Instrukcja obsługi Synco P1T

Synco nieskategoryzowany P1T

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Synco P1T (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions
mentioned herein.
Microphone P1T User Manual
Caring For Your SYNCO Product
Package List
Product Instruction
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the product
to prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if
any malfunctions happened.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
TX Transmitter x1 Wireless Charging
Case x1
Charging Cable x1 Type-C to 3.5mm Adapter x1
TX Transmitter
RX Receiver
Wireless Charging Case
① Power
② Working Indicators
③ Built-in Mic
④ Contacts
⑤ Pocket Clip
① Vocal E󽗈ects
② Type-C Port
③ Working Indicators
④ Connector
⑤ Contacts
① Pairing/ Power Prompt
② Type-C Port
③ Working Indicators
④ Contacts
RX Receiver (Type-C
Connector) x1
Indicator — Receiver
Indicator — Wireless Charging Case
Indicator — Transmitter (Double press the Power button to turn o󽗈 light
e󽗈ect)
Flash concurrently
Flash concurrently
Illuminate sequentially
Single light keeps on &
Illuminate sequentially
Single light keeps on (In the
case)
Illuminate sequentially (Light
e󽗈ect on)
Single light keeps on (Light
e󽗈ect o󽗈)
Single light 󽗊ashes
Illuminate sequentially
Single light 󽗊ashes twice &
Illuminate sequentially
System unpaired
System unpaired
Pairing
Original sound
Charging, and then turns o󽗈 when fully
charge
System paired, normal working
System paired, normal working
Low battery
System paired
Vocal e󽗈ects on
Working Indicators (White Light)
Working Indicators (White Light)
Working Indicators (White Light)
Working Indicators (Red Light)
Operations
1. Usage
2. Manual Pairing
3. Charging
4. Check the power
5. Use vocal e󽗈ects
① Tap on the right side of charging case to pop
out the drawer
② Take the TX and RX out
③ TX should boot automatically as it leaved the
case, and switch itself o󽗈 automatically when
returning to the case.
① Place the TX and RX in the case with their
contacts are connected with the case’s
② Long press the Pairing button on the case for
3 seconds with the drawer open
③ The indicators on the TX and RX should light
up and illuminate sequentially when pairing is
successful
Note: The transmitter will automatically switch
o󽗈 if it is unpaired or disconnected for 5 minutes.
Charge the TX: Place the TX in the case with
contacts connected with the case’s.
Charge the case: Connect the case with power
supply via the charging cable.
TX: Short press the Power button, the indicators will light up according to
remain power for 5 seconds
Charging Case: Short press the Power Prompt button, the indicators will
light up according to remain power for 5 seconds
Short press the Vocal E󽗈ects button on the receiver to switch sound e󽗈ects:
Original >> Studio FX >> KTV FX >> Voice Ampli󽗉cation >> EDM (Electronic
Dance Music) >> Baby FX >> Male to Female >> Female to Male >> Monster FX.
Default e󽗈ect: Original
Long press for 3 seconds
(Forcible switch: Long press the Power button on TX for 3 seconds)
④ RX should boot automatically as it is plugged into smartphone
Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou,
China, 510000
support@syncoaudio.com
www.syncoaudio.com
https://www.facebook.com/syncomicrophones
Guangzhou Zhiying Technology Co., Ltd
Battery Type
Battery Charging Time
Charging Port
Power Requirements
Dimensions
Weight
Built-in Lithium Battery, 300mAh
1.5H
Type-C Port
5V 2A
70x43x37 (mm)
58g
Wireless Charging Case
Warranty Exclusions and Limitations
Faults resulted from inappropriate use of a product without following its
operation speci󽗉cation
Warranty Claim Procedure
If failure or any problem occurs to your product after purchase, please
contact a local agent for assistance, or you can always contact SYNCO’s
customer service through email at support@syncoaudio.com.
Please retain your sales receipt and warranty certi󽗉cate as proof of
purchase. If any of these documents is missing, only sales return or
chargeable service will be provided.
If the SYNCO product is out of the warranty coverage, the service and the
parts cost will be charged.
Warranty Period
Thank you for purchasing SYNCO products.
1. Customers are entitled to free replacement or repair service in case of
quality defect(s) found in the product under normal use within 30 days upon
receipt of the product.
2. Original SYNCO products are entitled to limited warranty 12-month
service. The warranty period begins on the date of purchase of brand new,
unused products by the 󽗉rst end-user.
Within the warranty period, if product defect or failure is attributable to
material defection or technological problem, the defective product or
defective part will be repaired or replaced without charge (service and
materials fee).
Warranty
Arti󽗉cial damage, e.g. crash, squeeze, scratch, or soaking
Modi󽗉cations to a product by its user or a third party without prior written
consent of SYNCO, e.g. replacement of element or circuit, label alteration
The code on product is inconsistent with that of warranty certi󽗉cate, or
the code on the product or warranty certi󽗉cate is altered or torn o󽗈
All consumable accessory attached to a product, like cable, wind mu󽗈,
battery
Faults as a result of force majeure, such as 󽗉re, 󽗊ood, lightning, etc.
WARRANTY CERTIFICATE
USER
INFORMATION
SALES
INFORMATION
REPAIR
RECORD
RESULT
Please register your warranty. Meanwhile, you are welcomed to contact us
via Email：support@syncoaudio.com
Customer Name:
Phone Number:
Email:
Address:
Sales Date:
Model:
Product Code:
Dealer:
Service Date:
Technician:
Issue:
Solved Unsolved Returned(Replaced)
Wireless Transmission
RF Frequency Band
Working Distance
Sampling Rate
Bit Depth
Antenna
Monitoring
Connector
Power Input
Dimensions
Material
Weight
Digital 2.4GHz
2400-2483.5MHz
492ft/150m(LOS area); 164ft/50m(NLOS area)
48KHz
16Bit
Built-in
3.5mm In-Ear Monitoring
Type-C Output
Type-C
49x30x9 (mm)
ABS
5g
TX Transmitter
RX Receiver
Speci󽗉cations
Wireless Transmission
RF Frequency Band
Frequency Response
Working Distance
Sampling Rate
Bit Depth
Sensitivity
SNR
RF Output Power
Battery Type
Battery Charging Time
Battery Life
Dimensions
Material
Weight
Digital 2.4GHz
2400-2483.5MHz
20Hz-20KHz
492ft/150m(LOS area); 164ft/50m(NLOS area)
48KHz
16Bit
-26dB
＞75dB
10dB
Built-in Lithium Battery, 120mAh
1.5H
5H
49x19x19 (mm)
ABS
10g
6. Charging phone device
7. In-Ear monitoring
Plug your phone charging cable into the Type-C Port on the receiver.
Plug the included Type-C to 3.5mm Adapter into the Type-C Port on the
receiver. Then plug in your headphones to real-time monitor mic recording
and device’s backgrounding.
Note: The included Type-C to 3.5mm Adapter is exclusive, not available for
other devices.

Specyfikacje produktu

Marka: Synco
Kategoria: nieskategoryzowany
Model: P1T

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Synco P1T, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Synco

Synco

Synco X-Talk X5 Instrukcja

16 Września 2024
Synco

Synco P2T Instrukcja

13 Września 2024
Synco

Synco WAir-G1L Instrukcja

13 Września 2024
Synco

Synco P1T Instrukcja

13 Września 2024
Synco

Synco WAir-G1T Instrukcja

13 Września 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact Qualite QL-3560-LED Instrukcja

4 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact Forever Ready Cool FRC-24-LED Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact Varipole Drop Ceiling Adapter Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024