Instrukcja obsługi SuperTooth Disco 3

SuperTooth głośnik Disco 3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SuperTooth Disco 3 (8 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

*A2DP (Advanced Audio Distribution Prole) is a technology enabling to

stream stereo sound from an audio source (phone, pc, laptop, tablet, MP3

player) to a stereo speaker or headset via Bluetooth. To do so both devices

must support this prole.

Using the SUPERTOOTH DISCO 3 with your

Bluetooth A2DP phone / device

Important : The DISCO 3 needs to be “paired” with your

Bluetooth A2DP phone / device rst. Please refer to “Pairing

the SUPERTOOTH DISCO 3 with your Bluetooth A2DP phone /

device” section.

Reconnecting the SUPERTOOTH DISCO 3 with a Bluetooth

A2DP phone / device already paired

When you turn it on, the DISCO 3 reconnects automatically

with the latest paired device. When you leave the Bluetooth

operating range, with the DISCO 3 turned ON, it disconnects.

When you come back into the Bluetooth operating range,

press the Play / Pause Button for 1 second to reconnect the (3)

latest paired device. The DISCO 3 beeps twice.

Streaming music from a Bluetooth A2DP phone / device

1. Go to your device music player and play a track by pressing

“Play” or the Play / Pause Button for 1 second. If the (3)

DISCO 3 is connected, the music will be heard directly in the

speaker. See your device manual if needed.

2. Audio is now on the DISCO 3. The Play / Pause Indicator (3)

turns steady white, indicating that the device is connected

and streaming music via the DISCO 3.

3. When it is connected, you can control the music using the

buttons of the DISCO 3. Please refer to “SUPERTOOTH

DISCO 3 Button Functions” section.

Using the SUPERTOOTH DISCO 3 with a non

Bluetooth A2DP Mp3 Player

You can connect directly an Mp3 player via the Stereo Line

Input situated at the back of the DISCO 3.(9)

Connecting re tl di c y a non Bluetooth A2DP Mp3 player with

the SUPERTOOTH DISCO 3

1. Plug one end of the supplied audio cable into the Stereo

Line Input and the other end into the output of your (9)

music player.

2. Press “Play” on your Mp3 player to stream music directly via

the DISCO 3.

3. Non Bluetooth devices won’t support Play / Pause / Previous

/ Next commands from the DISCO 3. Please use the buttons

of your Mp3 player directly.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such

marks by Eur CB is under license. Other trademarks and trade names are those of their respective owners.o-

logo are trademarks of CSR plc or one of its group companies and may be registered in one or more jurisdictions. DISCO 3

USER GUIDE

The SUPERTOOTH DISCO 3 is a portable, wireless stereo

speaker featuring an avant-garde design and compact

footprint.

Users can stream music wirelessly from any cell phone,

tablet, computer, laptop or Mp3 player supporting

Bluetooth A2DP.

The SUPERTOOTH DISCO 3 kicks out 12 watts RMS audio

power, with two high eciency speakers on the front

and a bass reex system situated at the back of the unit.

The integrated rechargeable battery ensures 3 to 4

hours of non-stop, maximum-volume music, and up to

15 hours of moderately played melodies.

The SUPERTOOTH DISCO 3 comes with a 3.5 mm stereo

jack cable for devices that do not support Bluetooth

A2DP.

Charging

1. Connect the USB Cable to the DC 5V USB Input found at (7)

the back of the DISCO 3 then connect the other end of the

USB Cable to your Computer or USB power supply.

2. The Charge Indicator is steady red while charging. (8)

Charging is complete when the Charge indicator goes (8)

green.

Turning the SUPERTOOTH DISCO 3 On and O

Power On : Press and hold the On / O Button for 2 seconds. (6)

A power on beep is heard in the speaker, Play / Pause Indicator

(3) will blink for 2 seconds.

Note 1 : At rst time use, when you turn it on, the DISCO 3 goes

to pairing mode automatically (ready to be paired with your

phone / device).

Note 2 : If you are not playing music, the DISCO 3 goes to

standby mode automatically after a few seconds. To check it is

turned on, press any button. Play / Pause Indicator will ash.(3)

Power O : Press and hold the On / O Button for 3 seconds.(6)

A power o beep is heard in the speaker.

Pairing the SUPERTOOTH DISCO 3 with your

Bluetooth A2DP phone / device.

Pair the DISCO 3 to your phone / device to create the link or

audio connection between the two. Pairing should be done at

rst connection to a phone / device.

Important : Make sure that your phone / device supports A2DP*

(Advanced Audio Distribution Prole) before proceeding.

1. If the Disco 3 is o, press the On / O button for 2 seconds, (6)

to switch it on.

2. If this is the rst time you are turning on the Disco 3, the Play /

Pause (3) button blinks red fast. This indicates that the DISCO

3 is ready to be pair.

If the Play / Pause button is not fast blinking red, press and (3)

hold the Play / Pause button for 3 seconds (until the unit (3)

beeps twice). The Play / Pause button should blink red (3)

now and the Disco 3 is ready to pair.

