Instrukcja obsługi SWIT S-4904P


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SWIT S-4904P (12 stron) w kategorii przedłużacz AV. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
Model: S-4904P
Wireless HD Transmission System
with Panel Receiver
User Manual
Ver:A
SWIT ELECTRONICS CO., LTD
Please read this User Manual
throughout before using
1
Preface
PrefacePreface
Preface
1 All internal technologies of this product are protected, including device, software and trademark.
Reproduction in whole or in part without written permission is prohibited.
2 All brands and trademarks of SWIT Electronics Co., Ltd. are protected and other relative trademarks in this
user manual are the property of their respective owners.
3 Due to constant effort of product development, SWIT reserves the right to make changes and
improvements to the product described in this manual without prior notice.
4 The warranty period of this product is 2 years, and does not cover the following:
(1) Physical damage to the products;
(2) Any damage or breakdown caused by use, maintenance, or storage not according to the user manual’s
instructions;
(3) The attenuation of signal quality resulting from being used in any special environments;
(4) Any damage caused by not powering the product by package supplied power adaptor.
(5) Any damage or breakdown not caused by the product’s design, workmanship, or manufacturing quality,
etc.
5 For any suggestions and requirements on this product, please contact us through phone, fax, Email, etc.
SWIT Electronics Co., Ltd.
Address: 10 Hengtong Road, Nanjing Economic and Technological Development Zone,
Nanjing 210038, P.R.China
Phone: +86-25-85805753
Fax: +86-25-85805296
Email: contact@swit.cc
Website: http://www.swit.cc
2
For Your Safety
Before start, please follow the safety precautions below
Do not try the followings:
1. Unauthorized repairs or parts replacement or other operations.
2. Inappropriate placement including but not limited to lighting, fire, exposure to rain, water or gas.
3. Switch to the power not in the voltage allowable range.
Warning
Do not get any liquid inside the product.
Do not block the ventilation openings or get substances inside, in order to avoid short circuit, fire or electric
shock.
Do not soak the product into water to avoid electric shock or fire.
Make sure the protection work on the rainy day.
Do not reverse the receiver to get the best transmission effect.
Danger
Switch the power off before connecting other devices.
Power socket: Make sure the power socket under the voltage range of the product to avoid short circuit,
electric shock and fire.
Power cable: Make sure the power cable is not pressed or tightened by any items or weights.
Power Load: Do not exceed the load on the wall outlet, extension cable or other porous receptacle to avoid
fire or electric shock.
Lighting: Disconnect the power cable if it is lighting or not using in a lperiod of time.
Working environment
Please don't lay the product on any unstable place to avoid fallen damage
Please don t use the product in a place overheating, undercooling or with lots of moisture, or near by strong
magnetic devices.
Please don’t lay the product on metal shelf, in order to ensure the effective wireless transmission.


Specyfikacje produktu

Marka: SWIT
Kategoria: przedłużacz AV
Model: S-4904P

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z SWIT S-4904P, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje przedłużacz AV SWIT

SWIT

SWIT S-4904P Instrukcja

27 Września 2024

Instrukcje przedłużacz AV

Najnowsze instrukcje dla przedłużacz AV