Instrukcja obsługi Synco PX

Synco mikrofon PX

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Synco PX (2 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Microphone P1X
User Manual
Thank you for choosing SYNCO product. Please read this manual
carefully before use and follow all instructions mentioned herein.
1. TX Transmitter
2. RX Receiver
① Power Key
② Working Indicator
③ Built-in Microphone
④ Back Clip
⑤ Type-C Charging Port
Lightning Connector
Type-C Connector
① Volume Button
② Type-C Port
③ Working Indicator
④ Connector
Caring For Your SYNCO Product
Package List
Product Introduction
· Please keep the product in a dry, clean, dust-free environment.
· Keep corrosive chemicals, liquids and heat source away from the
product to prevent mechanics damage.
· Use only a soft and dry cloth for cleaning the product.
· Malfunction may be caused by dropping, impact of external force.
· Do not attempt to disassemble the product. Doing so voids
warranty.
· Please have the product checked or repaired by authorized
technicians if any malfunctions happened.
· Failure to follow all the instructions may result in mechanics
damage.
· Warranty does not apply to human errors.
① Transmitter
② Receiver
Slow Flash
Slow Flash
Illuminate sequentially
1~5 indicators on
Single indicator keeps on
Single indicator 󽗊ashed
slowly
Unpaired
Unpaired
Paired, normal working
Connected and working normally.
The number of lights on indicates the
current volume
Noise cancellation on
Mute on
Working Indicators (White Light) On： Flash：
Working Indicators (White Light) On： Flash：
1. Turn On/O󽗈
Operations
① Transmitter: Long press the power button of the transmitter for 3
seconds.
*Note：The transmitter will shut down automatically if it is unpaired
or disconnected for 5 minutes.
② Receiver: Insert the mobile phone device to switch on
automatically, and the indicator 󽗊ashes.
Transmitter x1 Charging cable
x1
Mic Windshield
x1
Receiver (Type-C or
Lightning Connector)
x1
3. Indicator
* Note：The indicator identi󽗉cation shown as follows.
Left Right
2. Charge
Transmitter：
Charge the transmitter via the Type-C charging
port and charging cable.
Mobile Phone :
Insert your phone's charging cable into the Type-C port of the
receiver when in use, and the charging current is adjusted according
to the phone's battery max up to 800mA.
*Note: The receiver does not need to be charged and can be used
directly when plugged in the phone.
3. Paring
The transmitter and receiver will automatically start pairing once
power on.
*Note: For P1XT/L, each transmitter can only pair with a receiver.
Carrying Bag x1 User Manual x1
Warranty Period
Warranty Exclusions and Limitations
Warranty Claim Procedure
Thank you for purchasing SYNCO products.
1. Customers are entitled to free replacement or repair service in case
of quality defect(s) found in the product under normal use within 30
days upon receipt of the product.
2. Original SYNCO products are entitled to 12-month limited warranty
service. The warranty period begins on the date of purchase of brand
new, unused products by the 󽗉rst end-user.
Within the warranty period, if product defect or failure is attributable
to material defection or technological problem, the defective product
or defective part will be repaired or replaced without charge (service
and materials fee).
Faults resulted from inappropriate use of a product without
following its operation speci󽗉cation
1. Arti󽗉cial damage, e.g. crash, squeeze, scratch, or soaking
2. Modi󽗉cations to a product by its user or a third party without prior
written consent of SYNCO, e.g. replacement of element or circuit,
label alteration
3. The code on product is inconsistent with that of warranty
certi󽗉cate, or the code on the product or warranty certi󽗉cate is
altered or torn o󽗈
4. All consumable accessory attached to a product, like cable, wind
mu󽗈, battery
5. Faults as a result of force majeure, such as 󽗉re, 󽗊ood, lightning, etc.
1. If failure or any problem occurs to your product after
purchase, please contact a local agent for assistance, or you can
always contact SYNCO’s customer service through email at
support@syncoaudio.com.
2. Please retain your sales receipt and warranty certi󽗉cate as proof of
purchase. If any of these documents is missing, only sales return or
chargeable service will be provided.
3. If the SYNCO product is out of the warranty coverage, the service
and the parts cost will be charged.
Warranty
*Please register your warranty. Meanwhile, you are welcomed to contact us via Email：
support@syncoaudio.com
Product Model:
Date of Purchase:
Serial Number:
Malfunction Description :
Buyer Name:
Buyer Telephone :
Buyer Mail :
Buyer Address :
Dealer :
Dealer Telephone :
Delivery Date :
Cause of Malfunction :
Maintenance Personnel :
Malfunction Processing :
WARRANTY CERTIFICATE
Wireless Transmission
RF Frequency Band
Frequency Response
Working Distance
Sampling Rate
Bit Depth
Sensitivity
SNR
Battery Type
Battery Charging Time
Battery Life
Dimensions
Material
Weight
Wireless Transmission
RF Frequency Band
Working Distance
Sampling Rate
Bit Depth
Connector
Power Input
Dimensions
Material
Weight
Digital 2.4GHz
2400-2483.5MHz
20Hz-20KHz
492ft/150m(LOS area);
164ft/50m(NLOS area)
48KHz
16Bit
-36dB
＞ 75dB
Built-in Lithium Battery, 120mAh
1.5H
5H
49x19x19 (mm)
ABS
10g
Digital 2.4GHz
2400-2483.5MHz
492ft/150m(LOS area);
164ft/50m(NLOS area)
48KHz
16Bit
Type-C or Lightning Output
Type-C
49x30x9 (mm)
ABS
5g
TX Transmitter
RX Receiver
Speci󽗉cations
Guangzhou Zhiying Technology Co., Ltd
Room 2401, 24 / F, South Tower, Lisheng Plaza, No. 68 Huadi Avenue,
Liwan District, Guangzhou, China, 510000
support@syncoaudio.com
www.syncoaudio.com
4. Adjust the Volume
Press the receiver volume button to adjust the volume and the
number of indicators shows the current volume level.
Double press the volume button to enable or disable mute and single
indicator keeps on when mute is on.
Lv.1
Lv.2
Lv.3
Lv.4
Lv.5
Mute
5. Noise Reduction
Press the power button of the transmitter to turn on the noise
reduction, the single indicator keeps on.
* Double press the power button of the transmitter to turn o󽗈/on the
light e󽗈ect.