3. While the DISCO 3 is in pairing mode, access the Bluetooth

menu of your device. Turn on its Bluetooth function then

execute a Bluetooth search to nd the DISCO 3. (See your

device manual).

4. When your device displays the list of Bluetooth devices, select

ST DISCO3.

5. If your device asks for the password / pin code, enter 0000 and

press OK.

6. The Disco 3 beeps twice. It is ready to use with your device.

Federal Communications Commission (FCC) Statement

Industry Canada (IC) Statement

15.21

You are cautioned that changes or modications not expressly approved by the part responsible

for compliance could void the user’s authority to ope te the equipme .ra nt

15.105(b)

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC/IC rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipmen tes, t genera

uses and can radiate radio frequency energy and, if not installed and used in a ordance with cc

the instructions, may rmful interference to radio communications. However, there is no cause ha

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment o and on, the user is encouraged to try to correct the interference by one or more of

the following measures :

- Reorient or relocate the receiving antenna.

- Increase the sepa tion between the equipment and receiver.ra

- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules and Industry Canada licence-exempt RSS standard(s)

Ope tion is subject to the following two conditions :ra

1) This device may not cause interference and

2) This devi e must a ept a y i , including i e th t m y cause undesic cc n nterference nterferenc a a red

ope tion of the device.ra

FCC/IC RF Radiation Exposure Statement :

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled

environment. End users must follow the specic operating instructions for satisfying RF exposure

compliance. This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(A Eur European countr rate collection pplicable in the opean Union and other ies with sepa

systems). This marking shown on the product or its literature, indicates that it should not

be disposed with other household wastes at the end of its working life. To prevent

possible harm to the environment or human health from uncontrolled waste disposal,

please sepa te this fr t wast recy responsibly t romotra om other ypes of es and cle it o p e the

sustainable r aterial resourceseuse of m . Household users should contact either the retailer where

they purchased this product, or their local government oce, for details of whe e and h w they r o

can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase

contract. This product should not be mixed with other commercial wastes for disposal.

This product has an embedded, non-replaceable battery, do not attempt to open the product or

remove the battery as this may ry and damage the product. Please contact the local cause inju

recycling facility for removal of the battery. The embedded, non-replac atter gned eable b y is desi

to last the life time of the product.

Hereby, EURO COMMUNICATION EQUIPEMENTS, represented by MARCHANT, CEO, declares Xavier

that the MODEL BTD3, is in compliance with the essential requirements SUPERTOOTH DISCO 3,

and other relevant provisions of Directive 1999/5/EC of the European Parliamen of the t and

Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and

the mutual recognition of their conformity.

To download the user guide in

full version please go to

www.supertooth.net

For the whole declaration please visit : http://www.supertooth.net/download

Euro Communication Equipements SAS

Route de Foix D117

11500 NEBIAS (FRANCE)

Pairing code

0 0 0 0

Pairing code

0 0 0 0

Pantone 286 CFoldingCutting

Specications :

Bluetooth Compliance :

Bluetooth version 4.0 specications

Supported Bluetooth Proles :

- A2DP (Advanced Audio Distribution Prole)

- Stereo music streaming

- AVRCP (Audio / Video Remote Control Prole)

- aptX® (High quality Bluetooth audio codec)

Operating Range :

10 meters Bluetooth standard

Frequency :

2.4 GHZ

Battery and Battery Life :

- Battery type : Lithium-Ion Power pack battery

- Music playing time (maximum volume level) : 3 to 4 hours

- Music playing time (medium volume) : 15 hours

- Stand-by time : 2000 hours

- Charging time : 3 hours (charger >0.7A)

Audio Features :

- Dual high eciency speakers + bass reex

- 12 Watt RMS power

- Compatible with any Bluetooth A2DP phone, PC, laptop, tablet

or Mp3 player

- Jack 3.5 auxiliary input for non Bluetooth A2DP Mp3 players,

iPods or computers

- Wireless Play / Previous / Next / Pause / Volume control (AVRCP

standard)

Multipairing :

- Maximum 8 phones paired

- 1 phone connected at a time

Special Features :

- Low battery / Charging indicator

- Can charge from the computer USB socket

Size and Weight :

- Height : 180 mm

- Width : 108 mm

- Depth : 70 mm

- Weight : 546 g

Accessories :

- Travel charger

- 3.5 mm stereo jack cable

- USB cable (*) To access those commands, your phone / device must support Bluetooth AVRCP* (Audio/Video Remote Control Prole), a technology enabling to control functions directly from the DISCO 3.

(**) If supported by phone

SUPERTOOTH DISCO 3 Button Functions

The following buttons can be used to control functions on the SUPERTOOTH DISCO 3.

(5) Volume Up

• Press for 1 second for higher volume

• Long press to reach desired volume level

(7) Charge Port

USB 5V Input

(6) On / O Button

• Press for 2 seconds to switch ON

• Press for 3 seconds to switch OFF

(1) Volume Down