Instrukcja obsล‚ugi TDE Instruments Digalox DPM72-MPP-DIN

TDE Instruments nieskategoryzowany Digalox DPM72-MPP-DIN

Przeczytaj poniลผej ๐Ÿ“– instrukcjฤ™ obsล‚ugi w jฤ™zyku polskim dla TDE Instruments Digalox DPM72-MPP-DIN (8 stron) w kategorii nieskategoryzowany. Ta instrukcja byล‚a pomocna dla 9 osรณb i zostaล‚a oceniona przez 2 uลผytkownikรณw na ล›rednio 4.5 gwiazdek

Strona 1/8
Digaloxยฎ DPM72-MPP/MPPA/MPPV-DIN
Instruction manual (Rev-2021-05)
๎˜๎˜‚๎˜ƒ๎˜„๎˜…๎˜†๎˜‡๎˜ˆ๎˜‰๎˜Š๎˜‹๎˜†๎˜‚๎˜ƒ๎˜„๎˜‰๎˜Œ๎˜ˆ๎˜ƒ๎˜Š๎˜‡๎˜๎˜‹๎˜‚๎˜†๎˜‰๎˜‹๎˜‚๎˜Š๎˜Ž๎˜๎˜‡๎˜Œ๎˜ˆ๎˜‚๎˜Ž๎˜‰๎˜๎˜…๎˜๎˜‰๎˜๎˜‘๎˜’๎˜‰๎˜๎˜ƒ๎˜‹๎˜„
Package contents: ๎˜๎˜‹๎˜†๎˜ƒ๎˜„๎˜…๎˜“๎˜”๎˜‰๎˜๎˜•๎˜–๎˜—๎˜˜๎˜™๎˜‰๎˜š๎˜‰๎˜›๎˜‡๎˜Œ๎˜œ๎˜ˆ๎˜๎˜Š๎˜™๎˜‰๎˜˜๎˜‰๎˜‹๎˜‚๎˜Š๎˜Ž๎˜๎˜‡๎˜๎˜Ž๎˜‹๎˜…๎˜‚๎˜‰๎˜Œ๎˜ƒ๎˜‚๎˜‡๎˜ƒ๎˜„๎˜Š๎˜‰๎˜ž๎˜Ÿ๎˜’๎˜‰ ๎˜‰๎˜๎˜Ÿ!
1. Safety instructions
โ€ข"๎˜ˆ๎˜ƒ# ๎˜‰ ๎˜‹๎˜‚๎˜Š๎˜Ž๎˜๎˜‡๎˜๎˜Ž๎˜‹๎˜…๎˜‚ ๎˜‰ ๎˜Œ๎˜ƒ๎˜‚๎˜‡๎˜ƒ๎˜„ ๎˜‰ ๎˜๎˜ƒ๎˜๎˜ˆ๎˜๎˜‡๎˜„๎˜„$ ๎˜‰ %๎˜ˆ๎˜๎˜…๎˜๎˜ˆ ๎˜‰ ๎˜…๎˜œ๎˜ˆ๎˜๎˜ƒ๎˜Ž๎˜‹๎˜‚๎˜† ๎˜‰ ๎˜Ž&๎˜ˆ ๎˜‰ #๎˜ˆ'๎˜‹๎˜๎˜ˆ( ๎˜‰ )๎˜ˆ๎˜ˆ๎˜œ ๎˜‰ ๎˜๎˜…๎˜ ๎˜‰ ๎˜„๎˜ƒ๎˜Ž๎˜ˆ๎˜
๎˜๎˜ˆ๎˜๎˜ˆ๎˜๎˜ˆ๎˜‚๎˜๎˜ˆ*
โ€ข๎˜–๎˜…๎˜‡๎˜‚๎˜Ž๎˜‹๎˜‚๎˜†๎˜‰๎˜ƒ๎˜‚#๎˜‰๎˜‹๎˜‚๎˜Š๎˜Ž๎˜ƒ๎˜„๎˜„๎˜ƒ๎˜Ž๎˜‹๎˜…๎˜‚๎˜‰๎˜Œ๎˜‡๎˜Š๎˜Ž๎˜‰%๎˜ˆ๎˜‰๎˜๎˜ƒ๎˜๎˜๎˜‹๎˜ˆ#๎˜‰๎˜…๎˜‡๎˜Ž๎˜‰%$๎˜‰๎˜Š๎˜‡๎˜‹๎˜Ž๎˜ƒ%๎˜„$๎˜‰+๎˜‡๎˜ƒ๎˜„๎˜‹๎˜๎˜‹๎˜ˆ#๎˜‰๎˜ƒ๎˜‚#๎˜‰๎˜๎˜…๎˜Œ๎˜œ๎˜ˆ๎˜Ž๎˜ˆ๎˜‚๎˜Ž
๎˜œ๎˜ˆ๎˜๎˜Š๎˜…๎˜‚๎˜Š๎˜‰๎˜…๎˜‚๎˜„$*
โ€ขWhen working on the device hazardous voltages must not be connected to
the device! The terminals J1-J12 are not isolated from the measuring
circuit.
