Instrukcja obsługi Syma X25PRO

Syma nieskategoryzowany X25PRO

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Syma X25PRO (18 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/18
USER MANUAL
12+
1
MAIN FEATURES
GYRO REMOTE CONTROL SERIES
● Utilizes the 4-axis structure, enabling the drone to be even more flexible ,speedy,
and possessing a relatively stronger wind-withstanding capability. It suitable for
both spacious indoor and outdoor areas.
● Built-in 6-axis gyro stabilizer to ensure the accuracy of in-flight position.
● The structure uses a modular design which makes it easier to install and repair.
● With the functions of outdoor GPS fixed-point, one key return, auto return when
the drone is out of control or in low-voltage, one key ascent/descent, geomagnetic
headless, position hovering mode and 4 channels function which are up/down ,
rise/decline,turn left/right, forward/backward, left/right side flight, follow me, circle
flight .
● HD wifi real-time transmission for getting the fun of different photography.
-1-
1.Use dry and soft cloth to clean this product.
2.Avoid exposing this product to heat.
3.Do not immerse this product in water, otherwise, the electronic parts will be
damaged.
4.Transformers used with the toy are to be regularly examined for damage to the
cord,plug,enclosure and other parts,and that,in the event of such damage,the toys
must be used with this transformer until the damage has been repaired.
Safety Guide
Repair and maintenance
1.Please store the smaller-sized drone accessories in places that are out of
reach of children.
2.This drone is very powerful. For all first-time flights, the left joystick must be
slowly pushed up in order to prevent the drone from ascending too fast to
avoid unnecessary collision and possible damage and injury.
3.When the flight is ended, first turn off the power of the remote control.
Then turn off the power of the drone.
4.Avoid placing the batteries in places with high temperatures and exposure
to heat.
5.Take extra precaution to ensure that the drone is at a minimum distance of
15 feet from the pilot, other people, and animals in order to prevent bodily
injury during flight operation. A minimum separation distance of 20 cm must
be maintained between the user’s body and the device under normal use
condition.
6.This drone is for people ages 12+. It must be flown always within the line of
sight of the pilot(or instructor) and flown safely.
7.Non-rechargeable batteries are not to be recharged; Batteries are to be
inserted with the correctpolarity; Different types of batteries or new and
used batteries are not be mixed.
8.When the drone is not in use, please remove the batteries in the remote
control.
9.The supply terminals are not be short-circuited.
10.Discharge the battery to 40%-50% (On a full charge, fly for half of the total
flight time) if it will not be used for 10 days or more, this can greatly extend
the battery life.
11.Please keep a safe distance from the spinning propellers to avoid injury.
12.To ensure the electromagnetic environment requirement of the aviation
radio (station), using remote controls in the zone, which is in a radius of
about 5000m zone from the circle center of the airport runway, is forbidden.
All users also should abide by the regulation of the radio set forth by
government and regulatory agencies including the duration and area.
13.Only uses the recommended transformer for the model, and the transformer
is not a model. Disconnect the transformer from the model which is available
cleaning with liquids before cleaning. Check the cord, plug, enclosure and
other parts of the transformer regularly. If any damages have been
discovered, please immediately stop using it, until it was completely repaired.
14.Never look steadily at the laser beam since the laser radiation.
15.Attention Drone assembly under adult supervision.：
16.The pilot is responsible for the safe operation and safe distance from
uninvolved persons and property on the ground and from other airspace
users and shall never fly the drone above crowds (> 12 persons).
17.Open the battery cover of the toy with screwdriver.
18.The packing has to be kept since it contains important information.
-2-
Blade’s installation
Protective Gear’s Installation
Blade and Protective Gear’s Installation Methods
Camera’s Installation and
Dismantling Methods
Installation steps for camera
The following items can be found in this product package:
Package description
●Drone
●Remote Control
●User Manual
●4 Blades
●USB Charger
●4 Protective Gears
●Mobile Phone Retaining Clip
1.Connect the camera’s wire
connector to the drone.
2.Place the camera into the drone and
rotate the camera counterclockwise to
lock.
Press the blade lock down, and then the blade "A" is
rotated in A clockwise direction to remove, and it is
locked in A counterclockwise rotation;The blade B is
rotated in A counterclockwise to remove, and it is locked
in A clockwise rotation.
1. Insert the protective gear into the
two jack connectors underneath the
main body as shown in Figure 1.
2. Insert the stem on the protective
gear into the jack connector on the
main body as shown in Figure 2 and
press it.

Specyfikacje produktu

Marka: Syma
Kategoria: nieskategoryzowany
Model: X25PRO

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Syma X25PRO, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Syma

Syma

Syma X25PRO Instrukcja

23 Sierpnia 2024
Syma

Syma S107H Instrukcja

23 Sierpnia 2024
Syma

Syma X8SW-D Instrukcja

23 Sierpnia 2024
Syma

Syma S5 Instrukcja

23 Sierpnia 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 323226 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 386652 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 398633 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG08612A Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 359577 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 366957 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 366612 Instrukcja

27 Października 2024