Instrukcja obsługi Swan SI3070N

Swan Żelazo SI3070N

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Swan SI3070N (4 stron) w kategorii Żelazo. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

design o ifeed f r l

v3.2

www.swan-brand.co.uk

Swan Products Ltd. PO Box 3117, Stoke-on-Trent ST4 9GD

We lov e

what we do

2 year

GU TEEARAN

we’re prou d

o o ual yf ur q it

Scan this QR code

to hear about

our story

Find us on Facebook

Dual Voltage Travel Iron

Model: SI3070N

Help line: 0871 200 0003

SI3070N.indd 2-3 14/10/2014 10:13

When using any electrical appliance, basic safety precautions should always be followed

including the following:

1. Always ensure that the voltage on the rating label corresponds to the mains

voltage in your home

2. Incorrect operation and improper use can damage the appliance and cause

injury to the user.

3. This appliance can be used by children aged from 8 years and above if they

have been given supervision or instruction concerning use of the appliance

in a safe way and if they understand the hazards involved. Cleaning and user

maintenance shall not be made by children unless they are older than 8 and

supervised. Keep the appliance and its cord out of reach of children aged

less than 8 years.Check the power cord and plug regularly for any damage.

If the cord or the plug is damaged, it must be replaced by the manufacturer

or qualified person in order to avoid an electrical hazard.Check the power

cord and plug regularly for any damage. If the cord or the plug is damaged,

it must be replaced by the manufacturer or qualified person in order to avoid

an electrical hazard.

4. Do not use the appliance if it has been dropped or damaged in any way. In

case of damage, take the unit in for examination and/or repair by an author

ised service agent.

5. Never immerse the unit in water or any other liquid for cleaning purposes.

6. Remove the plug from the socket by gripping the plug. Do not pull on the cord

to disconnect the appliance from the mains. Unplug the unit when not in use

or before cleaning

7. The use of accessory attachments that are not recommended or supplied by

the manufacturer may result in injuries, fire or electric shock.

8. Do not let the cord hang over the edge of a table or counter. Ensure that the

cord is not in a position where it can be pulled on inadvertently.

9. Do not allow the cord to touch hot surfaces and do not place on or near a hot

gas or electric burner or in a heated oven.

10. Do not use the appliance on a gas or electric cooking top or over or near an

open flame.

11. Use of an extension cord with this appliance is not recommended. However,

if it is necessary to use an extension lead, ensure that the lead is suited to the

power consumption of the appliance to avoid overheating of extension cord,

appliance or plug point. Do not place the extension cord in a position where it

can be pulled on by children or animals or tripped over.

12. This appliance is not suitable for outdoor use. Do not use the appliance for

anything other than its intended use.

13. Do not carry the appliance by the power cord.

14. Do not leave the appliance unattended during use.

15. Always operate the appliance on a smooth, even, stable surface. Do not place

the unit on a hot surface.

16. The manufacture does not accept responsibility for any damage or injury caused by

improper or incorrect use, or for repairs carried out by unauthorised personnel.

17. In case of technical problems, switch off the product and do not attempt

to repair it yourself. Return the appliance to an authorised service facility for

examination, adjustment or repair. Always insist on the use of original spare

parts. Failure to comply with the above mentions precautions and instructions,

could affect the safe operation of this product.

18. Your appliance must never be switched on through an external timer or any

kind of separate remote control system

Specication

Model No SI3070N.

110-120V/220V-240V~

50/60Hz 900-1100W

A. Soleplate

B. Main body

C. Steam shot button

D. Top panel

E. Steam Switch

F. Temperature dial

G. Water tank cover

IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS

PARTS

Temperature guide

SI3070N.indd 4-5 14/10/2014 10:13

Before first use

Remove any stickers, protective foil or storage cover from the

soleplate.

1. Select the correct voltage for your loca-

tion

2. Lift the Water Tank Cover (G) and fill with

water to the MAX level mark

3. Connect the iron to the mais supply and put

the Steam Switch (E) into the desired position

4. Select correct temperature according to

garment label. Note: Start with lower tempera-

ture garments first. The Steam Shot button

when higher temperature is selected.

5. After ironing, disconnect from mains supply,

allow to cool and empty water tank

Always check first whether a label with ironing instructions is attached to the article.

The iron heats up quicker than it cools down, therefore, you should start ironing the

articles requiring the lowest temperature such as those made of synthetic fibres.

If the fabric consists of various kinds of fibres, you must always select the lowest

ironing temperature to iron the composition of those fibres.

Silk and other fabrics that are likely to become shiny should be ironed on the inner

side.

To prevent staining do not spray water straight on silk or other delicate fabrics.

Velvet and other textures that rapidly become shiny should be ironed in one direction

with light pressure applied. Always keep the iron moving at any given moment.

Pure woollen fabrics (100% wool) may be ironed with the iron set a steam position.

Preferably set steam button to the maximum position and use a dry cloth as a mat.

Note: when ironing woolen fabrics, shining of the fabric may occur. So it is suggested

that you should turn the article inside out and iron the reverse side.

After ironing

Disconnect power supply, allow the iron to cool completely and empty the water left in water

tank. Reconnect the power supply and disconnect after indicator light goes off, this dries

the soleplate.

Let the iron completely cool down, then wipe flakes and any other deposits on the soleplate

with a damp cloth or a non-abrasive (liquid) cleaner. Clean the upper part of iron with a damp

cloth. Always store the emptied iron horizontally on a stable surface with a cloth protecting

the soleplate.

About limescale

If you live in a hard water area we recommend using bottled water for this iron. Excessive

limescale build-up will reduce ironing efficiency and shorten the life of the iron considerably.

HOW TO USE HOW TO USE

HOW TO USE

SI3070N.indd 6-7 14/10/2014 10:13

Specyfikacje produktu

Marka:	Swan
Kategoria:	Żelazo
Model:	SI3070N
Kolor produktu:	Grey, Purple, White
Pojemność zbiornika na wodę:	0.1 l
Regulowany termostat:	Tak
Bezprzewodowy:	Nie
Długość przewodu:	- m
Wysokość produktu:	170 mm
Szerokość produktu:	84 mm
Głębokość produktu:	93 mm
Waga produktu:	500 g
Szerokość opakowania:	195 mm
Wysokość opakowania:	110 mm
Głębokość opakowania:	120 mm
Waga wraz z opakowaniem:	600 g
Diody LED:	Ready
Model:	Żelazko suche i parowe
Silne uderzenie pary:	- g/min
Tworzywo podstawki/stopki:	Stopa ze stali nierdzewnej
Ciągły strumień pary:	- g/min
Moc żelazka:	900 W
Wskaźnik odpowiedniej temperatury:	Tak