Instrukcja obsługi Technics SB-T200


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Technics SB-T200 (124 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/124
Contents
SAFETY PRECAUTIONS 2 ..........................................
Accessories 5 ...............................................................
Indicators 5 ...................................................................
Controls and indicators 6 ..............................................
System preparation 9 ...................................................
Placing the sound bar 10 ..............................................
Sound bar connections to TVs.................................12
Basic operations 14 ......................................................
Listening to Bluetooth enabled devices 17 ...................
Troubleshooting .......................................................20
Specifications 22 ..........................................................
English
Français
Espanõl
Italiano
Deutsch
Soundbar System
Instruction Manual
SBT-200
Thank you for purchasing an Onkyo product. Please read this manual thoroughly before
making connections and plugging in your new Onkyo product.
Following the instructions in this manual will enable you to obtain optimum performance and
listening enjoyment from your new product.
Please retain this manual for future reference.
* T I N S Z B 7 5 2 A W Z Z *
En-2
SAFETY PRECAUTIONS
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).
NO USER-SERVICEABLE
PARTS INSIDE. REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the presence
of uninsulated dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the appliance.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufacturers
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specified
by the manufacturer.
S3125A
PORTABLE CART WARNING
12. Use only with the
cart, stand, tripod,
bracket, or table
specified by the
manufacturer,
or sold with the
apparatus. When
a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
15. Damage Requiring Service
Unplug the apparatus from the wall outlet
and refer servicing to qualified service
personnel under the following conditions:
A. When the power-supply cord or plug is
damaged,
B. If liquid has been spilled, or objects have
fallen into the apparatus,
C. If the apparatus has been exposed to rain
or water,
D. If the apparatus does not operate
normally by following the operating
instructions. Adjust only those controls
that are covered by the operating
instructions as an improper adjustment
of other controls may result in damage
and will often require extensive work
by a qualified technician to restore the
apparatus to its normal operation,
E. If the apparatus has been dropped or
damaged in any way, and
F. When the apparatus exhibits a distinct
change in performance this indicates a
need for service.
16. Object and Liquid Entry
Never push objects of any kind into the
apparatus through openings as they may
touch dangerous voltage points or short-
En-3
out parts that could result in a fire or electric
shock. The apparatus shall not be exposed to
dripping or splashing and no objects filled
with liquids, such as vases shall be placed
on the apparatus. Dont put candles or other
burning objects on top of this unit.
17. Batteries
Always consider the environmental issues
and follow local regulations when disposing
of batteries.
18. If you install the apparatus in a built-in
installation, such as a bookcase or rack,
ensure that there is adequate ventilation.
Leave 20 cm (8”) of free space at the top and
sides and 10 cm (4”) at the rear. The rear edge
of the shelf or board above the apparatus
shall be set 10 cm (4”) away from the rear
panel or wall, creating a flue-like gap for
warm air to escape.
Precautions
General
• Please ensure that the equipment is
positioned in a well-ventilated area and
ensure that there is at least 10cm of free
space along the sides and top of the
equipment.
10 cm 10 cm10 cm
• Use the unit on a firm, level surface free from
vibration.
• Keep the unit away from direct sunlight,
strong magnetic fields, excessive dust,
humidity and electronic/electrical equipment
(home computers, facsimiles, etc.) which
generate electrical noise.
• Do not place anything on top of the unit.
• Do not expose the unit to moisture, to
temperatures higher than 60°C or to
extremely low temperatures.
• If your system does not work properly,
disconnect the AC power cord from the AC
outlet and replug.
• In case of an electrical storm, unplug the unit
for safety.
• Hold the AC power plug by the head when
removing it from the AC outlet, as pulling the
cord can damage internal wires.
• The AC power plug is used as a disconnect
device and shall always remain readily
operable.
•
Do not remove the outer cover, as this
may result in electric shock. Refer internal
service to your Onkyo dealer.
• This unit should only be used within the
range of 5°C - 35°C.
• Onkyo is not responsible for damage due to
improper use. Refer all servicing to a Onkyo
dealer.
Warning:
• The supplied AC/DC adaptor contains
no user serviceable parts. Never remove
covers unless qualified to do so. It contains
dangerous voltages, always remove mains
plug from the main outlet socket before any