โ€ขThe device must not be used as the only protective device or protective
shutdown.
โ€ข,&๎˜ˆ๎˜‰#๎˜ˆ'๎˜‹๎˜๎˜ˆ๎˜‰๎˜‹๎˜Š๎˜‰๎˜‚๎˜…๎˜Ž๎˜‰๎˜‹๎˜‚๎˜Ž๎˜ˆ๎˜‚#๎˜ˆ#๎˜‰๎˜Ž๎˜…๎˜‰๎˜œ๎˜๎˜…๎˜Ž๎˜ˆ๎˜๎˜Ž๎˜‰๎˜œ๎˜ˆ๎˜๎˜Š๎˜…๎˜‚๎˜Š๎˜‰๎˜…๎˜๎˜‰๎˜๎˜ƒ๎˜๎˜‹๎˜„๎˜‹๎˜Ž๎˜‹๎˜ˆ๎˜Š๎˜‰๎˜ƒ๎˜†๎˜ƒ๎˜‹๎˜‚๎˜Š๎˜Ž๎˜‰&๎˜ƒ๎˜๎˜Œ*๎˜‰-๎˜œ๎˜ˆ๎˜๎˜‹๎˜๎˜‹๎˜
#๎˜ˆ'๎˜‹๎˜๎˜ˆ๎˜Š๎˜‰๎˜Œ๎˜‡๎˜Š๎˜Ž๎˜‰ %๎˜ˆ๎˜‰ ๎˜‡๎˜Š๎˜ˆ#๎˜‰ ๎˜Ž๎˜…๎˜‰ ๎˜†๎˜‡๎˜ƒ๎˜๎˜ƒ๎˜‚๎˜Ž๎˜ˆ๎˜ˆ๎˜‰๎˜Š๎˜ƒ๎˜๎˜ˆ๎˜Ž$ ๎˜‰๎˜ž๎˜œ๎˜๎˜…๎˜Ž๎˜ˆ๎˜๎˜Ž๎˜‹๎˜…๎˜‚๎˜‰๎˜๎˜ˆ๎˜„๎˜ƒ$๎˜Š๎˜™๎˜‰ ๎˜๎˜‡๎˜Ž.๎˜…๎˜๎˜๎˜‰๎˜Š/๎˜‹๎˜Ž๎˜&๎˜ˆ๎˜Š๎˜™
๎˜ˆ๎˜Ž๎˜*!*
โ€ข0&๎˜ˆ๎˜‚๎˜‰๎˜๎˜…๎˜‚๎˜‚๎˜ˆ๎˜๎˜Ž๎˜‹๎˜‚๎˜†๎˜‰๎˜Š/๎˜‹๎˜Ž๎˜&๎˜ˆ๎˜Š๎˜‰๎˜Ž๎˜…๎˜‰๎˜Ž&๎˜ˆ๎˜‰๎˜Ž๎˜ˆ๎˜๎˜Œ๎˜‹๎˜‚๎˜ƒ๎˜„๎˜Š๎˜‰12.13๎˜™๎˜‰๎˜…๎˜‚๎˜„$๎˜‰๎˜Š/๎˜‹๎˜Ž๎˜&๎˜ˆ๎˜Š๎˜‰๎˜Œ๎˜‡๎˜Š๎˜Ž๎˜‰%๎˜ˆ๎˜‰๎˜‡๎˜Š๎˜ˆ#
/&๎˜…๎˜Š๎˜ˆ๎˜‰๎˜‹๎˜Š๎˜…๎˜„๎˜ƒ๎˜Ž๎˜‹๎˜…๎˜‚๎˜‰'๎˜…๎˜„๎˜Ž๎˜ƒ๎˜†๎˜ˆ๎˜‰๎˜‹๎˜Š๎˜‰๎˜ƒ๎˜Ž๎˜‰๎˜„๎˜ˆ๎˜ƒ๎˜Š๎˜Ž๎˜‰๎˜Ž/๎˜‹๎˜๎˜ˆ๎˜‰๎˜Ž&๎˜ˆ๎˜‰๎˜Œ๎˜ƒ๎˜“๎˜‹๎˜Œ๎˜‡๎˜Œ๎˜‰๎˜…๎˜๎˜๎˜‡๎˜๎˜๎˜‹๎˜‚๎˜†๎˜‰๎˜Œ๎˜ˆ๎˜ƒ๎˜Š๎˜‡๎˜๎˜ˆ๎˜Œ๎˜ˆ๎˜‚๎˜Ž
'๎˜…๎˜„๎˜Ž๎˜ƒ๎˜†๎˜ˆ*๎˜‰4๎˜…๎˜๎˜‰๎˜ˆ๎˜“๎˜ƒ๎˜Œ๎˜œ๎˜„๎˜ˆ๎˜™๎˜‰/&๎˜ˆ๎˜‚๎˜‰๎˜Œ๎˜ˆ๎˜ƒ๎˜Š๎˜‡๎˜๎˜‹๎˜‚๎˜†๎˜‰5678๎˜‰๎˜9๎˜‰๎˜Š/๎˜‹๎˜Ž๎˜&๎˜ˆ๎˜Š๎˜‰๎˜Œ๎˜‡๎˜Š๎˜Ž๎˜‰%๎˜ˆ๎˜‰๎˜‹๎˜Š๎˜…๎˜„๎˜ƒ๎˜Ž๎˜ˆ#๎˜‰๎˜๎˜…๎˜๎˜‰๎˜ƒ๎˜Ž
๎˜„๎˜ˆ๎˜ƒ๎˜Š๎˜Ž๎˜‰:678*
โ€ข๎˜๎˜…๎˜‰๎˜‚๎˜…๎˜Ž๎˜‰๎˜…๎˜œ๎˜ˆ๎˜‚๎˜‰๎˜Ž&๎˜ˆ๎˜‰&๎˜…๎˜‡๎˜Š๎˜‹๎˜‚๎˜†(
โ€ข๎˜๎˜…๎˜‰๎˜‚๎˜…๎˜Ž๎˜‰๎˜‡๎˜Š๎˜ˆ๎˜‰๎˜Ž&๎˜ˆ๎˜‰#๎˜ˆ'๎˜‹๎˜๎˜ˆ๎˜‰๎˜‹๎˜‚๎˜‰๎˜Ž&๎˜ˆ๎˜‰๎˜œ๎˜๎˜ˆ๎˜Š๎˜ˆ๎˜‚๎˜๎˜ˆ๎˜‰๎˜…๎˜๎˜‰๎˜ˆ๎˜“๎˜œ๎˜„๎˜…๎˜Š๎˜‹'๎˜ˆ๎˜‰๎˜…๎˜๎˜‰๎˜๎˜„๎˜ƒ๎˜Œ๎˜Œ๎˜ƒ%๎˜„๎˜ˆ๎˜‰๎˜Š๎˜‡%๎˜Š๎˜Ž๎˜ƒ๎˜‚๎˜๎˜ˆ๎˜Š(
