Instrukcja obsługi Sweex LW050UK

Sweex router LW050UK

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sweex LW050UK (22 stron) w kategorii router. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/22
English version
4
LW050/LW050UK Sweex Wireless Broadband Router 54 Mbps
Introduction
First of all, many thanks for purchasing this Sweex Wireless Broadband Router 54 Mbps. The Sweex Wireless Broadband Router 54 Mbps enables
you to share a broadband Internet connection and to set up your own wireless network.
To ensure this product operates correctly, we advise you to carefully read this manual first. If despite this manual you still experience problems during
installation or operation of this product, go to www.sweex.com and look under the heading service & support.
In order to fully enjoy the Sweex Wireless Broadband Router 54 Mbps, it is important to observe a number of things:
Do not expose the Sweex Wireless Broadband Router 54 Mbps to extreme temperatures.
Do not place the device in direct sunlight or in the direct vicinity of heating elements.
Do not use the Sweex Wireless Broadband Router 54 Mbps in extremely dusty or moist surroundings.
Protect the device against powerful shocks or jolts - they may damage the internal electronics.
Never attempt to open the device yourself - it will cause the warranty to lapse.
Contents of the box
Prior to using the Sweex Wireless Broadband Router 54 Mbps, check if all required parts are present. The following parts must be present in the box:
Wireless broadband router 54 Mbps
Antenna
Power supply adaptor
RJ-45 UTP Ethernet network cable
CD-ROM with manual and Panda Anti-virus trial software
If one of the above parts is missing, please contact the shop or supplier.
English version
5
Specifications
Supports: IEEE 803.3 and IEEE 803.3u
Supports: IEEE 802.11b, IEEE 802.11g
Maximum wireless data transfer speed: 54Mbps
Supports: DHCP (dynamic IP), PPTP, Static IP, PPPoE, L2TP
1 x WAN, 4 x LAN RJ-45 UTP ports
Supports: WEP/WPA./WPA2/802.1X data encryption
Built-in Firewall and Port Forwarding
Removable reverse SMA Antenna 5 dBi
2 to 3 x Extended Range
Supports: VPN pass through
Web-based configuration
Not operating system dependent
Front view
Status Status Meaning
Power
Off The router is switched off
Lit The router is switched on
System
Lit The router is starting up
Blinking The router is operating correctly
Off The router has a hardware error
Link/Act WAN
and 1 to 4
Off No device is connected to this port
Lit A computer or other network device is connected to this port
Blinking There is data traffic between the router and the connected device
WLAN
Off The wireless part is switched off
Blinking The wireless part is active
English version
6
Rear view
Antenna with reverse SMA connector.
Reset button to return to the factory settings
WAN port for connecting a modem by means of a RJ-45 UTP Ethernet network cable.
LAN ports 1, 2, 3 and 4 for connecting computers by means of an RJ-45 UTP Ethernet network cable.
Power connector for connecting the power adaptor.
Connecting the Sweex Wireless Broadband Router 54 Mbps
1. Connect the power adaptor (included) to the rear of the router and the mains socket. The light next to “Poweris lit. In the event the LED is not
lit, check the connections of the power adaptor to the router and the mains socket.
2. Switch on the computer and connect it to the rear of the modem using a network cable (RJ-45 UTP). You can select any of the ports 1, 2, 3 and 4.
The corresponding light at the front will be lit. In the event the light fails to light up, check whether the network cable is properly connected to
the computer and the router.
3. Switch on the modem* again. Note: Here we do not refer to the Sweex router. Connect the modem to the rear of the router using a network
cable (RJ-45 UTP). Do this via the WAN port The WAN light at the front of the router will light up. In the event the light fails to light up, check
whether the network cable is properly connected to the router and the modem.
*In order to use the Sweex Wireless Broadband Router 54 Mbps you need an active Internet connection, which is established through a modem.
This modem is usually supplied by the provider.


Specyfikacje produktu

Marka: Sweex
Kategoria: router
Model: LW050UK

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sweex LW050UK, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje router Sweex

Sweex

Sweex MO250 Instrukcja

17 Września 2024
Sweex

Sweex LW160 Instrukcja

17 Września 2024
Sweex

Sweex LW320 300N Instrukcja

16 Września 2024
Sweex

Sweex MO201UK Instrukcja

15 Września 2024
Sweex

Sweex LW161 150N Instrukcja

15 Września 2024
Sweex

Sweex LW321 300N Instrukcja

15 Września 2024
Sweex

Sweex LW050UK Instrukcja

15 Września 2024
Sweex

Sweex CC400020 Instrukcja

14 Września 2024

Instrukcje router

Najnowsze instrukcje dla router

Netgear

Netgear LB2120 4G LTE Instrukcja

15 Października 2024
Linksys

Linksys WRT3200ACM Instrukcja

15 Października 2024
D-Link

D-Link DAP-1360 Instrukcja

15 Października 2024
TP-Link

TP-Link Archer AXE75 Instrukcja

14 Października 2024
Linksys

Linksys EA8500 Instrukcja

13 Października 2024
Totolink

Totolink ND300 Instrukcja

12 Października 2024
ZyXEL

ZyXEL LTE 7460 Instrukcja

10 Października 2024
Netgear

Netgear Nighthawk R7200 Instrukcja

10 Października 2024
Netgear

Netgear FR114P Instrukcja

10 Października 2024
Asus

Asus RT-BE86U Instrukcja

9 Października 2024