service operation or when not in use for a
long period.
• The AC/DC adaptor supplied with the
SBT-200 must not be used with other
equipment.
• Never use an AC/DC adaptor other than the
one specified. Otherwise, problem or serious
hazards may be created.
• The voltage used must be the same as that
specified on this unit. Using this product with
a higher voltage other than that which is
specified is dangerous and may result in a fire
or other type of accident causing damage.
Onkyo will not be held responsible for any
damage resulting from use of this unit with a
voltage other than that which is specified.
Volume control
The sound level at a given volume setting
depends on speaker efficiency, location and
various other factors. It is advisable to avoid
exposure to high volume levels, which occurs
while turning the unit on with the volume control
setting up high, or while continually listening at
high volumes.
For British models
Replacement and mounting of an AC plug on
the power supply cord of this unit should be
performed only by qualified service personnel.
IMPORTANT
The wires in the mains lead are coloured in
accordance with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead
of this apparatus may not correspond with the
En-7
1. DC IN jack
Connect the supplied AC adaptor to this jack.
2. OPTICAL IN (DIGITAL) jack
Connect the supplied optical digital audio
cable to this jack.
3. AUDIO IN (ANALOG) jack
Connect the analog audio cable (not
supplied) to this jack.
Remote controller
7
8
9
10
11
12
13
1
3
4
5
6
2
1. Button
This button sets the sound bar power to “On” or
“Standby”.
2. SURROUND button
This button enables the surround sound function.
3. CINEMA (SOUND MODE) button
This mode is suitable for movie viewing.
4. MUSIC (SOUND MODE) button
This mode is suitable for music.
5. NEWS (SOUND MODE) button
This mode is suitable for news programs.
6. DIRECT (SOUND MODE) button
This mode provides sound with no processings.
7. INPUT button
This button switches an input source among
OPTICAL IN, Bluetooth, and AUDIO IN.
8. button
This button mutes the volume temporarily. Press it
again to restore the volume.
9. VOLUME +/- buttons
These buttons increase and decrease volume.
10.
Bluetooth PAIRING button
This button pairs the sound bar with Bluetooth
enabled devices.
11.
Bluetooth Skip Up button
This button selects the next song. Hold down it to
fast-forward.
12.
Bluetooth Play/Pause button
Press this button to play or pause Bluetooth enabled
devices.
13.
Bluetooth Skip Down button
This button selects the beginning of the current song.
Hold down it to fast-reverse.
En-12
Sound bar connections to TVs
Unplug all other equipment before making any connections.
Note
•฀To connect to TV, use OPTICAL IN (DIGITAL) jack or AUDIO IN (ANALOG) jack located at the rear of
the sound bar.
•฀Refer to the instruction manual of the equipment to be connected.
•฀Fully insert the plugs to avoid fuzzy noises.
•฀When you use the RCA audio output terminal connection from a TV/DVD/Blu-ray Disc player, in some
cases, a small background noises may emit from the sound bar depending on the brand, model or
age of the equipment, and it is not a quality matter from the sound bar.
•฀If the volume is continuously at low level, the sound bar will be automatically turned off.
Connecting a TV, or DVD player, etc.
If the TV/monitor has an audio output, connect it to the OPTICAL IN (DIGITAL) jack or the AUDIO IN
(ANALOG) jack at the rear of the sound bar.
Optical digital
audio cable
Analog audio cable
(not supplied)
To AUDIO IN (ANALOG) jack
To OPTICAL IN (DIGITAL) jack
Audio signal
To digital audio
output terminal
To audio output terminals
TV
or
Blu-ray/DVD player/
Digital tuner
Rear panel of sound bar
Cap
Remove the cap of the optical digital
audio cable before connecting.
Choose an audio
connection that matches
your TV, and then make the
connection.
En-21
Remote controller
Symptom Possible cause
Page
The remote controller
does not operate
properly.
• Is the battery polarity correct?
• Is the battery dead?
• Is the distance or angle correct?
• Is there any obstacle in front of the sound bar?
• Is there a strong light (inverter-type fluorescent lights or direct
sunshine) shining on the remote sensor?
P.8
• Is the remote controller for another equipment used
simultaneously? -
The sound bar cannot
be turned on with the
remote controller.
• Is the AC power cord of the sound bar plugged in? P.13
• Is the battery inserted? P.8
Error indicators and warnings
When you fail to perform operations properly, /INPUT indicator flashes in green.
Display Meaning
/INPUT indicator (Flashes in green)
The protection circuit is activated.
When the same message appears even if the sound bar is unplugged and plugged in or is set to the
standby mode and on again, contact your local dealer where you purchased the sound bar.
Trademarks and Licensing
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by Onkyo is under license. Other trademarks and trade names are those of
their respective owners.


Specyfikacje produktu

Marka: Technics
Kategoria: głośnik
Model: SB-T200

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Technics SB-T200, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik Technics

Instrukcje głośnik

Najnowsze instrukcje dla głośnik