โ€ข๎˜๎˜„๎˜„๎˜‰๎˜๎˜ƒ%๎˜„๎˜ˆ๎˜Š๎˜‰๎˜๎˜ƒ๎˜๎˜$๎˜‹๎˜‚๎˜†๎˜‰&๎˜ƒ;๎˜ƒ๎˜#๎˜…๎˜‡๎˜Š๎˜‰'๎˜…๎˜„๎˜Ž๎˜ƒ๎˜†๎˜ˆ๎˜Š๎˜‰๎˜Œ๎˜‡๎˜Š๎˜Ž๎˜‰%๎˜ˆ๎˜‰๎˜Š๎˜ˆ๎˜๎˜‡๎˜๎˜ˆ#๎˜‰/๎˜‹๎˜Ž&๎˜‰๎˜ˆ๎˜“๎˜Ž๎˜ˆ๎˜๎˜‚๎˜ƒ๎˜„๎˜‰๎˜Š๎˜ˆ๎˜œ๎˜ƒ๎˜๎˜ƒ๎˜Ž๎˜…๎˜๎˜Š*
2. Meaning of symbols
<๎˜ˆ๎˜‚๎˜ˆ๎˜๎˜ƒ๎˜„๎˜‰/๎˜ƒ๎˜๎˜‚๎˜‹๎˜‚๎˜†๎˜‰๎˜Š๎˜‹๎˜†๎˜‚
๎˜ž๎˜๎˜Ž๎˜Ž๎˜ˆ๎˜‚๎˜Ž๎˜‹๎˜…๎˜‚๎˜™๎˜‰๎˜…%๎˜Š๎˜ˆ๎˜'๎˜ˆ๎˜‰๎˜Ž&๎˜ˆ๎˜‰#๎˜…๎˜๎˜‡๎˜Œ๎˜ˆ๎˜‚๎˜Ž๎˜ƒ๎˜Ž๎˜‹๎˜…๎˜‚(!
0๎˜ƒ๎˜๎˜‚๎˜‹๎˜‚๎˜†๎˜‰๎˜…๎˜๎˜‰๎˜ƒ๎˜‚๎˜‰๎˜ˆ๎˜„๎˜ˆ๎˜๎˜Ž๎˜๎˜‹๎˜๎˜ƒ๎˜„๎˜‰&๎˜ƒ;๎˜ƒ๎˜#
..... ..... 1 / 8
3. Intended use
โ€ขMeasurement of current, voltage, power and frequency in the specified measuring
ranges.
โ€ขIndoor use non condensing, non corrosive.
โ€ขMounting on DIN rail or screwing on.
โ€ขFailure to comply with these instructions will void all guarantee and warranty.
4. Description
Depending on type the measurement modes analogue signal (2ร—) 0/2 to 10 V and/or
(2ร—) 0/4 to 20 mA AC/DC are supported. As individually adjustable threshold values
are reached, two galvanically isolated alarm outputs enable the device to perform
switch-on or switch-off operations.
Using the configuration software โ€œDigalox
ยฎ Managerโ€ the device can be configured,
e.g. thresholds for alarm output, hysteresis, and more.
Depending on the model, measured values can be transmitted via XBEE radio
technology or RS485 Modbus interface. In addition, the device features a counting
function with data retention. This enables operating-hours-counters or time-counters
for exceeding and falling below threshold values, as well as single pulse counting
