Instrukcja obsługi Supermicro SuperServer 6037R-72RFT+

Supermicro serwer SuperServer 6037R-72RFT+

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro SuperServer 6037R-72RFT+ (124 stron) w kategorii serwer. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/124

S SUPER ERVER

6037R-72RFT+

SUPER

USER’S MANUAL

1.0a

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0a

Release Date: June 21, 2013

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 6037R-72RFT+.

Installation and maintainance should be performed by experienced technicians only.

The SuperServer 6037R-72RFT+ is a high-end server based on the SC835BTQ-

R1K28BP 3U rackmount chassis and the X9DR7-TF+ dual processor serverboard.

Manual Organization

Chapter 1: Introduction

The ﬁ rst chapter provides a checklist of the main components included with the

server system and describes the main features of the X9DR7-TF+ serverboard and

the SC835BTQ-R1K28BP chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 6037R-

72RFT+ into a rack and check out the server conﬁ guration prior to powering up the

system. If your server was ordered without processor and memory components, this

chapter will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Warning Statements

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 6037R-72RFT+.

Specyfikacje produktu

Marka:	Supermicro
Kategoria:	serwer
Model:	SuperServer 6037R-72RFT+
Wysokość produktu:	648 mm
Szerokość produktu:	437 mm
Głębokość produktu:	132 mm
Waga produktu:	34000 g
Ilość portów Ethernet LAN (RJ-45):	3
Zakres temperatur (eksploatacja):	10 - 35 °C
Zakres wilgotności względnej:	8 - 90 %
Taktowanie procesora:	0 GHz
Typ procesora:	Rodzina procesorów Intel® Xeon® E5 V2
Liczba portów USB 2.0:	4
Przewodowa sieć LAN:	Tak
Obudowa:	Rack (3U)
Maksymalna pojemność pamięci:	1500 GB
Gniazdo procesora:	LGA 2011 (Socket R)
Układ płyty głównej:	Intel® C602J
Poziomy raid:	0, 1,5, 10
Typ BIOS:	UEFI
Ilość złączy SATA III:	6
Zasilanie:	1280 W
Kontroler LAN:	Intel® X540
Liczba portów VGA (D-Sub):	1
System operacyjny:	32 bit Window OS, 32 bit Linux OS, 64 bit Window OS, 64 bit Linux OS, VMware OS *, Citrix.
Korekcja ECC:	Tak
Gniazda pamięci:	24
Liczba procesorów:	2
Wskaźnik magistrali systemowej:	9.6 GT/s
Obsługa zasilania zapasowego (RPS):	Tak
Szeregowe porty komunikacyjne:	2
Napędy optyczne:	Nie
Liczba portów SAS:	8