Instrukcja obsługi SWIT S-4020

SWIT nieskategoryzowany S-4020

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SWIT S-4020 (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

S-4010/S-4020/S-4030

Power Station Box

Ver:C.2

Tel:+86-25-85805753

Fax:+86-25-85805296

http://www.swit.cc

E-mail: contact@swit.cc

USER MANUAL

S W I T E l e c t r o n i c s Co . , LT D.

Congratulations on your purchase of this product. Please read this user manual carefully.

Warning Caution

Never expose this product to rain or moisture.

Never attempt to open this product, please contact the local

agent if have problems.

Never use metal or other conductors to touch the inside of

this product.

Never use the charger not provided by the manufacturer to

charge the Li-ion batteries in order to avoid damage.

Never short-circuit the output socket.

Never put this product in unstable place, it may fall and cause

serious damage.

◆

Only limited to charge/discharge specied size of batteries.

Only work in the temperature between 0 - 40℃ ℃.

Keep the terminals clean and ensure the reliable connection.

Do not cover the cooling vent.

Use the specied fuse to avoid damage.

Not support charge and discharge at the same time.

Pay attention to the selection of the output socket.

◆

Introduction Feature

1. Install the V-mount battery following the arrow direction as

shown in gure 1. Battery and battery plate are well

connected with cracking sounds.

2. Use the provided battery charger to charge

(Only limited to charge/discharge specied

batteries). It may cause danger if charge

other batteries due to incompatibility

problem, see details as showed in

“Applicable Battery”. It can charge

maximum 4 V-mount batteries

simultaneously.

3. Make sure the batteries and

battery plates are well connected

before charging.

4. During charging process, pls

refer to “LED panel instruction” to

check the status.

5. When the indicator turns green,

it means fully charged.

Charging Discharging

1. Install the V-mount battery following the arrow direction as

shown in gure 1. Battery and battery plate are well connected

with cracking sounds.

2. To ensure continuous power supply and maximum power

output, it is recommended to use 4 pieces of the same

model and fully charged V-mount batteries to discharge,

otherwise the loading capacity will reduce or cause battery

and adapter protection.

3. S-4020 can output 12V or 24V according to the demands:

①. Dial up the power switch to “ ”, 12V will be activate, －

DC 11-16.8V has output while DC 22-33.6V has no output.

②. Dial down the power switch to ” ”, 24V will be activate,＝

DC 22-33.6V has output while DC 11-16.8V has no output.

4. For S-4030, the sum of 2 channels maximum output load is 15A.

5. Please choose the proper XLR cable. Make sure this product

and load equipment are well connected and no short circuit

before loading.

6. Please change or charging the Li-ion batteries if the LED low

battery warning displays.

fig1

Applicable Battery

All SWIT V-mount batteries no larger than 168x101x68mm

Storage

Please turn o the power switch if it is not used for a long time and take out the inside V-mount batteries.

Keep in cool and dry place.

Please avoid contact with corrosive substances, away from re and heat source.

◆

It adopts PP+ Fiber glass case which is high intensity, high

toughness and high temperature resistant. It can install 4 pieces

of V-mount batteries which can provide more power and longer

power supply time comparing to single Li-ion battery. It can

meet the demand of dierent users, and is very suitable for Cine

cameras, lightings for Film & Television and mobile studios.

1. PP+ Fiber glass case, strong and durable

2. Install 4 x V-mount batteries

3. Charging without take out batteries by provided 4-pin XLR DC

charging socket

4. LED panel to display real-time voltage and low voltage warning

5. Intelligent protective circuit design, safe and reliable

LED Panel Instruction

Specification Packing List

Product appearance

Fig2 Fig3

① Battery plate

② 4-pin XLR DC charging socket

(Pin 1: Negative, Pin 3: Positive)

③ On/O

④ LED display panel

⑤ ⑧ Fuse holder

⑥ ⑦ DC output

S-4010

S-4030

S-4020

⑥ ⑦ 4-pin XLR DC output socket

(Pin 1: Negative, Pin 4: Positive)

⑥ ⑦ 3-pin XLR DC output socket

(Pin 1: Negative, Pin 2: Positive)

⑥ 3-pin XLR DC output socket

(Pin 1: Negative, Pin 2: Positive)

⑦ 4-pin XLR DC output socket

(Pin 1: Negative, Pin 4: Positive)

S-4010 S-4030 (Dual 12V output) S-4020(12V/24V output) (Dual 24V output)

Model

Input

Output

Dimension

Net weight

Working

environment

DC 16.8V 5A

(Charging)

DC 16.8V 5A

(Charging)

DC 16.8V 5A

( ）Charging

290mm x 221mm x 278mm

3.45Kg

Item Name

Power Station Box

Fuse(65TS-150H/L)

Charger

Power Cable

Warranty Card

User Manual

Certicate of Quality

Quantity

DC11-16.8V

15Ax2 (180Wx2)

DC 11-16.8V 15A (180W) Or

DC 22-33.6V 15A (360W)

DC 22-33.6V p2-x2

Together 15A(360W)

Working temperature: 0 +40 ℃～ ℃

Working humidity: 10% 90%～

Storage temperature: -15 60 ℃～﹢ ℃

Trouble-shooting

Description Possible Cause Solution

Can not output to power

equipments, but the LED panel

display voltage

Fuse has been damaged Change fuse

Reconnect the XLR cable.

DC output socket is not connected to the equipment

or not reliable connected

S-4020

S-4010

S-4030

“O” ：OFF

“ ” ON∣ ：

“ ” : 12V working mode－

“O” : OFF

“ ”: 24V working mode＝

Function Model ON/OFF state LED panel State

Charging

Discharge

S-4010

S-4020

S-4030

＝

∣

No Display

The outermost ring of the LED panel displays in recycling show way and after each circle,

it will display the current voltage.

The outermost ring of the LED panel displays in recycling show way and after each circle,

it will display the current voltage.

S-4010

S-4020

S-4030

Normal Working Status:

The outermost ring of the LED panel displays in recycling show way and after each circle,

it will display the current voltage.

Not in

“O”

position

No Display

Under Voltage Alarm:

The LED panel display and ash “ ”, it indicates that the voltage of the current batteries is

lower than the under-voltage protection value.

Note:

⑴. The under-voltage protection value for 12V operating mode is 13V；

⑵. The under-voltage protection value for 24V operating mode is 26V.

∣

－

Specyfikacje produktu

Marka:	SWIT
Kategoria:	nieskategoryzowany
Model:	S-4020
Kolor produktu:	Czarny
Materiał obudowy:	Włókno szklane
Wbudowany wyłącznik:	Tak
Wbudowany wyświetlacz:	Tak
Typ wyświetlacza:	LED
Wysokość produktu:	278 mm
Szerokość produktu:	290 mm
Głębokość produktu:	221 mm
Waga produktu:	3450 g
Napięcie operacyjne:	11 - 16.8/22 - 33.6 V
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	10 - 90 %
Zakres temperatur (przechowywanie):	10 - 90 °C
Rodzaj chłodzenia:	Aktywne
Prąd wyjściowy:	15 A
Liczba baterii:	4
Prąd wejściowy:	5 A
Wyjście XLR:	2
Ochrona przed przeciążeniem:	Tak
Zabezpieczenie przed zbyt wysokim napięciem:	Tak
Zabezpieczenie przed zwarciem:	Tak
Zewnętrzny zasilacz:	Tak