(MPP) or double pulse counting (MPPV). The device can be mounted on DIN rails
as well as on other backgrounds through corresponding holes in the housing.
Visit to download the software โ€œDigaloxwww.digalox.com ยฎ Managerโ€.
----- ----- 2 / 8
5. Product overview
3
2
5
4
1
1 2 optocoupler switch outputs
2 Jumper pins J1โ€“J12
3 Supply voltage input
4 Interface (XBEE / RS485)
5 Measurement inputs
6. Mounting
Hook the device into the top-hat rail from above and then press it at the bottom until
the latch engages.
Alternatively, attach the device with 4 screws.
----- ----- 3 / 8


Specyfikacje produktu

Marka: TDE Instruments
Kategoria: nieskategoryzowany
Model: Digalox DPM72-MPP-DIN

Potrzebujesz pomocy?

Jeล›li potrzebujesz pomocy z TDE Instruments Digalox DPM72-MPP-DIN, zadaj pytanie poniลผej, a inni uลผytkownicy Ci odpowiedzฤ…




Instrukcje nieskategoryzowany TDE Instruments

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Paลบdziernika 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Paลบdziernika 2024
Emko

Emko EZM-9920 Instrukcja

27 Paลบdziernika 2024
Emko

Emko ESM-3712-H Instrukcja

27 Paลบdziernika 2024
Emko

Emko ATS-10 Instrukcja

27 Paลบdziernika 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Paลบdziernika 2024
Emko

Emko EPM-3790 Instrukcja

27 Paลบdziernika 2024
Emko

Emko EPM-7790 Instrukcja

27 Paลบdziernika 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Paลบdziernika 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Paลบdziernika 2024