Instrukcja obsługi SWIT S-8210S

SWIT bateria do aparatu fotograficznego S-8210S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SWIT S-8210S (1 stron) w kategorii bateria do aparatu fotograficznego. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/1

High Load Rechargeable Li-ion Battery Pack

Tel: +86-25-85805753

Fax: +86-25-85805296

http://www.swit.cc

E-mail: contact@swit.cc

Characteristics

1. High power output Li-ion battery pack, rechargeable.

2. 4-step LED power indicator.

3. D-tap DC output and charging socket.

4. Build-in multiple protective circuit design.

Caution

1. Never attempt to open the battery pack.

2. Use SWIT charger or the chargers recommended by SWIT.

3. Please make sure the battery mount on camera could endure

high current, otherwise it might damage the mount or battery.

4. Keep the battery pack terminals clean.

5. Never short-circuit the battery pack terminals.

6. Never expose the battery pack to rain, fire or moisture.

7. Never expose the battery pack to temperature above 60 .

8. Avoid strong mechanical shock.

9. The battery pack may become warm in use or while being

charged. This is normal.

Charging

1. The battery pack is not fully charged when it is purchased.

Charge the battery before use.

2. Use SWIT charger or the chargers recommended by SWIT.

3. The battery pack should be charged within a temperature

range of 0-40

Discharging

1. Fully charged battery pack will discharge naturally and please

use it as soon as it gets charged.

2. At low temperature, the running time of battery pack usually

decreases.

3. The internal impedance of battery pack will be greater at low

temperature, which may cause the automatically circuit cutting.

4. According to the using conditions, please set the camera low

battery warning voltage at 13-14V, cut off voltage at 12-13V.

LED indicator

1. The four-step LEDs indicate the remaining capacity when

press the “CHECK” button.

2. The indicator may not be accurate when the battery is

powering on the camera.

3. When only one LED indicates, please charge the battery as

soon as possible.

DC socket

The D-tap DC socket can be used as 14.4V DC output or SWIT

S-3010B charging input.

1. Open the rubber cover and plug in D-tap lead to DC output or

charge.

2. Close the rubber cover when disconnected, to keep the socket

away from dust.

Self-protection and Re-activate

The battery pack has multiple protective circuits and will cut off

power automatically when overload or any abnormal detected.

Mount the battery pack to any SWIT charger, it will be re-

activated and get charging normally.

Storage

Please keep in cool, dry and clean place.

Specifications

Model Mount Type Nominal

voltage Capacity Max output Dimension Mass

S-8210A Gold Mount 14.4V 115Wh 8Ah 150W 12A 165×90×53mm 900g

S-8210S V-mount 14.4V

115Wh 8Ah 150W 12A 165×90×51mm 900g

S-8260A Gold Mount 14.4V

172Wh 12Ah 180W 15A 165×90×68mm 1300g

S-8260S V-mount 14.4V

172Wh 12Ah 180W 15A 165×90×66mm 1300g

12-05

Specyfikacje produktu

Marka:	SWIT
Kategoria:	bateria do aparatu fotograficznego
Model:	S-8210S
Kolor produktu:	Czarny
Wysokość produktu:	53 mm
Szerokość produktu:	165 mm
Głębokość produktu:	90 mm
Waga produktu:	900 g
Ilość na paczkę:	1 szt.
Pojemność baterii:	115 Wh
Technologia baterii:	Litowo-jonowa (Li-Ion)
Przeznaczenie:	Kamera wideo
Kompatybilność marki:	SWIT
Napięcie baterii:	14.4 V