Instrukcja obsługi Tams Elektronik FI-1
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tams Elektronik FI-1 (16 stron) w kategorii modelarstwo. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/16
FI-1
Function inverter
for vehicle decoders
Manual
FI-1
Item number 70-02001-02
FI-Set
Item number 70-02000-02
t ms elektronika
n n n
FI-1 | Function inverter t ms elektronika
Contents
1. Getting started.............................................................................................................3
1.1. Contents of the package.......................................................................................3
1.2. Required accessories............................................................................................3
For mounting and connecting you need:................................................................3
1.3. Intended use.......................................................................................................3
1.4. Safety instructions................................................................................................4
2. Operation overview.......................................................................................................5
3. Connections.................................................................................................................6
3.1. Safety instructions................................................................................................6
3.2. Safe and correct soldering....................................................................................7
3.3. Connection assignment.........................................................................................8
3.4. Connecting the LEDs............................................................................................9
3.5. Fixing the module.................................................................................................9
4. Checklist for troubleshooting and error correction.........................................................10
4.1. Technical Hotline................................................................................................10
4.2. Repairs..............................................................................................................10
5. Technical data............................................................................................................12
6. Warranty, EU conformity & WEEE................................................................................13
6.1. Guarantee bond.................................................................................................13
6.2. EU Declaration of Conformity..............................................................................14
6.3. Declarations on the WEEE Directive.....................................................................14
Version 2.0 | Status: 02/2024
© Tams Elektronik GmbH
All rights reserved, in particular the right of reproduction, distribution and translation. Copies,
reproductions and alterations in any form require the written permission of Tams Elektronik
GmbH. We reserve the right to make technical changes.
Printing the manual
The formatting is optimised for double-sided printing. The standard page size is DIN A5. If
you prefer a larger display, printing on DIN A4 is recommended.
2 | Contents
t ms elektronik FI-1 | Function invertera
1. Getting started
The instructions will help you step by step with the safe and proper installation and use of
your function inverter. Before you start to put the function inverter into operation, read this
manual completely, especially the safety instructions and the section on possible errors and
their elimination. You will then know what you have to pay attention to and thus avoid errors
that sometimes can only be rectified with a lot of effort.
Keep the instructions in a safe place so that you can restore functionality later in the event of
any malfunctions. If you pass the function inverter on to another person, also give the
instructions with it.
1.1. Contents of the package
FI-Set
(70-02000-02)
FI-1
(70-02001-02)
Function inverters FI-1 2 2
Red-yellow dual LEDs 4 ---
Yellow LEDs 2 ---
Resistors 6 ---(1,5 kOhm)
1.2. Required accessories
For mounting and connecting you need:
a soldering iron with temperature control and a thin tip and a deposit stand or a controlled
soldering station
a scraper, rag or sponge
a heat-resistant pad
a small pair of side cutters and wire strippers
tweezers and flat-nose pliers if necessary
electronic solder (preferably 0.5 to 0.8 mm diameter)
Stranded wires. If possible, use thin, flexible or highly flexible stranded wires that consist of
several thin individual wires and can be easily laid in the vehicle.
Recommended cross-sections: > 0,04 mm²
1.3. Intended use
The function inverter is intended for use in model construction, especially in model railway
layouts, according to the specifications in the manual. Any other use is not in accordance with
the intended use and will result in the loss of the warranty claim. Intended use also includes
reading, understanding and following all parts of the instructions. The function inverter is not
intended to be used by children under the age of 14.
Getting started | 3
Specyfikacje produktu
| Marka: | Tams Elektronik |
| Kategoria: | modelarstwo |
| Model: | FI-1 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Tams Elektronik FI-1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje modelarstwo Tams Elektronik
1 Stycznia 2025
23 Maja 2024
Instrukcje modelarstwo
- modelarstwo Lego
- modelarstwo Voltcraft
- modelarstwo Revell
- modelarstwo Viessmann
- modelarstwo Absima
- modelarstwo Trix
- modelarstwo Marklin
- modelarstwo SAB Heli Division
- modelarstwo Massoth
Najnowsze instrukcje dla modelarstwo
11 Stycznia 2025
8 Stycznia 2025
26 Grudnia 2024
17 Grudnia 2024
13 Grudnia 2024
11 Grudnia 2024
11 Grudnia 2024
11 Grudnia 2024
11 Grudnia 2024
11 Grudnia 2024