Instrukcja obsługi Supermicro SuperServer 6028R-WTRT

Supermicro serwer SuperServer 6028R-WTRT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro SuperServer 6028R-WTRT (14 stron) w kategorii serwer. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/14

SUPERSERVER

6028R-WTR

6028R-WTRT

SUPER

USER’S MANUAL

Revision 1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall be

the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims

will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0

Release Date: August 14, 2014

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 6028R-WTR(T).

Installation and maintainance should be performed by experienced technicians only.

The SuperServer 6028R-WTR(T) is a high-end server based on the

SC815TS-R740WBP 2U rackmountable chassis and the X10DRW-i(T) dual

processor serverboard. The SuperServer 6028R-WTR(T) system's WIO platform

has major advantages over E-ATX/ATX platforms in small form factor 1U and 2U

systems by increasing I/O performance by use of multiple full-height, full-length

add-on cards. Please refer to our web site for updates on supported processors.

The only difference between the 6028R-WTR and 6028R-WTRT servers is that

the 6028R-WTR use 1Gps dual LAN ports and the 6028R-WTRT uses 10Gps dual

LAN ports.

Manual Organization

Chapter 1: Introduction

The ﬁ rst chapter provides a checklist of the main components included with the

server system and describes the main features of the X10DRW-i(T) serverboard

and the SC815TS-R740WBP chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 6028R-WTR(T)

into a rack and check out the server conﬁ guration prior to powering up the system.

If your server was ordered without processor and memory components, this chapter

will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 6028R-WTR(T).

Specyfikacje produktu

Marka:	Supermicro
Kategoria:	serwer
Model:	SuperServer 6028R-WTRT
Kolor produktu:	Czarny
Wbudowany wyłącznik:	Tak
Wysokość produktu:	89 mm
Szerokość produktu:	437 mm
Głębokość produktu:	648 mm
Waga produktu:	23600 g
Prędkość transferu danych przez Ethernet LAN:	10,100,1000 Mbit/s
Ilość portów Ethernet LAN (RJ-45):	3
Zakres temperatur (eksploatacja):	10 - 35 °C
Zakres wilgotności względnej:	8 - 90 %
Typ procesora:	Intel® Xeon E5 v3
Kod zharmonizowanego systemu (HS):	84714100
Przewodowa sieć LAN:	Tak
Diody LED:	Tak
Zakres temperatur (przechowywanie):	-40 - 70 °C
Dopuszczalna wilgotność względna:	5 - 95 %
Ilość obsługiwanych rozmiarów dysków pamięci:	8
Obsługiwane rozmiary dysków pamięci:	3.5 "
Ilość portów USB 3.2 Gen 1 (3.1 Gen 1) Typu-A:	6
Obudowa:	Rack (2U)
Obsługiwane rodzaje pamięci:	DDR4-SDRAM
Maksymalna pojemność pamięci:	1000 GB
Gniazdo procesora:	LGA 2011 (Socket R)
Procesor:	Intel® Xeon®
Układ płyty głównej:	Intel® C612
Poziomy raid:	0, 1,5, 10
Typ BIOS:	AMI
Zasilanie:	740 W
Rodzaj interfejsu sieci Ethernet:	Fast Ethernet, Gigabit Ethernet
Kontroler LAN:	Intel® X540
Liczba portów VGA (D-Sub):	1
Korekcja ECC:	Tak
Rozmiar pamięci BIOS:	128 Mbit
Wersja ACPI:	4.0
Technologia okablowania Copper Ethernet:	1000BASE-T, 100BASE-TX, 10BASE-T
Wskaźnik magistrali systemowej:	9.6 GT/s
Model karty graficznej on-board:	Aspeed AST2400
Szeregowe porty komunikacyjne:	1
Napędy optyczne:	DVD-ROM
Napięcie pamięci:	1.2 V
Intel® Xeon series:	E5-2600
Ilość slotów DIMM:	16
Liczba obsługiwanych procesorów:	2
Przemieszczanie twardej wnęki na napęd HDD:	Tak
Maksymalna pojemność pamięci RDIMM:	32 GB
PCI Express x8 slots:	4
Port IPMI LAN (RJ-45):	Tak
Funkcje BIOS:	APM 1.2, PCI 2.2, SMBIOS 2.3, UEFI