Instrukcja obsługi Supermicro SuperServer E200-8B

Supermicro serwer SuperServer E200-8B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro SuperServer E200-8B (92 stron) w kategorii serwer. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/92

SUPER ®

USER'S MANUAL

Revision 1.0

SuperServer®

E200-8B

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0

Release Date: January 12, 2015

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use of the server. Installation and

maintainance should be performed by experienced technicians only.

Please refer to the server specications page on our Web site for updates on

supported memory, processors and operating systems (www.supermicro.com).

Preface

Specyfikacje produktu

Marka:	Supermicro
Kategoria:	serwer
Model:	SuperServer E200-8B
Kolor produktu:	Czarny
Wbudowany wyłącznik:	Tak
Wysokość produktu:	43 mm
Szerokość produktu:	195 mm
Głębokość produktu:	195 mm
Waga produktu:	1750 g
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Prędkość transferu danych przez Ethernet LAN:	10,100,1000 Mbit/s
Ilość portów Ethernet LAN (RJ-45):	2
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	10 - 85 %
Typ procesora:	Intel
Liczba portów USB 2.0:	1
Przewodowa sieć LAN:	Tak
Diody LED:	Tak
Zakres temperatur (przechowywanie):	-40 - 70 °C
Dopuszczalna wilgotność względna:	10 - 95 %
Ilość obsługiwanych rozmiarów dysków pamięci:	1
Obsługiwane rozmiary dysków pamięci:	2.5 "
Ilość portów USB 3.2 Gen 1 (3.1 Gen 1) Typu-A:	1
Liczba wentylatorów:	1 went.
Obsługiwane rodzaje pamięci:	DDR3-SDRAM
Bez kody korekcyjnego:	Tak
Maksymalna pojemność pamięci:	8 GB
Gniazdo procesora:	BGA 1170
Procesor:	Intel® Celeron®
Poziomy raid:	0, 1,10
Typ BIOS:	EEPROM
Ilość złączy SATA III:	4
Zasilanie:	60 W
Wspierane interfejsy dysków twardych:	Serial ATA II, Serial ATA III
Rodzaj interfejsu sieci Ethernet:	Fast Ethernet, Gigabit Ethernet
Kontroler LAN:	Intel® I210-AT
Liczba portów VGA (D-Sub):	1
Typ zasilacza:	DC
Dołączone oprogramowanie:	SuperDoctor® 5\r\nWatch Dog
Rozmiar pamięci BIOS:	64 Mbit
Wersja ACPI:	5.0
Moduł TPM (Trusted Platform Module):	Tak
Wersja TPM:	1.2
Model karty graficznej on-board:	Intel® HD Graphics
Rodzaj pamięci:	204-pin SO-DIMM
Napięcie pamięci:	1.35 V
Ilość slotów DIMM:	2
Liczba obsługiwanych procesorów:	1
Średnica czaszy wentylatora:	40 mm
Ilość złączy SATA II:	2
Wspierane taktowanie procesora (max):	2.42 GHz
Obsługuje rozmiary DIMM:	2GB, 4GB
Maksymalna pamięć podręczna:	2 MB
Funkcje BIOS:	Plug & Play, UEFI