Instrukcja obsługi Supermicro SuperServer F628R3-FC0PT+

Supermicro Server SuperServer F628R3-FC0PT+

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro SuperServer F628R3-FC0PT+ (156 stron) w kategorii Server. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/156
FatTwin®
F628R3-FC0+
F628R3-FC0PT+
USER’S MANUAL
Revision 1.0a
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Revision 1.0a
Release Date: July 14, 2016
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2016 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America

Specyfikacje produktu

Marka: Supermicro
Kategoria: Server
Model: SuperServer F628R3-FC0PT+

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Supermicro SuperServer F628R3-FC0PT+, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Server Supermicro

Instrukcje Server

Najnowsze instrukcje dla Server

ATen

ATen SN0132 Instrukcja

19 Września 2024
ATen

ATen SN9108CO Instrukcja

19 Września 2024
Axis

Axis M7104 Instrukcja

19 Września 2024
Lindy

Lindy 32700 Instrukcja

19 Września 2024
Axis

Axis P7224 Instrukcja

18 Września 2024
Digi

Digi Connect IT 48 Instrukcja

18 Września 2024
ATen

ATen SN3402 Instrukcja

18 Września 2024
SEH

SEH myUTN-50a Instrukcja

17 Września 2024