Instrukcja obsługi SVS SoundPath Tri-Band Wireless Audio Adapter

SVS Niesklasyfikowane SoundPath Tri-Band Wireless Audio Adapter

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SVS SoundPath Tri-Band Wireless Audio Adapter (8 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
TRI-BAND WIRELESS AUDIO
ADAPTER
Owner’s Manual
Thank you for choosing SVS!
Congratulations on bringing home the , the SVS SoundPath Tri-Band Wireless Audio Adapter
best solution available for eliminating subwoofer cable clutter without sacrificing performance.
Because it passes a full-range Left/Right stereo signal, you can also wirelessly connect stereo
speakers, powered surround sound speakers, amplifiers, and any stereo audio component.
The SoundPath Tri-Band Wireless Audio Adapter operates in the 2.4 GHz, 5.2 GHz and 5.8 GHz
bands and is highly resistant to all forms of wireless interference from common household
devices. Seamless switching between channels ensures your subwoofer, speakers or other audio
components will remain connected in even the most congested wireless environments so you can
always enjoy uninterrupted listening experiences.
Installation requires only a few simple steps. If you have questions about subwoofer or speaker
placement, system optimization or installing the SVS SoundPath Tri-Band Wireless Audio Adapter,
please contact the SVS Sound Experts tech support 7-days-a-week.
custservice@svsound.com | 877.626.5623 | www.svsound.com
Specifications & Features
Adapter Includes
» Tri-Band Wireless Audio Transmitter
» Tri-Band Wireless Audio Receiver
» Mono RCA to RCA interconnect cable (x2)
» USB A to micro B power cable for power adaptor (x2)
» 5V DC power adapter with USB A Connector (x2)
» Velcro for securing devices (x2)
What You Will Need
» Output device (subwoofer, powered speakers or amplifier)
» Source device (AV receiver, surround processor, or 2-channel pre-amp with a subwoofer pre-out
or L/R line level pre-out)
Specifications
Operating Voltage
RF Frequency Band
Sample Rate
Working Distance
Transmitter analog input level
Receiver analog output level
Frequency Response
Latency
THD+N (dB)
SNR (dB)
Receiver
Minimum power requirement:
4.75V @0.3ARF
Tri-Band (auto switching)
2.4/5.2/5.8 GHz
48kHz
Up to 130 feet; line of sight
N/A
Maximum 1Vrms
6Hz – 20 kHz +/- 0.5 dB
< 19 milliseconds
-70 dB (10Hz – 20kHz)
+ 105 dB 10Hz – 20kHz
Transmitter
Minimum power requirement:
5V @0.5A
Tri-Band (auto switching)
2.4/5.2/5.8 GHz
48kHz
Up to 130 feet; line of sight
Maximum 2Vrms
N/A
6Hz – 20 kHz +/- 0.5 dB
< 19 milliseconds
-70 dB (10Hz – 20kHz)
+ 105 dB 10Hz – 20kHz
General Placement and Set-up Tips
» Place the subwoofer, powered speaker or amplifier at its intended location.
» Try to maintain line-of-sight (no walls or solid barriers) between the transmitter
and receiver for best results.
» Receiver should be within 130 feet of transmitter for best results.
» Avoid placing the transmitter next to devices that could create signal interference, such as mobile
phones, baby monitors, RF wireless phones and Wi-Fi routers.
Connecting the Wireless Transmitter to an AV processor
1. Connect the mono RCA cable to the subwoofer out or LFE channel of the AVR or pre-amp
processor to the R/LFE input on the wireless transmitter.
2. Connect the USB A to Micro B cable to the wireless transmitter and the included 5 VDC power
supply. You can also use an available USB charging port with an output of at least 5V @ 0.5A
3. If using the 5 VDC power supply, connect to nearby power outlet.
Connecting the Wireless Transmitter to a 2-channel stereo pre-amp
1. Connect a stereo RCA cable to the L and R line level pre-outs of the 2-channel stereo
pre-amp and to L and R input on the wireless transmitter. – CABLE NOT SUPPLIED
2. Connect the USB A to Micro B cable to the wireless transmitter and the included 5 VDC
power supply. You can also use an available USB charging port with an output of at
least 5V @0.5A
3. If using the 5 VDC power supply, connect to nearby power outlet.
CENTER
REAR FR
SUBWOOFER
(SUB1)
LINE LEVEL OUTPUTS
dio In
RECEIVER/PREAMP
Audio In
(Transmitter)
L
P Power air
R
LINE LEVEL OUTPUTS REAR FRONT
R
L
RECEIVER/PREAMP
Audio In
(Transmitter)
L
P Power air
R

Specyfikacje produktu

Marka: SVS
Kategoria: Niesklasyfikowane
Model: SoundPath Tri-Band Wireless Audio Adapter

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z SVS SoundPath Tri-Band Wireless Audio Adapter, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane SVS

SVS

SVS SoundPath Speaker Level Subwoofer Adapter Instrukcja

7 Października 2024
SVS

SVS SoundPath Wireless Audio Adapter Instrukcja

28 Września 2024
SVS

SVS SoundPath Tri-Band Wireless Audio Adapter Instrukcja

28 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024