Instrukcja obsługi Sylvania SB374W


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sylvania SB374W (7 stron) w kategorii soundbar. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/7

        Bluetooth   Sound bar System

Comprehensive Owner’s Manual
 
The lightning flash with arrowhead within
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and safety
instructions in the literature
accompanying the appliance.
CAUTION: TO PREVENT THE RISK OF
ELECTRIC SHOCK, DO NOT OPEN
THIS PRODUCT. NO USER-
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
an equilateral triangle is intended to alert
the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be a risk of electric
shock to persons.
IMPORTANT SAFETY INSTRUCTIONS
READ MANUAL
- Read all the safety and operating instructions before
the product is operated.
RETAIN MANUAL
- This manual should be retained for future reference.
HEED WARNINGS
- All warnings on the product and in the operating
instructions should be adhered to.
FOLLOW INSTRUCTIONS
- All operating and use instructions should
be followed.
CLEANING
- The product should be cleaned only with a polishing cloth
or a soft dry cloth. Never use volatile liquids since they may damage the
product.
WATER AND MOISTURE
- Do not use this product near water such as
near a bathtub, kitchen sink, in a wet basement; or near a swimming
pool, etc.
OBJECT OR LIQUID ENTRY
- Do not insert any kind of object into this
product through any opening as they may make contact with electrical
points and result in a fire or electric shock. Avoid spilling any kind of liquid
on the product.
VENTILATION
- Openings in the cabinet are provided for ventilation and
to protect the product from overheating, and these openings must not be
blocked or covered.
HEAT
- The product should be placed away from sources of heat such
as radiators, stoves, or other products that produce heat. Leave a
comfortable gap between this product and all other electronics in your
Home Theater system.
LOCATION
This product should be installed in a stable location.
POWER-CORD PROTECTION
- Power-supply cords should not be
stepped on or pinched by items placed upon or against them. Pay
particular attention to cords at plugs and the point where they exit from
the product.
OVERLOADING
- Do not overload wall outlets, extension cords, or
power strips as this can result in a risk of fire or electric shock.
POWER SOURCES
- This product should be operated only from the
type of power source indicated on the label. If you are not sure of the type
of power supply to your home consult your local power company.
NONUSE PERIODS
– The power cord should be unplugged from the
outlet when left un-used for a long period of time.
LIGHTNING
- For extra protection during a lightning storm or when the
product is left unattended and unused for long periods of time, unplug the
power cord. This will prevent damage due to lightning and power surges.
SERVICING
- Do not attempt to service this product yourself as opening
the product may expose you to electric shock, or the product may be
damaged. Refer all servicing to qualified service personnel.
DAMAGE REQUIRING SERVICE — Unplug this product from the
wall outlet and contact a qualified service personnel under the following
conditions:
  When the power-supply cord or plug is damaged.
 If liquid has been spilled, or objects have fallen into the product.
 If the product has been exposed to rain or water.
 If the product does not operate normally following the instructions in
this manual.
 If the product has been dropped or damaged in any way.
 When the product exhibits a distinct change in performance.
CAUTION – TO PREVENT ELECTRIC SHOCK DO NOT PLUG A
CABLE INTO A WALL OUTLET, EXTENSION CORD, OR OTHER
RECEPTICLE UNLESS THE METAL BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
Caution! Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
We appreciate your choosing SYLVANIA Sound bar for use in your home. These unique sound bar will
provide you with powerful and satisfying sound from an ultra stylish & compact package. Please read
this manual completely to ensure the best possible performance from your system.
Panel Description
Pair:The indicator for pair with wireless subwoofer ,The bar PAIR red light flicker as long press 5seconds of pair key in the remote ,and then
long press subwoofer pair button for hold 5seconds turn the indicator green light flashing to be red light .connect successfully while indicator
long bright .please switch sound bar in case of connection fail and turn on the power again for connection automatically .
IR The remote control signal receiver
BT: The Indicator for blue-tooth input status. Frequent blinks of the LED indicate a failure of the communication, while infrequent
ones indicates a successful communication,Bluetooth connection name :SYLVANIA .
AUX1/2: The input signal indicator. The indicator is green when the signals are being input into AUX1, red into AUX2 .orange light blink slowly
for Mute and orange light on for standby.
Remarks :Keep away 4M from microwave oven & WIFI when set up sound bar system for better signal transmission .
Description of the terminals at the back
1: Power switch
2DC 21V 1.7A input jack
3: Sound bar heat emission hole
4:Input AUX1/AUX2
1
2
3 4


Specyfikacje produktu

Marka: Sylvania
Kategoria: soundbar
Model: SB374W

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sylvania SB374W, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje soundbar Sylvania

Sylvania

Sylvania SB374W Instrukcja

12 Września 2024
Sylvania

Sylvania SB379W Instrukcja

12 Września 2024

Instrukcje soundbar

Najnowsze instrukcje dla soundbar

Onkyo

Onkyo SBT-A500 Instrukcja

15 Października 2024
Insignia

Insignia NS-HTSB20S Instrukcja

15 Października 2024
Bose

Bose Smart Soundbar Instrukcja

9 Października 2024
LG

LG LAS350B Instrukcja

9 Października 2024
Samsung

Samsung HW-Q810D Instrukcja

9 Października 2024
Roku

Roku Streambar Pro Instrukcja

9 Października 2024
LG

LG S45TR Instrukcja

8 Października 2024
Majority

Majority Naga 80 Instrukcja

8 Października 2024
Majority

Majority Teton Instrukcja

8 Października 2024
Majority

Majority Naga 60 Instrukcja

8 Października 2024