Instrukcja obsługi Technical Pro MM2000BT

Technical Pro system hi-fi MM2000BT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Technical Pro MM2000BT (10 stron) w kategorii system hi-fi. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/10
Technical Pro
User Manual for:
MM2000BT
Professional Karaoke Amplifier
with USB & SD Card & Bluetooth Inputs
Congratulations and thank you for your purchase of this Technical Pro professional karaoke
amplifier, the MM2000BT. To get the most from
your MM2000BT
,
it is recommended that you review all of the information provided in this instruction manual before operating this equipment.
If you've spent any time at all in professional audio, you know the name Technical Pro and what it stands for — incredible performance &
sound, and the ultimate in reliability under harsh conditions. And now, Technical Pro offers the same technology in a series of karaoke amplifier
bringing more of what sets Technical Pro apart from all others.
1- Read these instructions thoroughly before using this item.
2- Keep these instructions for future reference.
3- Heed all warnings.
4- Follow all instructions.
5- WARNING: To prevent fire or electric shock, do not expose this equipment to rain or moisture. Do not store or operate this
product near any liquids.
6- Clean only with a dry cloth.
7- Do not store or operate this product near any heat sources such as radiators, heat registers, stoves, or other apparatuses
(including amplifiers) that produce heat.
8- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding plug has two blades and a round grounding prong. The wide blade or third prong is provided for your safety.
If the provided plug does not fit your outlet, consult an electrician for the replacement of the obsolete outlet.
9- Protect the all wires connected to this unit from being walked on or pinched, particularly plugs and the point where they exit from
the unit. When removing the cord from the power outlet, remove it by holding the plug not by pulling the cord.
10- Unplug the unit during lightning storms or when unused for long periods of time.
11- When wiring this unit and all other equipment used in connection to this unit make sure that all of your equipment is turned OFF.
12- Once installation and wiring is complete power on all your equipment with the volume and level controls turned DOWN. Once
all the equipment is ON slowly raise the volume or level controls to their proper positions.
13- When grounding this unit, be sure to do so correctly, so as not to defeat the built-in grounding in this unit.
14- Before placing, installing, rigging, or suspending any product, inspect all hardware, suspension, cabinets, transducers,brackets
and associated equipment for damage. Any missing, corroded, deformed, or non-load rated component could significantly reduce
the strength of the installation, placement or array. Any such condition severely reduces the safety of the installation and should be
immediately corrected. Use only hardware which is rated for the loading conditions of the installation and any possible short-term,
unexpected overloading. Never exceed the rating of the hardware or equipment.
15- Consult a licensed, Professional Engineer regarding physical equipment installation. Ensure that all local, state and national
regulations regarding the safety and operation of equipment are understood and adhered to.
16- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
WARNING!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OF THIS UNIT. THERE
ARE NOUSER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence
of "dangerous" voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to humans. Users should exhibit extra safety when this symbol appears in this instruction manual and
follow all precautions as they are stated.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in this manual.
Introduction
MM2000BT
MM2000BT Front Panel
1.Power Button: Press this button to power the unit on and off.
2.MP3(1/8”) Input: Connect your MP3 player or computer here.Make sure to press the input selector button (7) until
“MP3” appears on the display screen to play the signal from the MP3 player or computer.
3.Line Volume: Turn this knob to adjust the volume of music.
4.Dual Ten Band Equalizers: Use the sliders to increase or decrease the signal strength of the respective frequencies.
The equalization points are 32Hz, 64Hz,125Hz, 250Hz, 500Hz,1KHz, 2KHz, 4KHz, 8KHz and 16KHz.
5.XLR Microphone Inputs (Balanced): Connect balanced microphone to these inputs.
6.Microphone Volume:Use this knob to adjust the volume of the microphones.
7.Input Selector: Use this button to switch between all the inputs.
8.Recording from the AUX / MP3 / DVD and Microphone Inputs:
HOW TO MAKE A RECORDING
When the input selected is MP3/AUX/DVD and there is an USB flash drive or SD card (with blank space on it)
inserted into their respective slot, pressing and holding this button will activate the recording function. Press this
button and hold for several seconds and the word “REC” will display on the screen. The unit will create a new file in
the connected USB flash drive or SD card and get ready to make a recording. At this point there is no actual
recording yet. Press the button again and the unit will start recording onto the USB flash drive or SD Card and the
elapsed time and “REC” will display on the screen. Press the button a third time to pause the recording and the
word “REC” and the elapsed time displayed on the screen will start flashing. Press again to continue the recording.
Press and hold this button for several seconds to save the file and end the recording and exit. If both USB flash
drive and SD card are connected, the unit will begin recording onto the USB flash drive. If the USB flash drive is full,
remove it and then press the record button again to start another recording. The unit will also be able to record the
signal from microphones onto the USB flash drive or SD Card. When the recording function is activated and there is
a microphone connected to the unit, the unit will mix the signal from MP3 or AUX inputs with the microphone into
one track. If two microphones are connected and turned on, both microphone signals will be recorded and mixed
into one track with the signal from MP3, AUX or DVD inputs.
THERE IS NO RECORDING FUNCTION WHEN INPUT SELECTED IS USB/SD, BLUETOOTH OR FM TUNER.
THE RECORDING FILE FORMAT IS .mp3.
9. Next Track / Fast Forward / Next Preset Station Button:
When playing from the USB/SD/Bluetooth inputs: Press this button to go to the beginning of the next track on either the
USB flash drive, SD Card or Bluetooth input. Press this button and hold for several seconds to fast forward. The unit will
keep fast forwarding until this button is released. This function only works for USB flash drive or SD Card signal.
When playing from the Tuner input: Press this button to go to the next station stored station.
10.Previous Track / Fast Rewind / Previous Preset Station Button:
When playing from the USB/SD/Bluetooth inputs: Press this button to go to the beginning of the previous track on either the USB
flash drive, SD Card or Bluetooth input. Press this button and hold for several seconds to fast rewind.
The unit will keep fast
rewinding until this button is released. This function only works for USB flash drive or SD Card signal.
When playing from the Tuner input: Press this button to go to the previous station stored station.
MM2000BT
29 30
25 26
24 2827 31 32 33 34 35 36 37 38 391514 1716 1918 2120 23
22
123
12 11 10 9 8 7 6 5
13 4

Specyfikacje produktu

Marka: Technical Pro
Kategoria: system hi-fi
Model: MM2000BT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Technical Pro MM2000BT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje system hi-fi Technical Pro

Technical Pro

Technical Pro MM2000BT Instrukcja

5 Października 2024
Technical Pro

Technical Pro BLUEDECK2 Instrukcja

5 Października 2024

Instrukcje system hi-fi

Najnowsze instrukcje dla system hi-fi

AKAI

AKAI EIE Pro Instrukcja

13 Października 2024
Sharp

Sharp XL-540H Instrukcja

11 Października 2024
Kenwood

Kenwood M-9000S Instrukcja

10 Października 2024
GoGen

GoGen MSC 472 BTDAB Instrukcja

9 Października 2024
Morel

Morel SUB-10X Instrukcja

9 Października 2024
Morel

Morel USUB 803 Instrukcja

9 Października 2024
Morel

Morel Soundsub PSW8e-w Instrukcja

9 Października 2024
Morel

Morel Sopran 934 Instrukcja

9 Października 2024
NAD

NAD M10 V3 Instrukcja

9 Października 2024
NUVO

NUVO NV-MPS4-E Instrukcja

8 Października 2024