Instrukcja obsługi Tandberg Data RDX QuikStation 4
Tandberg Data
Disk array
RDX QuikStation 4
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tandberg Data RDX QuikStation 4 (117 stron) w kategorii Disk array. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/117
Product Manual
For QuikStation® 4 and QuikStation 8 Appliances
December 2017
1021970 Rev. C
RDX QuikStation 4 and 8 Product Manual
1021970 Rev. C ©2017 Overland Storage, Inc. 2
Sphere 3D Corp.
9112 Spectrum Center Boulevard
San Diego, CA 92123 USA
TEL 1.800.729.8725
1.858.571.5555
FAX 1.858.571.3664
www.sphere3d.com
©2017 Overland Storage, Inc. All rights reserved.
Overland®, Overland Storage®, ARCvault®, DynamicRAID®, GuardianOS®, NEO®, NEO Series®, PowerLoader®, Protection OS®, RAINcloud®, REO®, REO
4000®, REO Series®, Snap Appliance
®, Snap Care® (EU only), SnapSAN®, SnapScale®, SnapScale X2®, SnapServer®, StorAssure®, Ultamus®, VR2®, and
XchangeNOW® are registered trademarks of Overland Storage, Inc.
Tandberg Data ®
, AccuGuard®, AccuVault®, DPS1000 Series®, DPS1100®, DPS1200®, DPS2000
®, Magnum®, QuikStation®, QuikStor®, RDX®, RDXPRO®,
StorageLibrary®
, StorageLoader®, Tandberg SecureService®
, Tandberg StorageLibrary®, and VXA® are registered trademarks of Tandberg Data, Inc.
Desktop Cloud Orchestrator® and V3® are registered trademarks of Sphere 3D Corp.
Campus Cluster™, NEO Agility™, RapidRebuild™, Snap ECR™, Snap Encrypted Continuous Replication™, SnapExpansion XSR™, SnapScale X4™,
SnapServer DX Series™, SnapServer XSD Series™, SnapServer XSD40™, SnapServer XSR Series™, SnapServer XSR40™, SnapServer XSR120™,
SnapServer Manager™, SnapStorage Manager™, and SnapSync™ are trademarks of Overland Storage, Inc.
BizNAS™, QuadPak™, and RDX+™ are trademarks of Tandberg Data, Inc.
G-Series™, Glassware 2.0™, and SnapCLOUD™ are trademarks of Sphere 3D Corp.
All other brand names or trademarks are the property of their respective owners.
The names of companies and individuals used in examples are fictitious and intended to illustrate the use of the software. Any resemblance to actual
companies or individuals, whether past or present, is coincidental.
PROPRIETARY NOTICE
All information contained in or disclosed by this document is considered proprietary by Sphere 3D Corp. By accepting this material the recipient agrees that
this material and the information contained therein are held in confidence and in trust and will not be used, reproduced in whole or in part, nor its contents
revealed to others, except to meet the purpose for which it was delivered. It is understood that no right is conveyed to reproduce or have reproduced any item
herein disclosed without express permission from Sphere 3D Corp.
Sphere 3D Corp. provides this manual as is, without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties
of merchantability and fitness for a particular purpose. Sphere 3D Corp. may make improvements or changes in the product(s) or programs described in this
manual at any time. These changes will be incorporated in new editions of this publication.
Sphere 3D Corp. assumes no responsibility for the accuracy, completeness, sufficiency, or usefulness of this manual, nor for any problem that might arise from
the use of the information in this manual.
FW 01.003.05
REVISION HISTORY
Revision DescriptionDate
A June 2016 Initial release
B June 2017 Minor fixes and updates
C December 2017 Minor fixes including static IP configuration
1021970 Rev. C ©2017 Overland Storage, Inc. 3
Preface
Audience and Purpose
This guide describes how to install and operate an RDX QuikStation appliance and is intended
for use by anyone deploying the RDX QuikStation 4 or the RDX QuikStation 8 into their
network environment. Familiarity with system and network configuration is highly
recommended.
The information in this guide applies to both the RDX QuikStation 4 and the RDX
QuikStation 8. When there is a significant operational difference, then either the RDX
QuikStation 4 or RDX QuikStation 8 is specified.
Organization
The following chapters are included in this guide:
Overview
•Chapter 1, “Product Overview,” provides an overview of the features and components of
the RDX QuikStation.
Installation and Setup
•Chapter 2, “Initial Setup and Configuration,” describes information on how to rack-
mount, connect, and initially configure the RDX QuikStation.
•Chapter 3, “iSCSI Configuration,” describes how to connect host computers to RDX
QuikStation iSCSI targets, including how to set up iSCSI security.
Using the RDX Remote Management Console
•Chapter 4, “System Configuration,” describes RDX QuikStation system configuration
tasks, such as network configuration and user account management.
•Chapter 5, “Logical Device Management,” provides information about the logical device
interface in the Remote Management Console.
•Chapter 6, “Manage Tape Library Configurations,” shows how to do additional
configuration tasks from the interface.Logical Device
•Chapter 7, “Physical Device Management,” provides information about the physical
device interface in the Remote Management Console, including ejecting RDX media and
reformatting and cloning data.
•Chapter 8, “System Maintenance,” describes RDX QuikStation system maintenance
tasks, such as importing and exporting configuration files and updating firmware.
Specyfikacje produktu
| Marka: | Tandberg Data |
| Kategoria: | Disk array |
| Model: | RDX QuikStation 4 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Tandberg Data RDX QuikStation 4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Disk array Tandberg Data
5 Września 2024
23 Sierpnia 2024
Instrukcje Disk array
- Disk array Icy Box
- Disk array Synology
- Disk array Dell
- Disk array Netgear
- Disk array Seagate
- Disk array AIC
Najnowsze instrukcje dla Disk array
7 Września 2024
6 Września 2024
3 Września 2024
3 Września 2024
27 Sierpnia 2024
9 Sierpnia 2024
6 Lipca 2024
5 Lipca 2024
4 Lipca 2024