNY AND CLOUDY
CLOUDY
RAINY
Remarks: for better use of your weather station, place it at a location with open air circulation e.g.
close by an open window. Placing it at air-conditioned environment will affect its accuracy.
P.3

Specyfikacje produktu

Marka: Techno Line
Kategoria: Stacja pogodowa
Model: WS 6720

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Techno Line WS 6720, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Stacja pogodowa Techno Line

Techno Line

Techno Line WS 9632 Instrukcja

4 Stycznia 2025
Techno Line

Techno Line WS 9620 Instrukcja

27 Grudnia 2024
Techno Line

Techno Line WS 9310 Instrukcja

27 Grudnia 2024
Techno Line

Techno Line WS 9135 Instrukcja

27 Grudnia 2024
Techno Line

Techno Line WS 6870 Instrukcja

27 Grudnia 2024
Techno Line

Techno Line WS 9450 Instrukcja

27 Grudnia 2024
Techno Line

Techno Line WS 9257 Instrukcja

27 Grudnia 2024
Techno Line

Techno Line WS 9125 Instrukcja

27 Grudnia 2024
Techno Line

Techno Line WS 9060 Instrukcja

27 Grudnia 2024
Techno Line

Techno Line MA 10920 Instrukcja

27 Grudnia 2024

Instrukcje Stacja pogodowa

Najnowsze instrukcje dla Stacja pogodowa

Ascot

Ascot GT-WS-07s Instrukcja

15 Stycznia 2025
Ventus

Ventus K0382 Instrukcja

14 Stycznia 2025
TFA

TFA 20.1082.17 Instrukcja

12 Stycznia 2025
Oregon Scientific

Oregon Scientific BAR310HG Instrukcja

12 Stycznia 2025
Auriol

Auriol AHFL 433 B2 Instrukcja

12 Stycznia 2025
Oregon Scientific

Oregon Scientific BAR 898 Instrukcja

11 Stycznia 2025
Davis

Davis Weatherlink Touch Console Instrukcja

11 Stycznia 2025
Taylor

Taylor 5156 Instrukcja

8 Stycznia 2025
La Crosse Technology

La Crosse Technology M71633 Instrukcja

8 Stycznia 2025
La Crosse Technology

La Crosse Technology V41CA Instrukcja

8 Stycznia 2025