Specyfikacje produktu

Marka: Synco
Kategoria: mikrofon
Model: PX

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Synco PX, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje mikrofon Synco

Synco

Synco G2A1 Instrukcja

2 Kwietnia 2025
Synco

Synco PX Instrukcja

2 Kwietnia 2025
Synco

Synco MC3 LITE Instrukcja

2 Kwietnia 2025
Synco

Synco G2A2 Instrukcja

2 Kwietnia 2025
Synco

Synco G1A1 Instrukcja

2 Kwietnia 2025
Synco

Synco G1 Pro Instrukcja

2 Kwietnia 2025
Synco

Synco G2 Max Instrukcja

2 Kwietnia 2025
Synco

Synco LAV-S6P Instrukcja

29 Marca 2025
Synco

Synco MA30 Instrukcja

27 Marca 2025
Synco

Synco P2S Instrukcja

27 Marca 2025

Instrukcje mikrofon

Najnowsze instrukcje dla mikrofon

Comica

Comica VP3 Instrukcja

2 Kwietnia 2025
Atlas Sound

Atlas Sound MWHHM Instrukcja

2 Kwietnia 2025
Samson

Samson Concert XD2 Instrukcja

30 Marca 2025
TC Helicon

TC Helicon GoXLR MIC Instrukcja

27 Marca 2025
Astatic

Astatic 827A Instrukcja

27 Marca 2025
MXL

MXL Forge Instrukcja

22 Marca 2025
Austrian Audio

Austrian Audio OC16 Instrukcja

19 Marca 2025
Kenwood

Kenwood KMC-66 Instrukcja

18 Marca 2025
Kenwood

Kenwood KMC-70 Instrukcja

18 Marca 2025
Kenwood

Kenwood KMC-32 Instrukcja

18 Marca 2025