Instrukcja obsługi Supermicro SuperServer F618R2-FC0

Supermicro serwer SuperServer F618R2-FC0

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro SuperServer F618R2-FC0 (148 stron) w kategorii serwer. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/148

USER'S MANUAL

Revision 1.0b

FatTwin

F618R2-FC0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0b

Release Date: March 12, 2019

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the FatTwin™ F618R2-FC0.

Installation and maintenance should be performed by experienced technicians only.

The FatTwin F618R2-FC0 is a high-end server based on the SCF418IL-R1K62BP

4U rackmount chassis and the dual processor X10DRFF-C serverboard.

Manual Organization

Chapter 1: Introduction

The rst chapter provides a checklist of the main components included with the

server system and describes the main features of the X10DRFF-C serverboard and

the SCF418IL-R1K62BP chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the FatTwin F618R2-FC0 into

a rack and check out the server conguration prior to powering up the system. If

your server was ordered without processor and memory components, this chapter

will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

FatTwin F618R2-FC0.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X10DRFF-C serverboard, including

the locations and functions of connections, headers and jumpers. Refer to this

chapter when adding or removing processors or main memory and when re-

conguring the serverboard.

Specyfikacje produktu

Marka:	Supermicro
Kategoria:	serwer
Model:	SuperServer F618R2-FC0
Kolor produktu:	Czarny
Wbudowany wyłącznik:	Tak
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	100 - 240 V
Wysokość produktu:	177 mm
Szerokość produktu:	448 mm
Głębokość produktu:	737 mm
Waga produktu:	68040 g
Szerokość opakowania:	719 mm
Wysokość opakowania:	381 mm
Głębokość opakowania:	1077 mm
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Prędkość transferu danych przez Ethernet LAN:	10,100,300,1000 Mbit/s
Ilość portów Ethernet LAN (RJ-45):	2
Zakres temperatur (eksploatacja):	10 - 35 °C
Zakres wilgotności względnej:	8 - 90 %
Przewodowa sieć LAN:	Tak
Waga wraz z opakowaniem:	90710 g
Diody LED:	LAN, Power
Zakres temperatur (przechowywanie):	-40 - 70 °C
Dopuszczalna wilgotność względna:	5 - 95 %
Ilość obsługiwanych rozmiarów dysków pamięci:	2
Obsługiwane rodzaje dysków:	HDD
Obsługiwane rozmiary dysków pamięci:	2.5 "
Ilość portów USB 3.2 Gen 1 (3.1 Gen 1) Typu-A:	2
Obudowa:	Rack (4U)
Rodzaj chłodzenia:	Aktywne
Liczba wentylatorów:	8 went.
Obsługiwane rodzaje pamięci:	DDR4-SDRAM
Maksymalna pojemność pamięci:	1024 GB
Gniazdo procesora:	LGA 2011-v3
Układ płyty głównej:	Intel® C612
Poziomy raid:	0, 1
Typ BIOS:	EEPROM
Zasilanie:	1620 W
Prąd wejściowy:	12 A
Gniazda PCI Express x16 (Gen 3.x):	1
Wspierane interfejsy dysków twardych:	Serial Attached SCSI (SAS)-3
Rodzaj interfejsu sieci Ethernet:	Gigabit Ethernet
Kontroler LAN:	Intel I210
Liczba portów VGA (D-Sub):	1
Obsługa funkcji Plug & Play:	Tak
Korekcja ECC:	Tak
Rozmiar pamięci BIOS:	128000 Mbit
Wersja ACPI:	4.0
Wersja systemu BIOS (SMBIOS):	2.7.1
Technologia okablowania Copper Ethernet:	10BASE-T, 100BASE-TX, 1000BASE-T
Ilość zatok 2,5 ":	2
Wskaźnik magistrali systemowej:	9.6 GT/s
Termiczny układ zasilania (TDP):	145 W
Model karty graficznej on-board:	Aspeed AST2400
Seria procesora:	Intel Xeon E5-2600 v4
Napięcie pamięci:	1.2 V
Intel® Xeon series:	E5-2600
Ilość slotów DIMM:	8
Liczba obsługiwanych procesorów:	2
Prędkość zegara pamięci RDIMM:	1600,1866,2133,2400 MHz
Przemieszczanie twardej wnęki na napęd HDD:	Tak
Certyfikat 80 PLUS:	80 PLUS Platinum
Średnica czaszy wentylatora:	80 mm
Maksymalna pojemność pamięci RDIMM:	512 GB
Obsługuje rozmiary DIMM:	4GB, 8GB, 16GB, 32GB, 64GB, 128GB
Prąd stały (+5 V):	4 A
Prąd stały (+12 V):	150 A
Port IPMI LAN (RJ-45):	Tak
Maksymalna pamięć podręczna:	55 MB
Wersja UEFI:	2.3.1
Funkcje BIOS:	PCI 2.3, Plug & Play, SMBIOS 2.7.1