Instrukcja obsługi T-Rex Striker

T-Rex Krzyk Striker

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla T-Rex Striker (14 stron) w kategorii Krzyk. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/14
12V Motorised
Jockey Wheels
Colours and appearances may vary
User Manual
[Revision 9.0 October ]2022
READ THIS MANUAL CAREFULLY BEFORE USE FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY
DAMAGE AND MAY VOID WARRANTY. • . • Products covered by KEEP THIS MANUAL FOR FUTURE REFERENCE
this manual may vary in appearance, assembly, inclusions, specications, description and packaging.
12V Motorised Trailer Jockey Wheel
E&OE © Trex 2 2022
Safety
Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or
equipment or property damage if not understood or followed. Safety messages have the following symbols:
You WILL be KILLED or
SERIOUSLY INJURED if you
do not follow instructions.
You CAN be KILLED or
SERIOUSLY INJURED if you
do not follow instructions.
You CAN be INJURED if you
do not follow instructions or
equipment damage may occur.
It is vital that you read and understand
this user manual before using the product,
including safety warnings, and any
assembly and operating instructions.
Keep the manual for future reference.
Safety precautions and recommendations
detailed here must be fully understood
and followed to reduce the risk of injury,
re, explosion, electrical hazard, and/or
property damage.
Safety information presented here is
generic in nature some advice may not
be applicable to every product. The term
"equipment" refers to the product, be it
electrical mains powered, battery powered
or combustion engine powered.
- If you are not familiar with Before Use
the safe operation/handling of the
equipment, or are in any way unsure of
any aspect of suitability or correct use
for your application, you should
complete training conducted by a
person or organization qualied in safe
use and operation of this equipment,
including fuel/electrical handling and
safety.
Do NOT operate the equipment in
ammable or explosive environments,
such as in the presence of ammable
liquids, gases or dust. The equipment
may create sparks or heat that may
ignite ammable substances.
Keep clear of moving parts.
Equipment may be a potential source of
electric shock or injury if misused.
Do NOT operate the equipment if it is
damaged, malfunctioning or is in an
excessively worn state.
Do NOT allow others to use the
equipment unless they have read this
manual and are adequately trained.
Keep packaging away from children -
risk of suocation! Operators must use
the equipment correctly. When using
the equipment, consider conditions and
pay due care to persons and property.
General Work Area Safety
Work areas should be clean and well it.
not operate the equipment if Do
bystanders, animals etc are within
operating range of the equipment or the
general work area.
If devices are provided for connecting
dust extraction / collection facilities,
ensure these are connected and used
properly. Dust collection can reduce
dust-related hazards.
General Equipment Use and Care
The equipment is designed for
domestic use only.
Handle the equipment safely and
carefully.
Before use, inspect the equipment for
misalignment or binding of moving
parts, loose components, damage or
any other condition that may aect its
operation. If damaged, have the
equipment repaired by an authorised
service centre or technician before use.
Prevent unintentional starting of the
equipment - ensure equipment and
power switches are in the OFF position
before connecting or moving
equipment. Do not carry equipment
with hands or ngers touching any
controls. Remove any tools or other
items that are not a part of the
equipment from it before starting or
switching on.
Do not force the equipment. Use the
correct equipment for your application.
Equipment will perform better and be
safer when used within its design and
usage parameters.
Use the equipment and accessories
etc. in accordance with these
instructions, considering working
conditions and the work to be
performed. Using the equipment for
operations dierent from those
intended could result in hazardous
situations.
Always keep equipment components
(engines, hoses, handles, controls,
frames, housings, guards etc) and
accessories (cutting tools, nozzles, bits
etc) properly maintained. Keep the
equipment clean and, where
applicable, properly lubricated.
Store the equipment out of reach of
children or untrained persons. To avoid
burns or re hazards, let the equipment
cool completely before transporting or
storing. Never place or store the
equipment near ammable materials,
combustible gases or liquids etc.
The equipment is not weather-proof,
and should not be stored in direct
sunlight, at high ambient temperatures
or locations that are damp or humid.
Do not clean equipment with solvents,
ammable liquids or harsh abrasives.
For specic equipment safety use and
care, see . Equipment Safety
12V Motorised Trailer Jockey Wheel
E&OE © Trex 3 2022
General Electrical Safety
Inspect electrical equipment, extension
cords, power bars, and electrical ttings
for damage or wear before each use.
Repair or replace damaged equipment
immediately.
Ensure all power sources conform to
equipment voltage requirements and
are disconnected before connecting or
disconnecting equipment.
When wiring electrically powered
equipment, follow all electrical and
safety codes.
Wherever possible, use a residual
current device (RCD).
High voltage / high current power lines
may be present. Use extreme caution
to avoid contact or interference with
power lines. Electrical shock can be
fatal.
General Electrical Safety
Electrically grounded equipment must
have an approved cord and plug and be
connected to a grounded electrical
outlet.
Do NOT bypass the ON/OFF switch
and operate equipment by connecting
and disconnecting the electrical cord.
Do NOT use equipment that has
exposed wiring, damaged switches,
covers or guards.
Do NOT use electrical equipment in wet
conditions or in damp locations.
Do NOT use electrical cords to lift,
move or carry equipment.
NOT coil or knot electrical cords, Do
and ensure electrical cords are not trip
hazards.
General Service Information
The equipment must be serviced or
repaired at authorised service centres
by qualied personnel only.
Replacement parts must be original
equipment manufacturer (OEM) to
ensure equipment safety is maintained.
Do NOT attempt any maintenance or
repair work not described in this
manual.
After use, the equipment and
components may still be hot allow the
equipment to cool and disconnect
spark plugs and/or electrical power
sources and/or batteries from it before
making adjustments, changing
accessories or performing repair or
maintenance.
Do NOT make adjustments while the
equipment is running.
Perform service related activities in
suitable conditions, such as a
workshop.
Replace worn, damaged or missing
warning/safety labels immediately.


Specyfikacje produktu

Marka: T-Rex
Kategoria: Krzyk
Model: Striker

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z T-Rex Striker, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Krzyk T-Rex

T-Rex

T-Rex TMA-9H Instrukcja

23 Września 2024
T-Rex

T-Rex TMA-7M Instrukcja

23 Września 2024
T-Rex

T-Rex Striker Instrukcja

23 Września 2024
T-Rex

T-Rex TMA-5H Instrukcja

23 Września 2024
T-Rex

T-Rex M50 Instrukcja

23 Września 2024

Instrukcje Krzyk

Najnowsze instrukcje dla Krzyk

Ferm

Ferm FRJ-2000 Instrukcja

14 Października 2024
Facom

Facom DL.19 Instrukcja

4 Października 2024
Linn

Linn Kivor Oktal Instrukcja

2 Października 2024
Linn

Linn Kivor Index Instrukcja

2 Października 2024
Linn

Linn Direktor Instrukcja

2 Października 2024
Linn

Linn Kivor Tunebox Instrukcja

2 Października 2024
Hamron

Hamron 601-029 Instrukcja

29 Września 2024
Hamron

Hamron 601-052 Instrukcja

29 Września 2024
Linn

Linn Kivor k Instrukcja

27 Września 2024
Westfalia

Westfalia F548 Instrukcja

16 Września 2024