Instrukcja obsługi Supermicro SuperServer 5028D-TN4T

Supermicro serwer SuperServer 5028D-TN4T

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro SuperServer 5028D-TN4T (120 stron) w kategorii serwer. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/120

USER’S MANUAL

Revision 1.0b

S SUPER ERVER®

5028D-TN4T

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0b

Release Date: February 22, 2016

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About this Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer. Installation and

maintainance should be performed by experienced technicians only.

Please refer to the server specications page on our Web site for updates on

supported memory, processors and operating systems (http://www.supermicro.

com).

This manual may be periodically updated without notice. Please check the

Supermicro Web site for possible updates to the manual revision level.

Warnings

Special attention should be given to the following symbols used in this manual.

Warning! Indicates high voltage may be encountered when performing

a procedure.

Warning! Indicates important information given to prevent equipment/

property damage or personal injury.

Specyfikacje produktu

Marka:	Supermicro
Kategoria:	serwer
Model:	SuperServer 5028D-TN4T
Kolor produktu:	Czarny
Wbudowany wyłącznik:	Tak
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	100 - 240 V
Wysokość produktu:	240 mm
Szerokość produktu:	210 mm
Głębokość produktu:	279 mm
Waga produktu:	6800 g
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Procesor wbudowany:	Tak
Prędkość transferu danych przez Ethernet LAN:	10,100,1000 Mbit/s
Ilość portów Ethernet LAN (RJ-45):	5
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	10 - 85 %
Taktowanie procesora:	2.1 GHz
Typ procesora:	Intel
Model procesora:	D-1541
Kod zharmonizowanego systemu (HS):	84714100
Liczba portów USB 2.0:	2
Przewodowa sieć LAN:	Tak
Diody LED:	Tak
Zakres temperatur (przechowywanie):	-20 - 60 °C
Dopuszczalna wilgotność względna:	10 - 95 %
Ilość obsługiwanych rozmiarów dysków pamięci:	6
Obsługiwane rozmiary dysków pamięci:	2.5, 3.5 "
Ilość portów USB 3.2 Gen 1 (3.1 Gen 1) Typu-A:	2
Obsługiwane rodzaje pamięci:	DDR4-SDRAM
Bez kody korekcyjnego:	Tak
Maksymalna pojemność pamięci:	128 GB
Gniazdo procesora:	BGA 1667
Procesor:	Intel® Xeon®
Typ BIOS:	AMI
PCI Express x16 gniazda:	1
Ilość złączy SATA III:	6
Zasilanie:	250 W
Wspierane interfejsy dysków twardych:	Serial ATA III
Rodzaj interfejsu sieci Ethernet:	Fast Ethernet, Gigabit Ethernet
Kontroler LAN:	Intel I350-AM2, Realtek RTL8201N
Liczba portów VGA (D-Sub):	1
Korekcja ECC:	Tak
Rozmiar pamięci BIOS:	16 Mbit
Wersja ACPI:	4.0
Technologia okablowania Copper Ethernet:	1000BASE-T, 100BASE-T, 10BASE-T
Maksymalna konfiguracja CPU:	1
Technologia Wirtualizacji Intel® (Directed I/O) (VT-d):	Tak
Wbudowane opcje dostępne:	Nie
Moduł TPM (Trusted Platform Module):	Tak
Wersja TPM:	1.2
Model karty graficznej on-board:	Aspeed AST2400
Szeregowe porty komunikacyjne:	1
Napięcie pamięci:	1.2 V
Intel® Xeon series:	D-1500
Ilość slotów DIMM:	4
Liczba obsługiwanych procesorów:	1
Przemieszczanie twardej wnęki na napęd HDD:	Tak
PCI Express x4 slots:	1
Maksymalna pojemność pamięci RDIMM:	128 GB
Maksymalna pojemność pamięci UDIMM:	64 GB
Obsługuje rozmiary DIMM:	16GB, 32GB, 4GB, 8GB
Obsługa IPMI:	Tak
Funkcje BIOS:	APM 1.2, PCI 2.2, Plug & Play, UEFI